From af1352f82729d742506715176c15065a6b583167 Mon Sep 17 00:00:00 2001 From: Mathias Nyman Date: Thu, 10 Apr 2025 18:18:23 +0300 Subject: [PATCH 01/27] Revert "xhci: Avoid queuing redundant Stop Endpoint command for stalled endpoint" This reverts commit 0c74d232578b1a7071e0312312811cb75b26b202. Paul Menzel reported that the two EP_STALLED patches in 6.15-rc1 cause regression. Turns out that the new flag may never get cleared after reset-resume, preventing xhci from restarting the endpoint. Revert this to take a proper look at it. Link: https://lore.kernel.org/linux-usb/84b400f8-2943-44e0-8803-f3aac3b670af@molgen.mpg.de cc: Paul Menzel cc: Michal Pecio Signed-off-by: Mathias Nyman Link: https://lore.kernel.org/r/20250410151828.2868740-2-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/xhci.c | 8 +++----- 1 file changed, 3 insertions(+), 5 deletions(-) diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index 0452b8d65832..6370874bf265 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -1770,8 +1770,8 @@ static int xhci_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status) goto done; } - /* In these cases no commands are pending but the endpoint is stopped */ - if (ep->ep_state & (EP_CLEARING_TT | EP_STALLED)) { + /* In this case no commands are pending but the endpoint is stopped */ + if (ep->ep_state & EP_CLEARING_TT) { /* and cancelled TDs can be given back right away */ xhci_dbg(xhci, "Invalidating TDs instantly on slot %d ep %d in state 0x%x\n", urb->dev->slot_id, ep_index, ep->ep_state); @@ -3208,12 +3208,10 @@ static void xhci_endpoint_reset(struct usb_hcd *hcd, return; ep = &vdev->eps[ep_index]; - - spin_lock_irqsave(&xhci->lock, flags); - ep->ep_state &= ~EP_STALLED; /* Bail out if toggle is already being cleared by a endpoint reset */ + spin_lock_irqsave(&xhci->lock, flags); if (ep->ep_state & EP_HARD_CLEAR_TOGGLE) { ep->ep_state &= ~EP_HARD_CLEAR_TOGGLE; spin_unlock_irqrestore(&xhci->lock, flags); From b513cc1905bb360f48be281a1ded272131a8227a Mon Sep 17 00:00:00 2001 From: Mathias Nyman Date: Thu, 10 Apr 2025 18:18:24 +0300 Subject: [PATCH 02/27] Revert "xhci: Prevent early endpoint restart when handling STALL errors." This reverts commit 860f5d0d3594005d4588240028f42e8d2bfc725b. Paul Menzel reported that the two EP_STALLED patches in 6.15-rc1 cause regression. Turns out that the new flag may never get cleared after reset-resume, preventing xhci from restarting the endpoint. Revert this to take a proper look at it. Link: https://lore.kernel.org/linux-usb/84b400f8-2943-44e0-8803-f3aac3b670af@molgen.mpg.de cc: Paul Menzel cc: Michal Pecio Signed-off-by: Mathias Nyman Link: https://lore.kernel.org/r/20250410151828.2868740-3-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/xhci-ring.c | 7 ++----- drivers/usb/host/xhci.c | 6 ------ drivers/usb/host/xhci.h | 3 +-- 3 files changed, 3 insertions(+), 13 deletions(-) diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index 5d64c297721c..94a2ae2c52e2 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -561,8 +561,8 @@ void xhci_ring_ep_doorbell(struct xhci_hcd *xhci, * pointer command pending because the device can choose to start any * stream once the endpoint is on the HW schedule. */ - if (ep_state & (EP_STOP_CMD_PENDING | SET_DEQ_PENDING | EP_HALTED | - EP_CLEARING_TT | EP_STALLED)) + if ((ep_state & EP_STOP_CMD_PENDING) || (ep_state & SET_DEQ_PENDING) || + (ep_state & EP_HALTED) || (ep_state & EP_CLEARING_TT)) return; trace_xhci_ring_ep_doorbell(slot_id, DB_VALUE(ep_index, stream_id)); @@ -2573,9 +2573,6 @@ static void process_bulk_intr_td(struct xhci_hcd *xhci, struct xhci_virt_ep *ep, xhci_handle_halted_endpoint(xhci, ep, td, EP_SOFT_RESET); return; - case COMP_STALL_ERROR: - ep->ep_state |= EP_STALLED; - break; default: /* do nothing */ break; diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index 6370874bf265..ca390beda85b 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -1605,11 +1605,6 @@ static int xhci_urb_enqueue(struct usb_hcd *hcd, struct urb *urb, gfp_t mem_flag goto free_priv; } - /* Class driver might not be aware ep halted due to async URB giveback */ - if (*ep_state & EP_STALLED) - dev_dbg(&urb->dev->dev, "URB %p queued before clearing halt\n", - urb); - switch (usb_endpoint_type(&urb->ep->desc)) { case USB_ENDPOINT_XFER_CONTROL: @@ -3208,7 +3203,6 @@ static void xhci_endpoint_reset(struct usb_hcd *hcd, return; ep = &vdev->eps[ep_index]; - ep->ep_state &= ~EP_STALLED; /* Bail out if toggle is already