mirror of
https://github.com/torvalds/linux.git
synced 2026-05-24 15:12:13 +02:00
AT91 device tree updates for 6.3 #2
It contains: - cleanups arround flexcom nodes on SAM9X60 SoC as follows: - preserve same ID for flexcoms and the embedded nodes (e.g. flx4 will embed uart4, spi4, i2c4 but not e.g. uart1, spi2, i2c3); - SoC specific bindings were moved from board specific file to SoC specific file - DMA bindings for all flexcom nodes were added - SoC file was filled with missing flexcom nodes - new SAM9X60 Curiosity board that contains 1 uSDcard interface, 1 SDcard interface, 1 USB device interface, 2 USB Type-A interfaces, 2 CAN interfaces, 1 10/100 Ethernet interface, 1 LCD RGB666 interface, 1 Gb DDR2, 4 Gb NAND Flash, 2Kb EEPROM, leds, button, power regulators, UART and JTAG connectors -----BEGIN PGP SIGNATURE----- iHUEABYIAB0WIQTsZ8eserC1pmhwqDmejrg/N2X7/QUCY+N5WwAKCRCejrg/N2X7 /QIbAQCQ5aARiG6B3IglSdVTQk8a+CRWpelxB9CMCXEohhRkhgD+JS6XRejjoF78 cj3J30OP1SnkZQtTOygxEtmaxEMHNw0= =gcby -----END PGP SIGNATURE----- gpgsig -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmPk71QACgkQmmx57+YA GNl+bBAAs549afzrf1oU7Iix5uMbSP77kUOB7g+SggOIEK0W5WDixbrklEBQ8X1t pZcRFDi/Z00o+Trxo6o0M4mlTu3nfO6uwbaCOpYZKjrZ4KLmzGd+EwPyEpWblHRF DdAtaU0NvPXcarb28Yf22mtx4p1O22KZOZ2FUMxrCVIH0IFVH7Lx8wu//kZjAclv 69/pG+MeXj9b0winnWx4/AhwpxWS1eX+phy6xymxTbw7uu1EPJ1L5Ho3VmjsDczR daHKsxsJfv6ht1KMHSNBAWOj/fMsK3FnuP3oIFV7vLGcM4pEupuQ2SVOnCKTLYyY AW4lIwfQe09ayNcI9X8Wj3cK/CQw75B6sMprxGTJrRz0yXlrZL3cpGtp+e2mECI2 MV6Yje9SsefpfGFMdKPUsKJ5Pn5QOmzvMELYwjhzXY22lyVGsqVUOMCMNnArHKSq BnpvZi9SpNleAtV2kHoFhCpoLCRoOiQb/n0kw+LBnXjO0Zc2m79cxN8lHY2XsYD2 OauFJ+DCuBVQmtQUSDtsnlUeUgC24O1CgZu3rfISZ7W0y6+OQT9TeWhMQvfOte3A sqJ7WPTFjrtpxgsFfzAgHCdfkF8sF6KqwNJZLws98fi9mTN7WRBIXcY8nQpljKjp WED1dUVaOt0B8YpQhYrlA8nCraroMOWjBrRPaP31HsGM7O9roOw= =Oe5O -----END PGP SIGNATURE----- Merge tag 'at91-dt-6.3-2' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into arm/dt AT91 device tree updates for 6.3 #2 It contains: - cleanups arround flexcom nodes on SAM9X60 SoC as follows: - preserve same ID for flexcoms and the embedded nodes (e.g. flx4 will embed uart4, spi4, i2c4 but not e.g. uart1, spi2, i2c3); - SoC specific bindings were moved from board specific file to SoC specific file - DMA bindings for all flexcom nodes were added - SoC file was filled with missing flexcom nodes - new SAM9X60 Curiosity board that contains 1 uSDcard interface, 1 SDcard interface, 1 USB device interface, 2 USB Type-A interfaces, 2 CAN interfaces, 1 10/100 Ethernet interface, 1 LCD RGB666 interface, 1 Gb DDR2, 4 Gb NAND Flash, 2Kb EEPROM, leds, button, power regulators, UART and JTAG connectors * tag 'at91-dt-6.3-2' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux: ARM: dts: at91: sam9x60_curiosity: Add device tree for sam9x60 curiosity board dt-bindings: arm: at91: Add info on sam9x60 curiosity ARM: dts: at91: sam9x60: Add missing flexcom definitions ARM: dts: at91: sam9x60: Add DMA bindings for the flexcom nodes ARM: dts: at91: sam9x60: Specify the FIFO size for the Flexcom UART ARM: dts: at91: sam9x60: fix spi4 node ARM: dts: at91: sam9x60: move flexcom definitions ARM: dts: at91: sam9x60: Fix the label numbering for the flexcom functions Link: https://lore.kernel.org/r/20230209084930.289721-1-claudiu.beznea@microchip.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This commit is contained in:
Arnd Bergmann
commit
306b8201b0
|
|
@ -91,9 +91,11 @@ properties:
|
|||
- const: atmel,sama5d2
|
||||
- const: atmel,sama5
|
||||
|
||||
- description: SAM9X60-EK board
|
||||
- description: Microchip SAM9X60 Evaluation Boards
|
||||
items:
|
||||
- const: microchip,sam9x60ek
|
||||
- enum:
|
||||
- microchip,sam9x60ek
|
||||
- microchip,sam9x60-curiosity
|
||||
- const: microchip,sam9x60
|
||||
- const: atmel,at91sam9
|
||||
|
||||
|
|
|
|||
|
|
@ -51,6 +51,7 @@ dtb-$(CONFIG_SOC_AT91SAM9) += \
|
|||
at91sam9x25ek.dtb \
|
||||
at91sam9x35ek.dtb
|
||||
dtb-$(CONFIG_SOC_SAM9X60) += \
|
||||
at91-sam9x60_curiosity.dtb \
|
||||
at91-sam9x60ek.dtb
|
||||
dtb-$(CONFIG_SOC_SAM_V7) += \
|
||||
at91-kizbox2-2.dtb \
|
||||
|
|
|
|||
503
arch/arm/boot/dts/at91-sam9x60_curiosity.dts
Normal file
503
arch/arm/boot/dts/at91-sam9x60_curiosity.dts
Normal file
|
|
@ -0,0 +1,503 @@
|
|||
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||||
/*
|
||||
* at91-sam9x60_curiosity.dts - Device Tree file for Microchip SAM9X60 Curiosity board
|
||||
*
|
||||
* Copyright (C) 2022 Microchip Technology Inc. and its subsidiaries
|
||||
*
|
||||
* Author: Durai Manickam KR <durai.manickamkr@microchip.com>
|
||||
*/
|
||||
/dts-v1/;
|
||||
#include "sam9x60.dtsi"
|
||||
#include <dt-bindings/input/input.h>
|
||||
|
||||
/ {
|
||||
model = "Microchip SAM9X60 Curiosity";
|
||||
compatible = "microchip,sam9x60-curiosity", "microchip,sam9x60", "atmel,at91sam9";
|
||||
|
||||
aliases {
|
||||
i2c0 = &i2c0;
|
||||
i2c1 = &i2c6;
|
||||
serial2 = &uart7;
|
||||
};
|
||||
|
||||
chosen {
|
||||
stdout-path = "serial0:115200n8";
|
||||
};
|
||||
|
||||
memory@20000000 {
|
||||
reg = <0x20000000 0x8000000>;
|
||||
};
|
||||
|
||||
clocks {
|
||||
slow_xtal {
|
||||
clock-frequency = <32768>;
|
||||
};
|
||||
|
||||
main_xtal {
|
||||
clock-frequency = <24000000>;
|
||||
};
|
||||
};
|
||||
|
||||
gpio-keys {
|
||||
compatible = "gpio-keys";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_key_gpio_default>;
|
||||
|
||||
button-user {
|
||||
label = "PB_USER";
|
||||
gpios = <&pioA 29 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_PROG1>;
|
||||
wakeup-source;
|
||||
};