being cleared by a endpoint reset */ spin_lock_irqsave(&xhci->lock, flags); diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h index 37860f1e3aba..28b6264f8b87 100644 --- a/drivers/usb/host/xhci.h +++ b/drivers/usb/host/xhci.h @@ -664,7 +664,7 @@ struct xhci_virt_ep { unsigned int err_count; unsigned int ep_state; #define SET_DEQ_PENDING (1 << 0) -#define EP_HALTED (1 << 1) /* Halted host ep handling */ +#define EP_HALTED (1 << 1) /* For stall handling */ #define EP_STOP_CMD_PENDING (1 << 2) /* For URB cancellation */ /* Transitioning the endpoint to using streams, don't enqueue URBs */ #define EP_GETTING_STREAMS (1 << 3) @@ -675,7 +675,6 @@ struct xhci_virt_ep { #define EP_SOFT_CLEAR_TOGGLE (1 << 7) /* usb_hub_clear_tt_buffer is in progress */ #define EP_CLEARING_TT (1 << 8) -#define EP_STALLED (1 << 9) /* For stall handling */ /* ---- Related to URB cancellation ---- */ struct list_head cancelled_td_list; struct xhci_hcd *xhci; From 9e3a28793d2fde7a709e814d2504652eaba6ae98 Mon Sep 17 00:00:00 2001 From: Michal Pecio Date: Thu, 10 Apr 2025 18:18:25 +0300 Subject: [PATCH 03/27] usb: xhci: Fix Short Packet handling rework ignoring errors A Short Packet event before the last TRB of a TD is followed by another event on the final TRB on spec-compliant HCs, which is most of them. A 'last_td_was_short' flag was added to know if a TD has just completed as Short Packet and another event is to come. The flag was cleared after seeing the event (unless no TDs are pending, but that's a separate bug) or seeing a new TD complete as something other than Short Packet. A rework replaced the flag with an 'old_trb_comp_code' variable. When an event doesn't match the pending TD and the previous event was Short Packet, the new event is silently ignored. To preserve old behavior, 'old_trb_comp_code' should be cleared at this point, but instead it is being set to current comp code, which is often Short Packet again. This can cause more events to be silently ignored, even though they are no longer connected with the old TD that completed short and indicate a serious problem with the driver or the xHC. Common device classes like UAC in async mode, UVC, serial or the UAS status pipe complete as Short Packet routinely and could be affected. Clear 'old_trb_comp_code' to zero, which is an invalid completion code and the same value the variable starts with. This restores original behavior on Short Packet and also works for illegal Etron events, which the code has been extended to cover too. Fixes: b331a3d8097f ("xhci: Handle spurious events on Etron host isoc enpoints") Signed-off-by: Michal Pecio Signed-off-by: Mathias Nyman Link: https://lore.kernel.org/r/20250410151828.2868740-4-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/xhci-ring.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index 94a2ae2c52e2..4e975caca235 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -2913,7 +2913,7 @@ static int handle_tx_event(struct xhci_hcd *xhci, if (xhci_spurious_success_tx_event(xhci, ep_ring)) { xhci_dbg(xhci, "Spurious event dma %pad, comp_code %u after %u\n", &ep_trb_dma, trb_comp_code, ep_ring->old_trb_comp_code); - ep_ring->old_trb_comp_code = trb_comp_code; + ep_ring->old_trb_comp_code = 0; return 0; } From 1ea050da5562af9b930d17cbbe9632d30f5df43a Mon Sep 17 00:00:00 2001 From: Michal Pecio Date: Thu, 10 Apr 2025 18:18:26 +0300 Subject: [PATCH 04/27] usb: xhci: Fix invalid pointer dereference in Etron workaround This check is performed before prepare_transfer() and prepare_ring(), so enqueue can already point at the final link TRB of a segment. And indeed it will, some 0.4% of times this code is called. Then enqueue + 1 is an invalid pointer. It will crash the kernel right away or load some junk which may look like a link TRB and cause the real link TRB to be replaced with a NOOP. This wouldn't end well. Use a functionally equivalent test which doesn't dereference the pointer and always gives correct result. Something has crashed my machine twice in recent days while playing with an Etron HC, and a control transfer stress test ran for confirmation has just crashed it again. The same test passes with this patch applied. Fixes: 5e1c67abc930 ("xhci: Fix control transfer error on Etron xHCI host") Cc: stable@vger.kernel.org Signed-off-by: Michal Pecio Signed-off-by: Mathias Nyman Reviewed-by: Kuangyi Chiang Link: https://lore.kernel.org/r/20250410151828.2868740-5-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/xhci-ring.