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_gpio_leds>;
|
||||
|
||||
led-red {
|
||||
label = "red";
|
||||
gpios = <&pioD 17 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
led-green {
|
||||
label = "green";
|
||||
gpios = <&pioD 19 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
led-blue {
|
||||
label = "blue";
|
||||
gpios = <&pioD 21 GPIO_ACTIVE_HIGH>;
|
||||
linux,default-trigger = "heartbeat";
|
||||
};
|
||||
};
|
||||
|
||||
|
||||
vdd_1v8: regulator-0 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-always-on;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-name = "VDD_1V8";
|
||||
};
|
||||
|
||||
vdd_1v15: regulator-1 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-always-on;
|
||||
regulator-max-microvolt = <1150000>;
|
||||
regulator-min-microvolt = <1150000>;
|
||||
regulator-name = "VDD_1V15";
|
||||
};
|
||||
|
||||
vdd1_3v3: regulator-2 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-always-on;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-name = "VDD1_3V3";
|
||||
};
|
||||
};
|
||||
|
||||
&adc {
|
||||
vddana-supply = <&vdd1_3v3>;
|
||||
vref-supply = <&vdd1_3v3>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_adc_default &pinctrl_adtrg_default>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&can0 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_can0_rx_tx>;
|
||||
status = "disabled"; /* Conflict with dbgu. */
|
||||
};
|
||||
|
||||
&can1 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_can1_rx_tx>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&dbgu {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_dbgu>;
|
||||
status = "okay"; /* Conflict with can0. */
|
||||
};
|
||||
|
||||
&ebi {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_ebi_addr_nand &pinctrl_ebi_data_lsb>;
|
||||
status = "okay";
|
||||
|
||||
nand_controller: nand-controller {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_nand_oe_we &pinctrl_nand_cs &pinctrl_nand_rb>;
|
||||
status = "okay";
|
||||
|
||||
nand@3 {
|
||||
reg = <0x3 0x0 0x800000>;
|
||||
rb-gpios = <&pioD 5 GPIO_ACTIVE_HIGH>;
|
||||
cs-gpios = <&pioD 4 GPIO_ACTIVE_HIGH>;
|
||||
nand-bus-width = <8>;
|
||||
nand-ecc-mode = "hw";
|
||||
nand-ecc-strength = <8>;
|
||||
nand-ecc-step-size = <512>;
|
||||
nand-on-flash-bbt;
|
||||
label = "atmel_nand";
|
||||
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
at91bootstrap@0 {
|
||||
label = "at91bootstrap";
|
||||
reg = <0x0 0x40000>;
|
||||
};
|
||||
|
||||
uboot@40000 {
|
||||
label = "u-boot";
|
||||
reg = <0x40000 0xc0000>;
|
||||
};
|
||||
|
||||
ubootenvred@100000 {
|
||||
label = "U-Boot Env Redundant";
|
||||
reg = <0x100000 0x40000>;
|
||||
};
|
||||
|
||||
ubootenv@140000 {
|
||||
label = "U-Boot Env";
|
||||
reg = <0x140000 0x40000>;
|
||||
};
|
||||
|
||||
dtb@180000 {
|
||||
label = "device tree";
|
||||
reg = <0x180000 0x80000>;
|
||||
};
|
||||
|
||||
kernel@200000 {
|
||||
label = "kernel";
|
||||
reg = <0x200000 0x600000>;
|
||||
};
|
||||
|
||||
rootfs@800000 {
|
||||
label = "rootfs";
|
||||
reg = <0x800000 0x1f800000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&flx0 {
|
||||
atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>;
|
||||
status = "okay";
|
||||
|
||||
i2c0: i2c@600 {
|
||||
dmas = <0>, <0>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_flx0_default>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
i2c-analog-filter;
|
||||
i2c-digital-filter;
|
||||
i2c-digital-filter-width-ns = <35>;
|
||||
status = "okay";
|
||||
|
||||
eeprom@53 {
|
||||
compatible = "atmel,24c02";
|
||||
reg = <0x53>;
|
||||
pagesize = <16>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&flx6 {
|
||||
atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>;
|
||||
status = "okay";
|
||||
|
||||
i2c6: i2c@600 {
|
||||
dmas = <0>, <0>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_flx6_default>;
|
||||
i2c-analog-filter;
|
||||
i2c-digital-filter;
|
||||
i2c-digital-filter-width-ns = <35>;
|
||||
status = "disabled";
|
||||
};
|
||||
};
|
||||
|
||||
&flx7 {
|
||||
atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>;
|
||||
status = "okay";
|
||||
|
||||
uart7: serial@200 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_flx7_default>;
|
||||
status = "okay";
|
||||
};
|
||||
};
|
||||
|
||||
&macb0 {
|
||||
phy-mode = "rmii";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_macb0_rmii>;
|
||||
status = "okay";
|
||||
|
||||
ethernet-phy@0 {
|
||||
reg = <0x0>;
|
||||
};
|
||||
};
|
||||
|
||||
&pinctrl {
|
||||
adc {
|
||||
pinctrl_adc_default: adc-default {
|
||||
atmel,pins = <AT91_PIOB 14 AT91_PERIPH_A AT91_PINCTRL_NONE>;
|
||||
};
|
||||
|
||||
pinctrl_adtrg_default: adtrg-default {
|
||||
atmel,pins = <AT91_PIOB 18 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>;
|
||||
};
|
||||
};
|
||||
|
||||
can0 {
|
||||
pinctrl_can0_rx_tx: can0-rx-tx {
|
||||
atmel,pins =
|
||||
<AT91_PIOA 9 AT91_PERIPH_B AT91_PINCTRL_NONE /* CANRX0 */
|
||||
AT91_PIOA 10 AT91_PERIPH_B AT91_PINCTRL_NONE /* CANTX0 */
|
||||
AT91_PIOC 9 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_DOWN>; /* Enable CAN Transceivers */
|
||||
};
|
||||
};
|
||||
|
||||
can1 {
|
||||
pinctrl_can1_rx_tx: can1-rx-tx {
|
||||
atmel,pins =
|
||||
<AT91_PIOA 6 AT91_PERIPH_B AT91_PINCTRL_NONE /* CANRX1 */
|
||||
AT91_PIOA 5 AT91_PERIPH_B AT91_PINCTRL_NONE /* CANTX1 */
|
||||
AT91_PIOB 17 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_DOWN>; /* Enable CAN Transceivers */
|
||||
};
|
||||
};
|
||||
|
||||
dbgu {
|
||||
pinctrl_dbgu: dbgu-0 {
|
||||