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index 4e975caca235..b906bc2eea5f 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -3777,7 +3777,7 @@ int xhci_queue_ctrl_tx(struct xhci_hcd *xhci, gfp_t mem_flags, * enqueue a No Op TRB, this can prevent the Setup and Data Stage * TRB to be breaked by the Link TRB. */ - if (trb_is_link(ep_ring->enqueue + 1)) { + if (last_trb_on_seg(ep_ring->enq_seg, ep_ring->enqueue + 1)) { field = TRB_TYPE(TRB_TR_NOOP) | ep_ring->cycle_state; queue_trb(xhci, ep_ring, false, 0, 0, TRB_INTR_TARGET(0), field); From bea5892d0ed274e03655223d1977cf59f9aff2f2 Mon Sep 17 00:00:00 2001 From: Mathias Nyman Date: Thu, 10 Apr 2025 18:18:27 +0300 Subject: [PATCH 05/27] xhci: Limit time spent with xHC interrupts disabled during bus resume Current xhci bus resume implementation prevents xHC host from generating interrupts during high-speed USB 2 and super-speed USB 3 bus resume. Only reason to disable interrupts during bus resume would be to prevent the interrupt handler from interfering with the resume process of USB 2 ports. Host initiated resume of USB 2 ports is done in two stages. The xhci driver first transitions the port from 'U3' to 'Resume' state, then wait in Resume for 20ms, and finally moves port to U0 state. xhci driver can't prevent interrupts by keeping the xhci spinlock due to this 20ms sleep. Limit interrupt disabling to the USB 2 port resume case only. resuming USB 2 ports in bus resume is only done in special cases where USB 2 ports had to be forced to suspend during bus suspend. The current way of preventing interrupts by clearing the 'Interrupt Enable' (INTE) bit in USBCMD register won't prevent the Interrupter registers 'Interrupt Pending' (IP), 'Event Handler Busy' (EHB) and USBSTS register Event Interrupt (EINT) bits from being set. New interrupts can't be issued before those bits are properly clered. Disable interrupts by clearing the interrupter register 'Interrupt Enable' (IE) bit instead. This way IP, EHB and INTE won't be set before IE is enabled again and a new interrupt is triggered. Reported-by: Devyn Liu Closes: https://lore.kernel.org/linux-usb/b1a9e2d51b4d4ff7a304f77c5be8164e@huawei.com/ Cc: stable@vger.kernel.org Tested-by: Devyn Liu Signed-off-by: Mathias Nyman Link: https://lore.kernel.org/r/20250410151828.2868740-6-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/xhci-hub.c | 30 ++++++++++++++++-------------- drivers/usb/host/xhci.c | 4 ++-- drivers/usb/host/xhci.h | 2 ++ 3 files changed, 20 insertions(+), 16 deletions(-) diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c index c0f226584a40..486347776cb2 100644 --- a/drivers/usb/host/xhci-hub.c +++ b/drivers/usb/host/xhci-hub.c @@ -1878,9 +1878,10 @@ int xhci_bus_resume(struct usb_hcd *hcd) int max_ports, port_index; int sret; u32 next_state; - u32 temp, portsc; + u32 portsc; struct xhci_hub *rhub; struct xhci_port **ports; + bool disabled_irq = false; rhub = xhci_get_rhub(hcd); ports = rhub->ports; @@ -1896,17 +1897,20 @@ int xhci_bus_resume(struct usb_hcd *hcd) return -ESHUTDOWN; } - /* delay the irqs */ - temp = readl(&xhci->op_regs->command); - temp &= ~CMD_EIE; - writel(temp, &xhci->op_regs->command); - /* bus specific resume for ports we suspended at bus_suspend */ - if (hcd->speed >= HCD_USB3) + if (hcd->speed >= HCD_USB3) { next_state = XDEV_U0; - else + } else { next_state = XDEV_RESUME; - + if (bus_state->bus_suspended) { + /* + * prevent port event interrupts from interfering + * with usb2 port resume process + */ + xhci_disable_interrupter(xhci->interrupters[0]); + disabled_irq = true; + } + } port_index = max_ports; while (port_index--) { portsc = readl(ports[port_index]->addr); @@ -1974,11 +1978,9 @@ int xhci_bus_resume(struct usb_hcd *hcd) (void) readl(&xhci->op_regs->command); bus_state->next_statechange = jiffies + msecs_to_jiffies(5); - /* re-enable irqs */ - temp = readl(&xhci->op_regs->command); - temp |= CMD_EIE; - writel(temp, &xhci->op_regs->command); - temp = readl(&xhci->op_regs->command); + /* re-enable interrupter */ + if (disabled_irq) + xhci_enable_interrupter(xhci->interrupters[0]); spin_unlock_irqrestore(&xhci->lock, flags); return 0; diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index ca390beda85b..90eb491267b5 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -322,7 +322,7 @@ static void xhci_zero_64b_regs(struct xhci_hcd *xhci) xhci_info(xhci, "Fault detected\n"); } -static int xhci_enable_interrupter(struct xhci_interrupter *ir) +int xhci_enable_interrupter(struct xhci_interrupter *ir) { u32 iman; @@ -335,7 +335,7 @@ static int xhci_enable_interrupter(struct xhci_interrupter *ir) return 0; } -static int xhci_disable_interrupter(struct xhci_interrupter *ir) +int xhci_disable_interrupter(struct xhci_interrupter *ir) { u32 iman; diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h index 28b6264f8b87..242ab9fbc8ae 100644 --- a/drivers/usb/host/xhci.h +++ b/drivers/usb/host/xhci.h @@ -1890,6 +1890,8 @@ int xhci_alloc_tt_info(struct xhci_hcd *xhci, struct usb_tt *tt, gfp_t mem_flags); int xhci_set_interrupter_moderation(struct xhci_interrupter *ir, u32 imod_interval); +int xhci_enable_interrupter(struct xhci_interrupter *ir); +int xhci_disable_interrupter(struct xhci_interrupter *ir); /* xHCI ring, segment, TRB, and TD functions */ dma_addr_t xhci_trb_virt_to_dma(struct xhci_segment *seg, union xhci_trb *trb); From ec27386de23a511008c53aa2f3434ad180a3ca9a Mon Sep 17 00:00:00 2001 From: Andrei Kuchynski Date: Fri, 21 Mar 2025 14:37:26 +0000 Subject: [PATCH 06/27] usb: typec: class: Fix NULL pointer access Concurrent calls to typec_partner_unlink_device can lead to a NULL pointer dereference. This patch adds a mutex to protect USB device pointers and prevent this issue. The same mutex protects both the device pointers and the partner device registration. Cc: stable@vger.kernel.org Fixes: 59de2a56d127 ("usb: typec: Link enumerated USB devices with Type-C partner") Signed-off-by: Andrei Kuchynski Reviewed-by: Benson Leung Reviewed-by: Heikki Krogerus Link: https://lore.kernel.org/r/20250321143728.4092417-2-akuchynski@chromium.org Signed-off-by: Greg Kroah-Hartman --- drivers/usb/typec/class.c | 15 +++++++++++++-- drivers/usb/typec/class.h | 1 + 2 files changed, 14 insertions(+), 2 deletions(-) diff --git a/drivers/usb/typec/class.c b/drivers/usb/typec/class.c index 9c76c3d0c6cf..eadb150223f8 100644 --- a/drivers/usb/typec/class.c +++ b/drivers/usb/typec/class.c @@ -1052,6 +1052,7 @@ struct typec_partner *typec_register_partner(struct typec_port *port, partner->usb_mode = USB_MODE_USB3; } + mutex_lock(&port->partner_link_lock); ret = device_register(&partner->dev); if (ret) { dev_err(&port->dev, "failed to register partner (%d)\n", ret); @@ -1063,6 +1064,7 @@ struct typec_partner *typec_register_partner(struct typec_port *port, typec_partner_link_device(partner, port->usb2_dev); if (port->usb3_dev) typec_partner_link_device(partner, port->usb3_dev); + mutex_unlock(&port->partner_link_lock); return partner; } @@ -1083,12 +1085,14 @@ void typec_unregister_partner(struct typec_partner *partner) port = to_typec_port(partner->dev.parent); + mutex_lock(&port->partner_link_lock); if (port->usb2_dev) typec_partner_unlink_device(partner, port->usb2_dev); if (port->usb3_dev) typec_partner_unlink_device(partner, port->usb3_dev); device_unregister(&partner->dev); + mutex_unlock(&port->partner_link_lock); } EXPORT_SYMBOL_GPL(typec_unregister_partner); @@ -2041,10 +2045,11 @@ static struct typec_partner *typec_get_partner(struct typec_port *port) static void typec_partner_attach(struct typec_connector *con, struct device *dev) { struct typec_port *port = container_of(con, struct typec_port, con); - struct typec_partner *partner = typec_get_partner(port); + struct typec_partner *partner; struct usb_device *udev = to_usb_device(dev); enum usb_mode usb_mode; + mutex_lock(&port->partner_link_lock); if (udev->speed < USB_SPEED_SUPER) { usb_mode = USB_MODE_USB2; port->usb2_dev = dev; @@ -2053,18 +2058,22 @@ static void typec_partner_attach(struct typec_connector *con, struct device *dev port->usb3_dev = dev; } + partner = typec_get_partner(port); if (partner) { typec_partner_set_usb_mode(partner, usb_mode); typec_partner_link_device(partner, dev); put_device(&partner->dev); } + mutex_unlock(&port->partner_link_lock); } static void typec_partner_deattach(struct typec_connector *con, struct device *dev) { struct typec_port *port = container_of(con, struct typec_port, con); - struct typec_partner *partner = typec_get_partner(port); + struct typec_partner *partner; + mutex_lock(&port->partner_link_lock); + partner = typec_get_partner(port); if (partner) { typec_partner_unlink_device(partner, dev); put_device(&partner->dev); @@ -2074,6 +2083,7 @@ static void typec_partner_deattach(struct typec_connector *con, struct device *d port->usb2_dev = NULL; else if (port->usb3_dev == dev) port->usb3_dev = NULL; + mutex_unlock(&port->partner_link_lock); } /** @@ -2614,6 +2624,7 @@ struct typec_port *typec_register_port(struct device *parent, ida_init(&port->mode_ids); mutex_init(&port->port_type_lock); + mutex_init(&port->partner_link_lock); port->id = id; port->ops = cap->ops; diff --git a/drivers/usb/typec/class.h b/drivers/usb/typec/class.h index b3076a24ad2e..db2fe96c48ff 100644 --- a/drivers/usb/typec/class.h +++ b/drivers/usb/typec/class.h @@ -59,6 +59,7 @@ struct typec_port { enum typec_port_type port_type; enum usb_mode usb_mode; struct mutex port_type_lock; + struct mutex partner_link_lock; enum typec_orientation orientation; struct typec_switch *sw; From 66e1a887273c6b89f09bc11a40d0a71d5a081a8e Mon Sep 17 00:00:00 2001 From: Andrei Kuchynski Date: Fri, 21 Mar 2025 14:37:27 +0000 Subject: [PATCH 07/27] usb: typec: class: Invalidate USB device pointers on partner unregistration To avoid using invalid USB device pointers after a Type-C partner disconnects, this patch clears the pointers upon partner unregistration. This ensures a clean state for future connections. Cc: stable@vger.kernel.org Fixes: 59de2a56d127 ("usb: typec: Link enumerated USB devices with Type-C partner") Signed-off-by: Andrei Kuchynski Reviewed-by: Heikki Krogerus Reviewed-by: Benson Leung Link: https://lore.kernel.org/r/20250321143728.4092417-3-akuchynski@chromium.org Signed-off-by: Greg Kroah-Hartman --- drivers/usb/typec/class.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/drivers/usb/typec/class.c b/drivers/usb/typec/class.c index eadb150223f8..3df3e3736916 100644 --- a/drivers/usb/typec/class.c +++ b/drivers/usb/typec/class.c @@ -1086,10 +1086,14 @@ void typec_unregister_partner(struct typec_partner *partner) port = to_typec_port(partner->dev.parent); mutex_lock(&port->partner_link_lock); - if (port->usb2_dev) + if (port->usb2_dev) { typec_partner_unlink_device(partner, port->usb2_dev); - if (port->usb3_dev) + port->usb2_dev = NULL; + } + if (port->usb3_dev) { typec_partner_unlink_device(partner, port->usb3_dev); + port->usb3_dev = NULL; + } device_unregister(&partner->dev); mutex_unlock(&port->partner_link_lock); From 4e28f79e3dffa52d327b46d1a78dac16efb5810b Mon Sep 17 00:00:00 2001 From: Fedor Pchelkin Date: Sun, 16 Mar 2025 13:26:54 +0300 Subject: [PATCH 08/27] usb: chipidea: ci_hdrc_imx: fix usbmisc handling usbmisc is an optional device property so it is totally valid for the corresponding data->usbmisc_data to have a NULL value. Check that before dereferencing the pointer. Found by Linux Verification Center (linuxtesting.org) with Svace static analysis tool. Fixes: 74adad500346 ("usb: chipidea: ci_hdrc_imx: decrement device's refcount in .remove() and in the error path of .probe()") Cc: stable Signed-off-by: Fedor Pchelkin Acked-by: Peter Chen Link: https://lore.kernel.org/r/20250316102658.490340-2-pchelkin@ispras.ru Signed-off-by: Greg Kroah-Hartman --- drivers/usb/chipidea/ci_hdrc_imx.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/usb/chipidea/ci_hdrc_imx.c b/drivers/usb/chipidea/ci_hdrc_imx.c index 1a7fc638213e..619779eef333 100644 --- a/drivers/usb/chipidea/ci_hdrc_imx.c +++ b/drivers/usb/chipidea/ci_hdrc_imx.c @@ -534,7 +534,8 @@ static int ci_hdrc_imx_probe(struct platform_device *pdev) cpu_latency_qos_remove_request(&data->pm_qos_req); data->ci_pdev = NULL; err_put: - put_device(data->usbmisc_data->dev); + if (data->usbmisc_data) + put_device(data->usbmisc_data->dev); return ret; } @@ -559,7 +560,8 @@ static void ci_hdrc_imx_remove(struct platform_device *pdev) if (data->hsic_pad_regulator) regulator_disable(data->hsic_pad_regulator); } - put_device(data->usbmisc_data->dev); + if (data->usbmisc_data) + put_device(data->usbmisc_data->dev); } static void ci_hdrc_imx_shutdown(struct platform_device *pdev) From 8cab0e9a3f3e8d700179e0d6141643d54a267fd5 Mon Sep 17 00:00:00 2001 From: Fedor Pchelkin Date: Sun, 16 Mar 2025 13:26:55 +0300 Subject: [PATCH 09/27] usb: chipidea: ci_hdrc_imx: fix call balance of regulator routines Upon encountering errors during the HSIC pinctrl handling section the regulator should be disabled. Use devm_add_action_or_reset() to let the regulator-disabling routine be handled by device resource management stack. Found by Linux Verification Center (linuxtesting.org). Fixes: 4d6141288c33 ("usb: chipidea: imx: pinctrl for HSIC is optional") Cc: stable Signed-off-by: Fedor Pchelkin Acked-by: Peter Chen Link: https://lore.kernel.org/r/20250316102658.490340-3-pchelkin@ispras.ru Signed-off-by: Greg Kroah-Hartman --- drivers/usb/chipidea/ci_hdrc_imx.c | 25 +++++++++++++++++-------- 1 file changed, 17 insertions(+), 8 deletions(-) diff --git a/drivers/usb/chipidea/ci_hdrc_imx.c b/drivers/usb/chipidea/ci_hdrc_imx.c index 619779eef333..d942b3c72640 100644 --- a/drivers/usb/chipidea/ci_hdrc_imx.c +++ b/drivers/usb/chipidea/ci_hdrc_imx.c @@ -336,6 +336,13 @@ static int ci_hdrc_imx_notify_event(struct ci_hdrc *ci, unsigned int event) return ret; } +static void ci_hdrc_imx_disable_regulator(void *arg) +{ + struct ci_hdrc_imx_data *data = arg; + + regulator_disable(data->hsic_pad_regulator); +} + static int ci_hdrc_imx_probe(struct platform_device *pdev) { struct ci_hdrc_imx_data *data; @@ -394,6 +401,13 @@ static int ci_hdrc_imx_probe(struct platform_device *pdev) "Failed to enable HSIC pad regulator\n"); goto err_put; } + ret = devm_add_action_or_reset(dev, + ci_hdrc_imx_disable_regulator, data); + if (ret) { + dev_err(dev, + "Failed to add regulator devm action\n"); + goto err_put; + } } } @@ -432,11 +446,11 @@ static int ci_hdrc_imx_probe(struct platform_device *pdev) ret = imx_get_clks(dev); if (ret) - goto disable_hsic_regulator; + goto qos_remove_request; ret = imx_prepare_enable_clks(dev); if (ret) - goto disable_hsic_regulator; + goto qos_remove_request; ret = clk_prepare_enable(data->clk_wakeup); if (ret) @@ -526,10 +540,7 @@ static int ci_hdrc_imx_probe(struct platform_device *pdev) clk_disable_unprepare(data->clk_wakeup); err_wakeup_clk: imx_disable_unprepare_clks(dev); -disable_hsic_regulator: - if (data->hsic_pad_regulator) - /* don't overwrite original ret (cf. EPROBE_DEFER) */ - regulator_disable(data->hsic_pad_regulator); +qos_remove_request: if (pdata.flags & CI_HDRC_PMQOS) cpu_latency_qos_remove_request(&data->pm_qos_req); data->ci_pdev = NULL; @@ -557,8 +568,6 @@ static void ci_hdrc_imx_remove(struct platform_device *pdev) clk_disable_unprepare(data->clk_wakeup); if (data->plat_data->flags & CI_HDRC_PMQOS) cpu_latency_qos_remove_request(&data->pm_qos_req); - if (data->hsic_pad_regulator) - regulator_disable(data->hsic_pad_regulator); } if (data->usbmisc_data) put_device(data->usbmisc_data->dev); From 8c531e0a8c2d82509ad97c6d3a1e6217c7ed136d Mon Sep 17 00:00:00 2001 From: Fedor Pchelkin Date: Sun, 16 Mar 2025 13:26:56 +0300 Subject: [PATCH 10/27] usb: chipidea: ci_hdrc_imx: implement usb_phy_init() error handling usb_phy_init() may return an error code if e.g. its implementation fails to prepare/enable some clocks. And properly rollback on probe error path by calling the counterpart usb_phy_shutdown(). Found by Linux Verification Center (linuxtesting.org). Fixes: be9cae2479f4 ("usb: chipidea: imx: Fix ULPI on imx53") Cc: stable Signed-off-by: Fedor Pchelkin Acked-by: Peter Chen Link: https://lore.kernel.org/r/20250316102658.490340-4-pchelkin@ispras.ru Signed-off-by: Greg Kroah-Hartman --- drivers/usb/chipidea/ci_hdrc_imx.c | 13 ++++++++++--- 1 file changed, 10 insertions(+), 3 deletions(-) diff --git a/drivers/usb/chipidea/ci_hdrc_imx.c b/drivers/usb/chipidea/ci_hdrc_imx.c index d942b3c72640..4f8bfd242b59 100644 --- a/drivers/usb/chipidea/ci_hdrc_imx.c +++ b/drivers/usb/chipidea/ci_hdrc_imx.c @@ -484,7 +484,11 @@ static int ci_hdrc_imx_probe(struct platform_device *pdev) of_usb_get_phy_mode(np) == USBPHY_INTERFACE_MODE_ULPI) { pdata.flags |= CI_HDRC_OVERRIDE_PHY_CONTROL; data->override_phy_control = true; - usb_phy_init(pdata.usb_phy); + ret = usb_phy_init(pdata.usb_phy); + if (ret) { + dev_err(dev, "Failed to init phy\n"); + goto err_clk; + } } if (pdata.flags & CI_HDRC_SUPPORTS_RUNTIME_PM) @@ -493,7 +497,7 @@ static int ci_hdrc_imx_probe(struct platform_device *pdev) ret = imx_usbmisc_init(data->usbmisc_data); if (ret) { dev_err(dev, "usbmisc init failed, ret=%d\n", ret); - goto err_clk; + goto phy_shutdown; } data->ci_pdev = ci_hdrc_add_device(dev, @@ -502,7 +506,7 @@ static int ci_hdrc_imx_probe(struct platform_device *pdev) if (IS_ERR(data->ci_pdev)) { ret = PTR_ERR(data->ci_pdev); dev_err_probe(dev, ret, "ci_hdrc_add_device failed\n"); - goto err_clk; + goto phy_shutdown; } if (data->usbmisc_data) { @@ -536,6 +540,9 @@ static int ci_hdrc_imx_probe(struct platform_device *pdev) disable_device: ci_hdrc_remove_device(data->ci_pdev); +phy_shutdown: + if (data->override_phy_control) + usb_phy_shutdown(data->phy); err_clk: clk_disable_unprepare(data->clk_wakeup); err_wakeup_clk: From a1059896f2bfdcebcdc7153c3be2307ea319501f Mon Sep 17 00:00:00 2001 From: Ralph Siemsen Date: Tue, 18 Mar 2025 11:09:32 -0400 Subject: [PATCH 11/27] usb: cdns3: Fix deadlock when using NCM gadget The cdns3 driver has the same NCM deadlock as fixed in cdnsp by commit 58f2fcb3a845 ("usb: cdnsp: Fix deadlock issue during using NCM gadget"). Under PREEMPT_RT the deadlock can be readily triggered by heavy network traffic, for example using "iperf --bidir" over NCM ethernet link. The deadlock occurs because the threaded interrupt handler gets preempted by a softirq, but both are protected by the same spinlock. Prevent deadlock by disabling softirq during threaded irq handler. Cc: stable Fixes: 7733f6c32e36 ("usb: cdns3: Add Cadence USB3 DRD Driver") Signed-off-by: Ralph Siemsen Acked-by: Peter Chen Reviewed-by: Sebastian Andrzej Siewior Link: https://lore.kernel.org/r/20250318-rfs-cdns3-deadlock-v2-1-bfd9cfcee732@linaro.org Signed-off-by: Greg Kroah-Hartman --- drivers/usb/cdns3/cdns3-gadget.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/usb/cdns3/cdns3-gadget.c b/drivers/usb/cdns3/cdns3-gadget.c index 694aa1457739..d9d8dc05b235 100644 --- a/drivers/usb/cdns3/cdns3-gadget.c +++ b/drivers/usb/cdns3/cdns3-gadget.c @@ -1963,6 +1963,7 @@ static irqreturn_t cdns3_device_thread_irq_handler(int irq, void *data) unsigned int bit; unsigned long reg; + local_bh_disable(); spin_lock_irqsave(&priv_dev->lock, flags); reg = readl(&priv_dev->regs->usb_ists); @@ -2004,6 +2005,7 @@ static irqreturn_t cdns3_device_thread_irq_handler(int irq, void *data) irqend: writel(~0, &priv_dev->regs->ep_ien); spin_unlock_irqrestore(&priv_dev->lock, flags); + local_bh_enable(); return ret; } From 38d6e60b6f3a99f8f13bee22eab616136c2c0675 Mon Sep 17 00:00:00 2001 From: Mike Looijmans Date: Tue, 18 Mar 2025 07:44:52 +0100 Subject: [PATCH 12/27] usb: dwc3: xilinx: Prevent spike in reset signal The "reset" GPIO controls the RESET signal to an external, usually ULPI PHY, chip. The original code path acquires the signal in LOW state, and then immediately asserts it HIGH again, if the reset signal defaulted to asserted, there'd be a short "spike" before the reset. Here is what happens depending on the pre-existing state of the reset signal: Reset (previously asserted): ~~~|_|~~~~|_______ Reset (previously deasserted): _____|~~~~|_______ ^ ^ ^ A B C At point A, the low going transition is because the reset line is requested using GPIOD_OUT_LOW. If the line is successfully requested, the first thing we do is set it high _without_ any delay. This is point B. So, a glitch occurs between A and B. Requesting the line using GPIOD_OUT_HIGH eliminates the A and B transitions. Instead we get: Reset (previously asserted) : ~~~~~~~~~~|______ Reset (previously deasserted): ____|~~~~~|______ ^ ^ A C Where A and C are the points described above in the code. Point B has been eliminated. The issue was found during code inspection. Also remove the cryptic "toggle ulpi .." comment. Fixes: ca05b38252d7 ("usb: dwc3: xilinx: Add gpio-reset support") Cc: stable Signed-off-by: Mike Looijmans Reviewed-by: Radhey Shyam Pandey Acked-by: Thinh Nguyen Link: https://lore.kernel.org/r/20250318064518.9320-1-mike.looijmans@topic.nl Signed-off-by: Greg Kroah-Hartman --- drivers/usb/dwc3/dwc3-xilinx.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/drivers/usb/dwc3/dwc3-xilinx.c b/drivers/usb/dwc3/dwc3-xilinx.c index a33a42ba0249..4ca7f6240d07 100644 --- a/drivers/usb/dwc3/dwc3-xilinx.c +++ b/drivers/usb/dwc3/dwc3-xilinx.c @@ -207,15 +207,13 @@ static int dwc3_xlnx_init_zynqmp(struct dwc3_xlnx *priv_data) skip_usb3_phy: /* ulpi reset via gpio-modepin or gpio-framework driver */ - reset_gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW); + reset_gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_HIGH); if (IS_ERR(reset_gpio)) { return dev_err_probe(dev, PTR_ERR(reset_gpio), "Failed to request reset GPIO\n"); } if (reset_gpio) { - /* Toggle ulpi to reset the phy. */ - gpiod_set_value_cansleep(reset_gpio, 1); usleep_range(5000, 10000); gpiod_set_value_cansleep(reset_gpio, 0); usleep_range(5000, 10000); From bcb60d438547355b8f9ad48645909139b64d3482 Mon Sep 17 00:00:00 2001 From: Huacai Chen Date: Fri, 28 Mar 2025 12:00:59 +0800 Subject: [PATCH 13/27] USB: OHCI: Add quirk for LS7A OHCI controller (rev 0x02) The OHCI controller (rev 0x02) under LS7A PCI host has a hardware flaw. MMIO register with offset 0x60/0x64 is treated as legacy PS2-compatible keyboard/mouse interface, which confuse the OHCI controller. Since OHCI only use a 4KB BAR resource indeed, the LS7A OHCI controller's 32KB BAR is wrapped around (the second 