atmel,pins = <AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
|
||||
AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE>;
|
||||
};
|
||||
};
|
||||
|
||||
ebi {
|
||||
pinctrl_ebi_data_lsb: ebi-data-lsb {
|
||||
atmel,pins =
|
||||
<AT91_PIOD 6 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)
|
||||
AT91_PIOD 7 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)
|
||||
AT91_PIOD 8 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)
|
||||
AT91_PIOD 9 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)
|
||||
AT91_PIOD 10 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)
|
||||
AT91_PIOD 11 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)
|
||||
AT91_PIOD 12 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)
|
||||
AT91_PIOD 13 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)>;
|
||||
};
|
||||
|
||||
pinctrl_ebi_addr_nand: ebi-addr-nand {
|
||||
atmel,pins =
|
||||
<AT91_PIOD 2 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)
|
||||
AT91_PIOD 3 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)>;
|
||||
};
|
||||
};
|
||||
|
||||
flexcom {
|
||||
pinctrl_flx0_default: flx0-twi {
|
||||
atmel,pins =
|
||||
<AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
|
||||
AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
|
||||
};
|
||||
|
||||
pinctrl_flx6_default: flx6-twi {
|
||||
atmel,pins =
|
||||
<AT91_PIOA 30 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
|
||||
AT91_PIOA 31 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
|
||||
};
|
||||
|
||||
pinctrl_flx7_default: flx7-usart {
|
||||
atmel,pins =
|
||||
<AT91_PIOC 0 AT91_PERIPH_C AT91_PINCTRL_NONE
|
||||
AT91_PIOC 1 AT91_PERIPH_C AT91_PINCTRL_NONE>;
|
||||
};
|
||||
};
|
||||
|
||||
gpio-keys {
|
||||
pinctrl_key_gpio_default: pinctrl-key-gpio {
|
||||
atmel,pins = <AT91_PIOA 29 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
|
||||
};
|
||||
};
|
||||
|
||||
leds {
|
||||
pinctrl_gpio_leds: gpio-leds {
|
||||
atmel,pins = <AT91_PIOD 17 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
|
||||
AT91_PIOD 19 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
|
||||
AT91_PIOD 21 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
|
||||
};
|
||||
};
|
||||
|
||||
macb0 {
|
||||
pinctrl_macb0_rmii: macb0-rmii-0 {
|
||||
atmel,pins =
|
||||
<AT91_PIOB 0 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB0 periph A */
|
||||
AT91_PIOB 1 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB1 periph A */
|
||||
AT91_PIOB 2 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB2 periph A */
|
||||
AT91_PIOB 3 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB3 periph A */
|
||||
AT91_PIOB 4 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB4 periph A */
|
||||
AT91_PIOB 5 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB5 periph A */
|
||||
AT91_PIOB 6 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB6 periph A */
|
||||
AT91_PIOB 7 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB7 periph A */
|
||||
AT91_PIOB 9 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB9 periph A */
|
||||
AT91_PIOB 10 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB10 periph A */
|
||||
};
|
||||
};
|
||||
|
||||
nand {
|
||||
pinctrl_nand_oe_we: nand-oe-we-0 {
|
||||
atmel,pins =
|
||||
<AT91_PIOD 0 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)
|
||||
AT91_PIOD 1 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)>;
|
||||
};
|
||||
|
||||
pinctrl_nand_rb: nand-rb-0 {
|
||||
atmel,pins =
|
||||
<AT91_PIOD 5 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;
|
||||
};
|
||||
|
||||
pinctrl_nand_cs: nand-cs-0 {
|
||||
atmel,pins =
|
||||
<AT91_PIOD 4 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;
|
||||
};
|
||||
};
|
||||
|
||||
pwm0 {
|
||||
pinctrl_pwm0_0: pwm0-0 {
|
||||
atmel,pins = <AT91_PIOB 12 AT91_PERIPH_B AT91_PINCTRL_NONE>;
|
||||
};
|
||||
|
||||
pinctrl_pwm0_1: pwm0-1 {
|
||||
atmel,pins = <AT91_PIOB 13 AT91_PERIPH_B AT91_PINCTRL_NONE>;
|
||||
};
|
||||
|
||||
pinctrl_pwm0_2: pwm0-2 {
|
||||
atmel,pins = <AT91_PIOD 16 AT91_PERIPH_B AT91_PINCTRL_NONE>;
|
||||
};
|
||||
};
|
||||
|
||||
sdmmc0 {
|
||||
pinctrl_sdmmc0_default: sdmmc0 {
|
||||
atmel,pins =
|
||||
<AT91_PIOA 17 AT91_PERIPH_A (AT91_PINCTRL_DRIVE_STRENGTH_HI) /* PA17 CK periph A with pullup */
|
||||
AT91_PIOA 16 AT91_PERIPH_A (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI) /* PA16 CMD periph A with pullup */
|
||||
AT91_PIOA 15 AT91_PERIPH_A (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI) /* PA15 DAT0 periph A */
|
||||
AT91_PIOA 18 AT91_PERIPH_A (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI) /* PA18 DAT1 periph A with pullup */
|
||||
AT91_PIOA 19 AT91_PERIPH_A (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI) /* PA19 DAT2 periph A with pullup */
|
||||
AT91_PIOA 20 AT91_PERIPH_A (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI)>; /* PA20 DAT3 periph A with pullup */
|
||||
};
|
||||
|
||||
pinctrl_sdmmc0_cd: sdmmc0-cd {
|
||||
atmel,pins =
|
||||
<AT91_PIOA 25 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
|
||||
};
|
||||
};
|
||||
|
||||
sdmmc1 {
|
||||
pinctrl_sdmmc1_default: sdmmc1 {
|
||||
atmel,pins =
|
||||
<AT91_PIOA 13 AT91_PERIPH_B (AT91_PINCTRL_DRIVE_STRENGTH_HI) /* PA13 CK periph B */
|
||||
AT91_PIOA 12 AT91_PERIPH_B (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI) /* PA12 CMD periph B with pullup */
|
||||
AT91_PIOA 11 AT91_PERIPH_B (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI) /* PA11 DAT0 periph B with pullup */
|
||||
AT91_PIOA 2 AT91_PERIPH_B (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI) /* PA2 DAT1 periph B with pullup */
|
||||
AT91_PIOA 3 AT91_PERIPH_B (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI) /* PA3 DAT2 periph B with pullup */
|
||||
AT91_PIOA 4 AT91_PERIPH_B (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI)>; /* PA4 DAT3 periph B with pullup */
|
||||
};
|
||||
};
|
||||
|
||||
usb0 {
|
||||
pinctrl_usba_vbus: usba-vbus {
|
||||
atmel,pins = <AT91_PIOA 27 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
|
||||
};
|
||||
};
|
||||
|
||||
usb1 {
|
||||
pinctrl_usb_default: usb-default {
|
||||
atmel,pins = <AT91_PIOD 18 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
|
||||
AT91_PIOD 15 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
|
||||
};
|
||||
};
|
||||
}; /* pinctrl */
|
||||
|
||||
&pwm0 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_pwm0_0 &pinctrl_pwm0_1 &pinctrl_pwm0_2>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sdmmc0 {
|
||||
bus-width = <4>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_sdmmc0_default &pinctrl_sdmmc0_cd>;
|
||||
cd-gpios = <&pioA 25 GPIO_ACTIVE_LOW>;
|
||||
disable-wp;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sdmmc1 {
|
||||
bus-width = <4>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_sdmmc1_default>;
|
||||
disable-wp;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&shutdown_controller {
|
||||
debounce-delay-us = <976>;
|
||||
status = "okay";
|
||||
|
||||
input@0 {
|
||||
reg = <0>;
|
||||
};
|
||||
};
|
||||
|
||||
&tcb0 {
|
||||
timer0: timer@0 {
|
||||
compatible = "atmel,tcb-timer";
|
||||
reg = <0>;
|
||||
};
|
||||
|
||||
timer1: timer@1 {
|
||||
compatible = "atmel,tcb-timer";
|
||||
reg = <1>;
|
||||
};
|
||||
};
|
||||
|
||||
&usb0 {
|
||||
atmel,vbus-gpio = <&pioA 27 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_usba_vbus>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb1 {
|
||||
num-ports = <3>;
|
||||
atmel,vbus-gpio = <0
|
||||
&pioD 18 GPIO_ACTIVE_HIGH
|
||||
&pioD 15 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_usb_default>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb2 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&watchdog {
|
||||
status = "okay";
|
||||
};
|
||||
|
|
@ -16,8 +16,8 @@ / {
|
|||
|
||||
aliases {
|
||||
i2c0 = &i2c0;
|
||||
i2c1 = &i2c1;
|
||||
serial1 = &uart1;
|
||||
i2c1 = &i2c6;
|
||||
serial1 = &uart5;
|
||||
};
|
||||
|
||||
chosen {
|
||||
|
|
@ -207,15 +207,11 @@ &flx0 {
|
|||
status = "okay";
|
||||
|
||||
i2c0: i2c@600 {
|
||||
compatible = "microchip,sam9x60-i2c";
|
||||
reg = <0x600 0x200>;
|
||||
interrupts = <5 IRQ_TYPE_LEVEL_HIGH 7>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
clocks = <&pmc PMC_TYPE_PERIPHERAL 5>;
|
||||
dmas = <0>, <0>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_flx0_default>;
|
||||
atmel,fifo-size = <16>;
|
||||
i2c-analog-filter;
|
||||
i2c-digital-filter;
|
||||
i2c-digital-filter-width-ns = <35>;
|
||||
|
|
@ -234,17 +230,10 @@ &flx4 {
|
|||
atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_SPI>;
|
||||
status = "disabled";
|
||||
|
||||
spi0: spi@400 {
|
||||
compatible = "microchip,sam9x60-spi", "atmel,at91rm9200-spi";
|
||||
reg = <0x400 0x200>;
|
||||
interrupts = <13 IRQ_TYPE_LEVEL_HIGH 7>;
|
||||
clocks = <&pmc PMC_TYPE_PERIPHERAL 13>;
|
||||
clock-names = "spi_clk";
|
||||
spi4: spi@400 {
|
||||
dmas = <0>, <0>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_flx4_default>;
|
||||
atmel,fifo-size = <16>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
status = "disabled";
|
||||
};
|
||||
};
|
||||
|
|
@ -253,24 +242,9 @@ &flx5 {
|
|||
atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>;
|
||||
status = "okay";
|
||||
|
||||
uart1: serial@200 {
|
||||
compatible = "microchip,sam9x60-dbgu", "microchip,sam9x60-usart", "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
|
||||
reg = <0x200 0x200>;
|
||||
atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
|
||||
interrupts = <14 IRQ_TYPE_LEVEL_HIGH 7>;
|
||||
dmas = <&dma0
|
||||
(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
|
||||
AT91_XDMAC_DT_PERID(10))>,
|
||||
<&dma0
|
||||
(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
|
||||
AT91_XDMAC_DT_PERID(11))>;
|
||||
dma-names = "tx", "rx";
|
||||
clocks = <&pmc PMC_TYPE_PERIPHERAL 14>;
|
||||
clock-names = "usart";
|
||||
pinctrl-0 = <&pinctrl_flx5_default>;
|
||||
uart5: serial@200 {
|
||||
pinctrl-names = "default";
|
||||
atmel,use-dma-rx;
|
||||
atmel,use-dma-tx;
|
||||
pinctrl-0 = <&pinctrl_flx5_default>;
|
||||
status = "okay";
|
||||
};
|
||||
};
|
||||
|
|
@ -279,16 +253,12 @@ &flx6 {
|
|||
atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>;
|
||||
status = "okay";
|
||||
|
||||
i2c1: i2c@600 {
|
||||
compatible = "microchip,sam9x60-i2c";
|
||||
reg = <0x600 0x200>;
|
||||
interrupts = <9 IRQ_TYPE_LEVEL_HIGH 7>;
|
||||
i2c6: i2c@600 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
clocks = <&pmc PMC_TYPE_PERIPHERAL 9>;
|
||||
dmas = <0>, <0>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_flx6_default>;
|
||||
atmel,fifo-size = <16>;
|
||||
i2c-analog-filter;
|
||||
i2c-digital-filter;
|
||||
i2c-digital-filter-width-ns = <35>;
|
||||
|
|
@ -439,7 +409,7 @@ AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_NONE
|
|||
AT91_PIOA 14 AT91_PERIPH_A AT91_PINCTRL_NONE>;
|
||||
};
|
||||
|
||||
pinctrl_flx5_default: flx_uart {
|
||||
pinctrl_flx5_default: flx5_uart {
|
||||
atmel,pins =
|
||||
<AT91_PIOA 7 AT91_PERIPH_C AT91_PINCTRL_NONE
|
||||
AT91_PIOA 8 AT91_PERIPH_B AT91_PINCTRL_NONE
|
||||
|
|
|
|||
|
|
@ -170,6 +170,64 @@ flx4: flexcom@f0000000 {
|
|||
#size-cells = <1>;
|
||||
ranges = <0x0 0xf0000000 0x800>;
|
||||
status = "disabled";
|
||||
|
||||
uart4: serial@200 {
|
||||
compatible = "microchip,sam9x60-dbgu", "microchip,sam9x60-usart", "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
|
||||
reg = <0x200 0x200>;
|
||||
interrupts = <13 IRQ_TYPE_LEVEL_HIGH 7>;
|
||||
dmas = <&dma0
|
||||
(AT91_XDMAC_DT_MEM_IF(0) |
|
||||
AT91_XDMAC_DT_PER_IF(1) |
|
||||
AT91_XDMAC_DT_PERID(8))>,
|
||||
<&dma0
|
||||
(AT91_XDMAC_DT_MEM_IF(0) |
|
||||
AT91_XDMAC_DT_PER_IF(1) |
|
||||
AT91_XDMAC_DT_PERID(9))>;
|
||||
dma-names = "tx", "rx";
|
||||
clocks = <&pmc PMC_TYPE_PERIPHERAL 13>;
|
||||
clock-names = "usart";
|
||||
atmel,use-dma-rx;
|
||||
atmel,use-dma-tx;
|
||||
atmel,fifo-size = <16>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
spi4: spi@400 {
|
||||
compatible = "microchip,sam9x60-spi", "atmel,at91rm9200-spi";
|
||||
reg = <0x400 0x200>;
|
||||
interrupts = <13 IRQ_TYPE_LEVEL_HIGH 7>;
|
||||
clocks = <&pmc PMC_TYPE_PERIPHERAL 13>;
|
||||
clock-names = "spi_clk";
|
||||
dmas = <&dma0
|
||||
(AT91_XDMAC_DT_MEM_IF(0) |
|
||||
AT91_XDMAC_DT_PER_IF(1) |
|
||||
AT91_XDMAC_DT_PERID(8))>,
|
||||
<&dma0
|
||||
(AT91_XDMAC_DT_MEM_IF(0) |
|
||||
AT91_XDMAC_DT_PER_IF(1) |
|
||||
AT91_XDMAC_DT_PERID(9))>;
|
||||
dma-names = "tx", "rx";
|
||||
atmel,fifo-size = <16>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
i2c4: i2c@600 {
|
||||
compatible = "microchip,sam9x60-i2c";
|
||||
reg = <0x600 0x200>;
|
||||
interrupts = <13 IRQ_TYPE_LEVEL_HIGH 7>;
|
||||
clocks = <&pmc PMC_TYPE_PERIPHERAL 13>;
|
||||
dmas = <&dma0
|
||||
(AT91_XDMAC_DT_MEM_IF(0) |
|
||||
AT91_XDMAC_DT_PER_IF(1) |
|
||||
AT91_XDMAC_DT_PERID(8))>,
|
||||
<&dma0
|
||||
(AT91_XDMAC_DT_MEM_IF(0) |
|
||||
AT91_XDMAC_DT_PER_IF(1) |
|
||||
AT91_XDMAC_DT_PERID(9))>;
|
||||
dma-names = "tx", "rx";
|
||||
atmel,fifo-size = <16>;
|
||||
status = "disabled";
|
||||
};
|
||||
};
|
||||
|
||||
flx5: flexcom@f0004000 {
|
||||
|
|
@ -180,6 +238,65 @@ flx5: flexcom@f0004000 {
|
|||
#size-cells = <1>;
|
||||
ranges = <0x0 0xf0004000 0x800>;
|
||||
status = "disabled";
|
||||
|
||||
uart5: serial@200 {
|
||||
compatible = "microchip,sam9x60-dbgu", "microchip,sam9x60-usart", "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
|
||||
reg = <0x200 0x200>;
|
||||
atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
|
||||
interrupts = <14 IRQ_TYPE_LEVEL_HIGH 7>;
|
||||
dmas = <&dma0
|
||||
(AT91_XDMAC_DT_MEM_IF(0) |
|
||||
AT91_XDMAC_DT_PER_IF(1) |
|
||||
AT91_XDMAC_DT_PERID(10))>,
|
||||
<&dma0
|
||||
(AT91_XDMAC_DT_MEM_IF(0) |
|
||||
AT91_XDMAC_DT_PER_IF(1) |
|
||||
AT91_XDMAC_DT_PERID(11))>;
|
||||
dma-names = "tx", "rx";
|
||||
clocks = <&pmc PMC_TYPE_PERIPHERAL 14>;
|
||||
clock-names = "usart";
|
||||
atmel,use-dma-rx;
|
||||
atmel,use-dma-tx;
|
||||
atmel,fifo-size = <16>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
spi5: spi@400 {
|
||||
compatible = "microchip,sam9x60-spi", "atmel,at91rm9200-spi";
|
||||
reg = <0x400 0x200>;
|
||||
interrupts = <14 IRQ_TYPE_LEVEL_HIGH 7>;
|
||||
clocks = <&pmc PMC_TYPE_PERIPHERAL 14>;
|
||||
clock-names = "spi_clk";
|
||||
dmas = <&dma0
|
||||
(AT91_XDMAC_DT_MEM_IF(0) |
|
||||
AT91_XDMAC_DT_PER_IF(1) |
|
||||
AT91_XDMAC_DT_PERID(10))>,
|
||||
<&dma0
|
||||
(AT91_XDMAC_DT_MEM_IF(0) |
|
||||
AT91_XDMAC_DT_PER_IF(1) |
|
||||
AT91_XDMAC_DT_PERID(11))>;
|
||||
dma-names = "tx", "rx";
|
||||
atmel,fifo-size = <16>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
i2c5: i2c@600 {
|
||||
compatible = "microchip,sam9x60-i2c";
|
||||
reg = <0x600 0x200>;
|
||||
interrupts = <14 IRQ_TYPE_LEVEL_HIGH 7>;
|
||||
clocks = <&pmc PMC_TYPE_PERIPHERAL 14>;
|
||||
dmas = <&dma0
|
||||
(AT91_XDMAC_DT_MEM_IF(0) |
|
||||
AT91_XDMAC_DT_PER_IF(1) |
|
||||
AT91_XDMAC_DT_PERID(10))>,
|
||||
<&dma0
|
||||
(AT91_XDMAC_DT_MEM_IF(0) |
|
||||
AT91_XDMAC_DT_PER_IF(1) |
|
||||
AT91_XDMAC_DT_PERID(11))>;
|
||||
dma-names = "tx", "rx";
|
||||
atmel,fifo-size = <16>;
|
||||
status = "disabled";
|
||||
};
|
||||
};
|
||||
|
||||
dma0: dma-controller@f0008000 {
|
||||
|
|
@ -251,6 +368,45 @@ flx11: flexcom@f0020000 {
|
|||
#size-cells = <1>;
|
||||
ranges = <0x0 0xf0020000 0x800>;
|
||||
status = "disabled";
|
||||
|
||||
uart11: serial@200 {
|
||||
compatible = "microchip,sam9x60-dbgu", "microchip,sam9x60-usart", "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
|
||||
reg = <0x200 0x200>;
|
||||
interrupts = <32 IRQ_TYPE_LEVEL_HIGH 7>;
|
||||
dmas = <&dma0
|
||||
(AT91_XDMAC_DT_MEM_IF(0) |
|
||||
AT91_XDMAC_DT_PER_IF(1) |
|
||||
AT91_XDMAC_DT_PERID(22))>,
|
||||
<&dma0
|
||||
(AT91_XDMAC_DT_MEM_IF(0) |
|
||||
AT91_XDMAC_DT_PER_IF(1) |
|
||||
AT91_XDMAC_DT_PERID(23))>;
|
||||
dma-names = "tx", "rx";
|
||||
clocks = <&pmc PMC_TYPE_PERIPHERAL 32>;
|
||||
clock-names = "usart";
|
||||
atmel,use-dma-rx;
|
||||
atmel,use-dma-tx;
|
||||
atmel,fifo-size = <16>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
i2c11: i2c@600 {
|
||||
compatible = "microchip,sam9x60-i2c";
|
||||
reg = <0x600 0x200>;
|
||||
interrupts = <32 IRQ_TYPE_LEVEL_HIGH 7>;
|
||||
clocks = <&pmc PMC_TYPE_PERIPHERAL 32>;
|
||||
dmas = <&dma0
|
||||
(AT91_XDMAC_DT_MEM_IF(0) |
|
||||
AT91_XDMAC_DT_PER_IF(1) |
|
||||
AT91_XDMAC_DT_PERID(22))>,
|
||||
<&dma0
|
||||
(AT91_XDMAC_DT_MEM_IF(0) |
|
||||
AT91_XDMAC_DT_PER_IF(1) |
|
||||
AT91_XDMAC_DT_PERID(23))>;
|
||||
dma-names = "tx", "rx";
|
||||
atmel,fifo-size = <16>;
|
||||
status = "disabled";
|
||||
};
|
||||
};
|
||||
|
||||
flx12: flexcom@f0024000 {
|
||||
|
|
@ -261,6 +417,45 @@ flx12: flexcom@f0024000 {
|
|||
#size-cells = <1>;
|
||||
ranges = <0x0 0xf0024000 0x800>;
|
||||
status = "disabled";
|
||||
|
||||
uart12: serial@200 {
|
||||
compatible = "microchip,sam9x60-dbgu", "microchip,sam9x60-usart", "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
|
||||
reg = <0x200 0x200>;
|
||||
interrupts = <33 IRQ_TYPE_LEVEL_HIGH 7>;
|
||||
dmas = <&dma0
|
||||
(AT91_XDMAC_DT_MEM_IF(0) |
|
||||
AT91_XDMAC_DT_PER_IF(1) |
|
||||
AT91_XDMAC_DT_PERID(24))>,
|
||||
<&dma0
|
||||
(AT91_XDMAC_DT_MEM_IF(0) |
|
||||
AT91_XDMAC_DT_PER_IF(1) |
|
||||
AT91_XDMAC_DT_PERID(25))>;
|
||||
dma-names = "tx", "rx";
|
||||
clocks = <&pmc PMC_TYPE_PERIPHERAL 33>;
|
||||
clock-names = "usart";
|
||||
atmel,use-dma-rx;
|
||||
atmel,use-dma-tx;
|
||||
atmel,fifo-size = <16>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
i2c12: i2c@600 {
|
||||
compatible = "microchip,sam9x60-i2c";
|
||||
reg = <0x600 0x200>;
|
||||
interrupts = <33 IRQ_TYPE_LEVEL_HIGH 7>;
|
||||
clocks = <&pmc PMC_TYPE_PERIPHERAL 33>;
|
||||
dmas = <&dma0
|
||||
(AT91_XDMAC_DT_MEM_IF(0) |
|
||||
AT91_XDMAC_DT_PER_IF(1) |
|
||||
AT91_XDMAC_DT_PERID(24))>,
|
||||
<&dma0
|
||||
(AT91_XDMAC_DT_MEM_IF(0) |
|
||||
AT91_XDMAC_DT_PER_IF(1) |
|
||||
AT91_XDMAC_DT_PERID(25))>;
|
||||
dma-names = "tx", "rx";
|
||||
atmel,fifo-size = <16>;
|
||||
status = "disabled";
|
||||
};
|
||||
};
|
||||
|
||||
pit64b: timer@f0028000 {
|
||||
|
|
@ -379,6 +574,45 @@ flx6: flexcom@f8010000 {
|
|||
#size-cells = <1>;
|
||||
ranges = <0x0 0xf8010000 0x800>;
|
||||
status = "disabled";
|
||||
|
||||
uart6: serial@200 {
|
||||
compatible = "microchip,sam9x60-dbgu", "microchip,sam9x60-usart", "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
|
||||
reg = <0x200 0x200>;
|
||||
interrupts = <9 IRQ_TYPE_LEVEL_HIGH 7>;
|
||||
dmas = <&dma0
|
||||
(AT91_XDMAC_DT_MEM_IF(0) |
|
||||
AT91_XDMAC_DT_PER_IF(1) |
|
||||
AT91_XDMAC_DT_PERID(12))>,
|
||||
<&dma0
|
||||
(AT91_XDMAC_DT_MEM_IF(0) |
|
||||
AT91_XDMAC_DT_PER_IF(1) |
|
||||
AT91_XDMAC_DT_PERID(13))>;
|
||||
dma-names = "tx", "rx";
|
||||
clocks = <&pmc PMC_TYPE_PERIPHERAL 9>;
|
||||
clock-names = "usart";
|
||||
atmel,use-dma-rx;
|
||||
atmel,use-dma-tx;
|
||||
atmel,fifo-size = <16>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
i2c6: i2c@600 {
|
||||
compatible = "microchip,sam9x60-i2c";
|
||||
reg = <0x600 0x200>;
|
||||
interrupts = <9 IRQ_TYPE_LEVEL_HIGH 7>;
|
||||
clocks = <&pmc PMC_TYPE_PERIPHERAL 9>;
|
||||
dmas = <&dma0
|
||||
(AT91_XDMAC_DT_MEM_IF(0) |
|
||||
AT91_XDMAC_DT_PER_IF(1) |
|
||||
AT91_XDMAC_DT_PERID(12))>,
|
||||
<&dma0
|
||||
(AT91_XDMAC_DT_MEM_IF(0) |
|
||||
AT91_XDMAC_DT_PER_IF(1) |
|
||||
AT91_XDMAC_DT_PERID(13))>;
|
||||
dma-names = "tx", "rx";
|
||||
atmel,fifo-size = <16>;
|
||||
status = "disabled";
|
||||
};
|
||||
};
|
||||
|
||||
flx7: flexcom@f8014000 {
|
||||
|
|
@ -389,6 +623,45 @@ flx7: flexcom@f8014000 {
|
|||
#size-cells = <1>;
|
||||
ranges = <0x0 0xf8014000 0x800>;
|
||||
status = "disabled";
|
||||
|
||||
uart7: serial@200 {
|
||||
compatible = "microchip,sam9x60-dbgu", "microchip,sam9x60-usart", "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
|
||||
reg = <0x200 0x200>;
|
||||
interrupts = <10 IRQ_TYPE_LEVEL_HIGH 7>;
|
||||
dmas = <&dma0
|
||||
(AT91_XDMAC_DT_MEM_IF(0) |
|
||||
AT91_XDMAC_DT_PER_IF(1) |
|
||||
AT91_XDMAC_DT_PERID(14))>,
|
||||
<&dma0
|
||||
(AT91_XDMAC_DT_MEM_IF(0) |
|
||||
AT91_XDMAC_DT_PER_IF(1) |
|
||||
AT91_XDMAC_DT_PERID(15))>;
|
||||
dma-names = "tx", "rx";
|
||||
clocks = <&pmc PMC_TYPE_PERIPHERAL 10>;
|
||||
clock-names = "usart";
|
||||
atmel,use-dma-rx;
|
||||
atmel,use-dma-tx;
|
||||
atmel,fifo-size = <16>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
i2c7: i2c@600 {
|
||||
compatible = "microchip,sam9x60-i2c";
|
||||
reg = <0x600 0x200>;
|
||||
interrupts = <10 IRQ_TYPE_LEVEL_HIGH 7>;
|
||||
clocks = <&pmc PMC_TYPE_PERIPHERAL 10>;
|
||||
dmas = <&dma0
|
||||
(AT91_XDMAC_DT_MEM_IF(0) |
|
||||
AT91_XDMAC_DT_PER_IF(1) |
|
||||
AT91_XDMAC_DT_PERID(14))>,
|
||||
<&dma0
|
||||
(AT91_XDMAC_DT_MEM_IF(0) |
|
||||
AT91_XDMAC_DT_PER_IF(1) |
|
||||
AT91_XDMAC_DT_PERID(15))>;
|
||||
dma-names = "tx", "rx";
|
||||
atmel,fifo-size = <16>;
|
||||
status = "disabled";
|
||||
};
|
||||
};
|
||||
|
||||
flx8: flexcom@f8018000 {
|
||||
|
|
@ -399,6 +672,45 @@ flx8: flexcom@f8018000 {
|
|||
#size-cells = <1>;
|
||||
ranges = <0x0 0xf8018000 0x800>;
|
||||
status = "disabled";
|
||||
|
||||
uart8: serial@200 {
|
||||
compatible = "microchip,sam9x60-dbgu", "microchip,sam9x60-usart", "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
|
||||
reg = <0x200 0x200>;
|
||||
interrupts = <11 IRQ_TYPE_LEVEL_HIGH 7>;
|
||||
dmas = <&dma0
|
||||
(AT91_XDMAC_DT_MEM_IF(0) |
|
||||
AT91_XDMAC_DT_PER_IF(1) |
|
||||
AT91_XDMAC_DT_PERID(16))>,
|
||||
<&dma0
|
||||
(AT91_XDMAC_DT_MEM_IF(0) |
|
||||
AT91_XDMAC_DT_PER_IF(1) |
|
||||
AT91_XDMAC_DT_PERID(17))>;
|
||||
dma-names = "tx", "rx";
|
||||
clocks = <&pmc PMC_TYPE_PERIPHERAL 11>;
|
||||
clock-names = "usart";
|
||||
atmel,use-dma-rx;
|
||||
atmel,use-dma-tx;
|
||||
atmel,fifo-size = <16>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
i2c8: i2c@600 {
|
||||
compatible = "microchip,sam9x60-i2c";
|
||||
reg = <0x600 0x200>;
|
||||
interrupts = <11 IRQ_TYPE_LEVEL_HIGH 7>;
|
||||
clocks = <&pmc PMC_TYPE_PERIPHERAL 11>;
|
||||
dmas = <&dma0
|
||||
(AT91_XDMAC_DT_MEM_IF(0) |
|
||||
AT91_XDMAC_DT_PER_IF(1) |
|
||||
AT91_XDMAC_DT_PERID(16))>,
|
||||
<&dma0
|
||||
(AT91_XDMAC_DT_MEM_IF(0) |
|
||||
AT91_XDMAC_DT_PER_IF(1) |
|
||||
AT91_XDMAC_DT_PERID(17))>;
|
||||
dma-names = "tx", "rx";
|
||||
atmel,fifo-size = <16>;
|
||||
status = "disabled";
|
||||
};
|
||||
};
|
||||
|
||||
flx0: flexcom@f801c000 {
|
||||
|
|
@ -409,6 +721,64 @@ flx0: flexcom@f801c000 {
|
|||
#size-cells = <1>;
|
||||
ranges = <0x0 0xf801c000 0x800>;
|
||||
status = "disabled";
|
||||
|
||||
uart0: serial@200 {
|
||||
compatible = "microchip,sam9x60-dbgu", "microchip,sam9x60-usart", "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
|
||||
reg = <0x200 0x200>;
|
||||
interrupts = <5 IRQ_TYPE_LEVEL_HIGH 7>;
|
||||
dmas = <&dma0
|
||||
(AT91_XDMAC_DT_MEM_IF(0) |
|
||||
AT91_XDMAC_DT_PER_IF(1) |
|
||||
AT91_XDMAC_DT_PERID(0))>,
|
||||
<&dma0
|
||||
(AT91_XDMAC_DT_MEM_IF(0) |
|
||||
AT91_XDMAC_DT_PER_IF(1) |
|
||||
AT91_XDMAC_DT_PERID(1))>;
|
||||
dma-names = "tx", "rx";
|
||||
clocks = <&pmc PMC_TYPE_PERIPHERAL 5>;
|
||||
clock-names = "usart";
|
||||
atmel,use-dma-rx;
|
||||
atmel,use-dma-tx;
|
||||
atmel,fifo-size = <16>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
spi0: spi@400 {
|
||||
compatible = "microchip,sam9x60-spi", "atmel,at91rm9200-spi";
|
||||
reg = <0x400 0x200>;
|
||||
interrupts = <5 IRQ_TYPE_LEVEL_HIGH 7>;
|
||||
clocks = <&pmc PMC_TYPE_PERIPHERAL 5>;
|
||||
clock-names = "spi_clk";
|
||||
dmas = <&dma0
|
||||
(AT91_XDMAC_DT_MEM_IF(0) |
|
||||
AT91_XDMAC_DT_PER_IF(1) |
|
||||
AT91_XDMAC_DT_PERID(0))>,
|
||||
<&dma0
|
||||
(AT91_XDMAC_DT_MEM_IF(0) |
|
||||
AT91_XDMAC_DT_PER_IF(1) |
|
||||
AT91_XDMAC_DT_PERID(1))>;
|
||||
dma-names = "tx", "rx";
|
||||
atmel,fifo-size = <16>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
i2c0: i2c@600 {
|
||||
compatible = "microchip,sam9x60-i2c";
|
||||
reg = <0x600 0x200>;
|
||||
interrupts = <5 IRQ_TYPE_LEVEL_HIGH 7>;
|
||||
clocks = <&pmc PMC_TYPE_PERIPHERAL 5>;
|
||||
dmas = <&dma0
|
||||
(AT91_XDMAC_DT_MEM_IF(0) |
|
||||
AT91_XDMAC_DT_PER_IF(1) |
|
||||
AT91_XDMAC_DT_PERID(0))>,
|
||||
<&dma0
|
||||
(AT91_XDMAC_DT_MEM_IF(0) |
|
||||
AT91_XDMAC_DT_PER_IF(1) |
|
||||
AT91_XDMAC_DT_PERID(1))>;
|
||||
dma-names = "tx", "rx";
|
||||
atmel,fifo-size = <16>;
|
||||
status = "disabled";
|
||||
};
|
||||
};
|
||||
|
||||
flx1: flexcom@f8020000 {
|
||||
|
|
@ -419,6 +789,64 @@ flx1: flexcom@f8020000 {
|
|||
#size-cells = <1>;
|
||||
ranges = <0x0 0xf8020000 0x800>;
|
||||
status = "disabled";
|
||||
|
||||
uart1: serial@200 {
|
||||
compatible = "microchip,sam9x60-dbgu", "microchip,sam9x60-usart", "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
|
||||
reg = <0x200 0x200>;
|
||||
interrupts = <6 IRQ_TYPE_LEVEL_HIGH 7>;
|
||||
dmas = <&dma0
|
||||
(AT91_XDMAC_DT_MEM_IF(0) |
|
||||
AT91_XDMAC_DT_PER_IF(1) |
|
||||
AT91_XDMAC_DT_PERID(2))>,
|
||||
<&dma0
|
||||
(AT91_XDMAC_DT_MEM_IF(0) |
|
||||
AT91_XDMAC_DT_PER_IF(1) |
|
||||
AT91_XDMAC_DT_PERID(3))>;
|
||||
dma-names = "tx", "rx";
|
||||
clocks = <&pmc PMC_TYPE_PERIPHERAL 6>;
|
||||
clock-names = "usart";
|
||||
atmel,use-dma-rx;
|
||||
atmel,use-dma-tx;
|
||||
atmel,fifo-size = <16>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
spi1: spi@400 {
|
||||
compatible = "microchip,sam9x60-spi", "atmel,at91rm9200-spi";
|
||||
reg = <0x400 0x200>;
|
||||
interrupts = <6 IRQ_TYPE_LEVEL_HIGH 7>;
|
||||
clocks = <&pmc PMC_TYPE_PERIPHERAL 6>;
|
||||
clock-names = "spi_clk";
|
||||
dmas = <&dma0
|
||||
(AT91_XDMAC_DT_MEM_IF(0) |
|
||||
AT91_XDMAC_DT_PER_IF(1) |
|
||||
AT91_XDMAC_DT_PERID(2))>,
|
||||
<&dma0
|
||||
(AT91_XDMAC_DT_MEM_IF(0) |
|
||||
AT91_XDMAC_DT_PER_IF(1) |
|
||||
AT91_XDMAC_DT_PERID(3))>;
|
||||
dma-names = "tx", "rx";
|
||||
atmel,fifo-size = <16>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
i2c1: i2c@600 {
|
||||
compatible = "microchip,sam9x60-i2c";
|
||||
reg = <0x600 0x200>;
|
||||
interrupts = <6 IRQ_TYPE_LEVEL_HIGH 7>;
|
||||
clocks = <&pmc PMC_TYPE_PERIPHERAL 6>;
|
||||
dmas = <&dma0
|
||||
(AT91_XDMAC_DT_MEM_IF(0) |
|
||||
AT91_XDMAC_DT_PER_IF(1) |
|
||||
AT91_XDMAC_DT_PERID(2))>,
|
||||
<&dma0
|
||||
(AT91_XDMAC_DT_MEM_IF(0) |
|
||||
AT91_XDMAC_DT_PER_IF(1) |
|
||||
AT91_XDMAC_DT_PERID(3))>;
|
||||
dma-names = "tx", "rx";
|
||||
atmel,fifo-size = <16>;
|
||||
status = "disabled";
|
||||
};
|
||||
};
|
||||
|
||||
flx2: flexcom@f8024000 {
|
||||
|
|
@ -429,6 +857,64 @@ flx2: flexcom@f8024000 {
|
|||
#size-cells = <1>;
|
||||
ranges = <0x0 0xf8024000 0x800>;
|
||||
status = "disabled";
|
||||
|
||||
uart2: serial@200 {
|
||||
compatible = "microchip,sam9x60-dbgu", "microchip,sam9x60-usart", "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
|
||||
reg = <0x200 0x200>;
|
||||
interrupts = <7 IRQ_TYPE_LEVEL_HIGH 7>;
|
||||
dmas = <&dma0
|
||||
(AT91_XDMAC_DT_MEM_IF(0) |
|
||||
AT91_XDMAC_DT_PER_IF(1) |
|
||||
AT91_XDMAC_DT_PERID(4))>,
|
||||
<&dma0
|
||||
(AT91_XDMAC_DT_MEM_IF(0) |
|
||||
AT91_XDMAC_DT_PER_IF(1) |
|
||||
AT91_XDMAC_DT_PERID(5))>;
|
||||
dma-names = "tx", "rx";
|
||||
clocks = <&pmc PMC_TYPE_PERIPHERAL 7>;
|
||||
clock-names = "usart";
|
||||
atmel,use-dma-rx;
|
||||
atmel,use-dma-tx;
|
||||
atmel,fifo-size = <16>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
spi2: spi@400 {
|
||||
compatible = "microchip,sam9x60-spi", "atmel,at91rm9200-spi";
|
||||
reg = <0x400 0x200>;
|
||||
interrupts = <7 IRQ_TYPE_LEVEL_HIGH 7>;
|
||||
clocks = <&pmc PMC_TYPE_PERIPHERAL 7>;
|
||||
clock-names = "spi_clk";
|
||||
dmas = <&dma0
|
||||
(AT91_XDMAC_DT_MEM_IF(0) |
|
||||
AT91_XDMAC_DT_PER_IF(1) |
|
||||
AT91_XDMAC_DT_PERID(4))>,
|
||||
<&dma0
|
||||
(AT91_XDMAC_DT_MEM_IF(0) |
|
||||
AT91_XDMAC_DT_PER_IF(1) |
|
||||
AT91_XDMAC_DT_PERID(5))>;
|
||||
dma-names = "tx", "rx";
|
||||
atmel,fifo-size = <16>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
i2c2: i2c@600 {
|
||||
compatible = "microchip,sam9x60-i2c";
|
||||
reg = <0x600 0x200>;
|
||||
interrupts = <7 IRQ_TYPE_LEVEL_HIGH 7>;
|
||||
clocks = <&pmc PMC_TYPE_PERIPHERAL 7>;
|
||||
dmas = <&dma0
|
||||
(AT91_XDMAC_DT_MEM_IF(0) |
|
||||
AT91_XDMAC_DT_PER_IF(1) |
|
||||
AT91_XDMAC_DT_PERID(4))>,
|
||||
<&dma0
|
||||
(AT91_XDMAC_DT_MEM_IF(0) |
|
||||
AT91_XDMAC_DT_PER_IF(1) |
|
||||
AT91_XDMAC_DT_PERID(5))>;
|
||||
dma-names = "tx", "rx";
|
||||
atmel,fifo-size = <16>;
|
||||
status = "disabled";
|
||||
};
|
||||
};
|
||||
|
||||
flx3: flexcom@f8028000 {
|
||||
|
|
@ -439,6 +925,64 @@ flx3: flexcom@f8028000 {
|
|||
#size-cells = <1>;
|
||||
ranges = <0x0 0xf8028000 0x800>;
|
||||
status = "disabled";
|
||||
|
||||
uart3: serial@200 {
|
||||
compatible = "microchip,sam9x60-dbgu", "microchip,sam9x60-usart", "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
|
||||
reg = <0x200 0x200>;
|
||||
interrupts = <8 IRQ_TYPE_LEVEL_HIGH 7>;
|
||||
dmas = <&dma0
|
||||
(AT91_XDMAC_DT_MEM_IF(0) |
|
||||
AT91_XDMAC_DT_PER_IF(1) |
|
||||
AT91_XDMAC_DT_PERID(6))>,
|
||||
<&dma0
|
||||
(AT91_XDMAC_DT_MEM_IF(0) |
|
||||
AT91_XDMAC_DT_PER_IF(1) |
|
||||
AT91_XDMAC_DT_PERID(7))>;
|
||||
dma-names = "tx", "rx";
|
||||
clocks = <&pmc PMC_TYPE_PERIPHERAL 8>;
|
||||
clock-names = "usart";
|
||||
atmel,use-dma-rx;
|
||||
atmel,use-dma-tx;
|
||||
atmel,fifo-size = <16>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
spi3: spi@400 {
|
||||
compatible = "microchip,sam9x60-spi", "atmel,at91rm9200-spi";
|
||||
reg = <0x400 0x200>;
|
||||
interrupts = <8 IRQ_TYPE_LEVEL_HIGH 7>;
|
||||
clocks = <&pmc PMC_TYPE_PERIPHERAL 8>;
|
||||
clock-names = "spi_clk";
|
||||
dmas = <&dma0
|
||||
(AT91_XDMAC_DT_MEM_IF(0) |
|
||||
AT91_XDMAC_DT_PER_IF(1) |
|
||||
AT91_XDMAC_DT_PERID(6))>,
|
||||
<&dma0
|
||||
(AT91_XDMAC_DT_MEM_IF(0) |
|
||||
AT91_XDMAC_DT_PER_IF(1) |
|
||||
AT91_XDMAC_DT_PERID(7))>;
|
||||
dma-names = "tx", "rx";
|
||||
atmel,fifo-size = <16>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
i2c3: i2c@600 {
|
||||
compatible = "microchip,sam9x60-i2c";
|
||||
reg = <0x600 0x200>;
|
||||
interrupts = <8 IRQ_TYPE_LEVEL_HIGH 7>;
|
||||
clocks = <&pmc PMC_TYPE_PERIPHERAL 8>;
|
||||
dmas = <&dma0
|
||||
(AT91_XDMAC_DT_MEM_IF(0) |
|
||||
AT91_XDMAC_DT_PER_IF(1) |
|
||||
AT91_XDMAC_DT_PERID(6))>,
|
||||
<&dma0
|
||||
(AT91_XDMAC_DT_MEM_IF(0) |
|
||||
AT91_XDMAC_DT_PER_IF(1) |
|
||||
AT91_XDMAC_DT_PERID(7))>;
|
||||
dma-names = "tx", "rx";
|
||||
atmel,fifo-size = <16>;
|
||||
status = "disabled";
|
||||
};
|
||||
};
|
||||
|
||||
macb0: ethernet@f802c000 {
|
||||
|
|
@ -504,6 +1048,45 @@ flx9: flexcom@f8040000 {
|
|||
#size-cells = <1>;
|
||||
ranges = <0x0 0xf8040000 0x800>;
|
||||
status = "disabled";
|
||||
|
||||
uart9: serial@200 {
|
||||
compatible = "microchip,sam9x60-dbgu", "microchip,sam9x60-usart", "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
|
||||
reg = <0x200 0x200>;
|
||||
interrupts = <15 IRQ_TYPE_LEVEL_HIGH 7>;
|
||||
dmas = <&dma0
|
||||
(AT91_XDMAC_DT_MEM_IF(0) |
|
||||
AT91_XDMAC_DT_PER_IF(1) |
|
||||
AT91_XDMAC_DT_PERID(18))>,
|
||||
<&dma0
|
||||
(AT91_XDMAC_DT_MEM_IF(0) |
|
||||
AT91_XDMAC_DT_PER_IF(1) |
|
||||
AT91_XDMAC_DT_PERID(19))>;
|
||||
dma-names = "tx", "rx";
|
||||
clocks = <&pmc PMC_TYPE_PERIPHERAL 15>;
|
||||
clock-names = "usart";
|
||||
atmel,use-dma-rx;
|
||||
atmel,use-dma-tx;
|
||||
atmel,fifo-size = <16>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
i2c9: i2c@600 {
|
||||
compatible = "microchip,sam9x60-i2c";
|
||||
reg = <0x600 0x200>;
|
||||
interrupts = <15 IRQ_TYPE_LEVEL_HIGH 7>;
|
||||
clocks = <&pmc PMC_TYPE_PERIPHERAL 15>;
|
||||
dmas = <&dma0
|
||||
(AT91_XDMAC_DT_MEM_IF(0) |
|
||||
AT91_XDMAC_DT_PER_IF(1) |
|
||||
AT91_XDMAC_DT_PERID(18))>,
|
||||
<&dma0
|
||||
(AT91_XDMAC_DT_MEM_IF(0) |
|
||||
AT91_XDMAC_DT_PER_IF(1) |
|
||||
AT91_XDMAC_DT_PERID(19))>;
|
||||
dma-names = "tx", "rx";
|
||||
atmel,fifo-size = <16>;
|
||||
status = "disabled";
|
||||
};
|
||||
};
|
||||
|
||||
flx10: flexcom@f8044000 {
|
||||
|
|
@ -514,6 +1097,45 @@ flx10: flexcom@f8044000 {
|
|||
#size-cells = <1>;
|
||||
ranges = <0x0 0xf8044000 0x800>;
|
||||
status = "disabled";
|
||||
|
||||
uart10: serial@200 {
|
||||
compatible = "microchip,sam9x60-dbgu", "microchip,sam9x60-usart", "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
|
||||
reg = <0x200 0x200>;
|
||||
interrupts = <16 IRQ_TYPE_LEVEL_HIGH 7>;
|
||||
dmas = <&dma0
|
||||
(AT91_XDMAC_DT_MEM_IF(0) |
|
||||
AT91_XDMAC_DT_PER_IF(1) |
|
||||
AT91_XDMAC_DT_PERID(20))>,
|
||||
<&dma0
|
||||
(AT91_XDMAC_DT_MEM_IF(0) |
|
||||
AT91_XDMAC_DT_PER_IF(1) |
|
||||
AT91_XDMAC_DT_PERID(21))>;
|
||||
dma-names = "tx", "rx";
|
||||
clocks = <&pmc PMC_TYPE_PERIPHERAL 16>;
|
||||
clock-names = "usart";
|
||||
atmel,use-dma-rx;
|
||||
atmel,use-dma-tx;
|
||||
atmel,fifo-size = <16>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
i2c10: i2c@600 {
|
||||
compatible = "microchip,sam9x60-i2c";
|
||||
reg = <0x600 0x200>;
|
||||
interrupts = <16 IRQ_TYPE_LEVEL_HIGH 7>;
|
||||
clocks = <&pmc PMC_TYPE_PERIPHERAL 16>;
|
||||
dmas = <&dma0
|
||||
(AT91_XDMAC_DT_MEM_IF(0) |
|
||||
AT91_XDMAC_DT_PER_IF(1) |
|
||||
AT91_XDMAC_DT_PERID(20))>,
|
||||
<&dma0
|
||||
(AT91_XDMAC_DT_MEM_IF(0) |
|
||||
AT91_XDMAC_DT_PER_IF(1) |
|
||||
AT91_XDMAC_DT_PERID(21))>;
|
||||
dma-names = "tx", "rx";
|
||||
atmel,fifo-size = <16>;
|
||||
status = "disabled";
|
||||
};
|
||||
};
|
||||
|
||||
isi: isi@f8048000 {
|
||||
|
|
|
|||
Loading…
Reference in New Issue
Block a user