4KB BAR space is the same as the first 4KB internally). So we can add an 4KB offset (0x1000) to the OHCI registers (from the PCI BAR resource) as a quirk. Cc: stable Suggested-by: Bjorn Helgaas Reviewed-by: Alan Stern Tested-by: Mingcong Bai Signed-off-by: Huacai Chen Link: https://lore.kernel.org/r/20250328040059.3672979-1-chenhuacai@loongson.cn Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/ohci-pci.c | 23 +++++++++++++++++++++++ 1 file changed, 23 insertions(+) diff --git a/drivers/usb/host/ohci-pci.c b/drivers/usb/host/ohci-pci.c index 900ea0d368e0..9f0a6b27e47c 100644 --- a/drivers/usb/host/ohci-pci.c +++ b/drivers/usb/host/ohci-pci.c @@ -165,6 +165,25 @@ static int ohci_quirk_amd700(struct usb_hcd *hcd) return 0; } +static int ohci_quirk_loongson(struct usb_hcd *hcd) +{ + struct pci_dev *pdev = to_pci_dev(hcd->self.controller); + + /* + * Loongson's LS7A OHCI controller (rev 0x02) has a + * flaw. MMIO register with offset 0x60/64 is treated + * as legacy PS2-compatible keyboard/mouse interface. + * Since OHCI only use 4KB BAR resource, LS7A OHCI's + * 32KB BAR is wrapped around (the 2nd 4KB BAR space + * is the same as the 1st 4KB internally). So add 4KB + * offset (0x1000) to the OHCI registers as a quirk. + */ + if (pdev->revision == 0x2) + hcd->regs += SZ_4K; /* SZ_4K = 0x1000 */ + + return 0; +} + static int ohci_quirk_qemu(struct usb_hcd *hcd) { struct ohci_hcd *ohci = hcd_to_ohci(hcd); @@ -224,6 +243,10 @@ static const struct pci_device_id ohci_pci_quirks[] = { PCI_DEVICE(PCI_VENDOR_ID_ATI, 0x4399), .driver_data = (unsigned long)ohci_quirk_amd700, }, + { + PCI_DEVICE(PCI_VENDOR_ID_LOONGSON, 0x7a24), + .driver_data = (unsigned long)ohci_quirk_loongson, + }, { .vendor = PCI_VENDOR_ID_APPLE, .device = 0x003f, From 2932b6b547ec36ad2ed60fbf2117c0e46bb7d40a Mon Sep 17 00:00:00 2001 From: Miao Li Date: Tue, 1 Apr 2025 10:30:27 +0800 Subject: [PATCH 14/27] usb: quirks: add DELAY_INIT quirk for Silicon Motion Flash Drive Silicon Motion Flash Drive connects to Huawei hisi platforms and performs a system reboot test for two thousand circles, it will randomly work incorrectly on boot, set DELAY_INIT quirk can workaround this issue. Signed-off-by: Miao Li Cc: stable Link: https://lore.kernel.org/r/20250401023027.44894-1-limiao870622@163.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/quirks.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c index 8efbacc5bc34..61583a1b7ac6 100644 --- a/drivers/usb/core/quirks.c +++ b/drivers/usb/core/quirks.c @@ -383,6 +383,9 @@ static const struct usb_device_id usb_quirk_list[] = { { USB_DEVICE(0x0904, 0x6103), .driver_info = USB_QUIRK_LINEAR_FRAME_INTR_BINTERVAL }, + /* Silicon Motion Flash Drive */ + { USB_DEVICE(0x090c, 0x1000), .driver_info = USB_QUIRK_DELAY_INIT }, + /* Sound Devices USBPre2 */ { USB_DEVICE(0x0926, 0x0202), .driver_info = USB_QUIRK_ENDPOINT_IGNORE }, From 9ab75eee1a056f896b87d139044dd103adc532b9 Mon Sep 17 00:00:00 2001 From: Oliver Neukum Date: Thu, 3 Apr 2025 19:59:45 +0200 Subject: [PATCH 15/27] USB: storage: quirk for ADATA Portable HDD CH94 Version 1.60 specifically needs this quirk. Version 2.00 is known good. Cc: stable Signed-off-by: Oliver Neukum Link: https://lore.kernel.org/r/20250403180004.343133-1-oneukum@suse.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/storage/unusual_uas.h | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/usb/storage/unusual_uas.h b/drivers/usb/storage/unusual_uas.h index 1f8c9b16a0fb..d460d71b4257 100644 --- a/drivers/usb/storage/unusual_uas.h +++ b/drivers/usb/storage/unusual_uas.h @@ -83,6 +83,13 @@ UNUSUAL_DEV(0x0bc2, 0x331a, 0x0000, 0x9999, USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_NO_REPORT_LUNS), +/* Reported-by: Oliver Neukum */ +UNUSUAL_DEV(0x125f, 0xa94a, 0x0160, 0x0160, + "ADATA", + "Portable HDD CH94", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_NO_ATA_1X), + /* Reported-by: Benjamin Tissoires */ UNUSUAL_DEV(0x13fd, 0x3940, 0x0000, 0x9999, "Initio Corporation", From 63ccd26cd1f6600421795f6ca3e625076be06c9f Mon Sep 17 00:00:00 2001 From: Frode Isaksen Date: Thu, 3 Apr 2025 09:28:03 +0200 Subject: [PATCH 16/27] usb: dwc3: gadget: check that event count does not exceed event buffer length The event count is read from register DWC3_GEVNTCOUNT. There is a check for the count being zero, but not for exceeding the event buffer length. Check that event count does not exceed event buffer length, avoiding an out-of-bounds access when memcpy'ing the event. Crash log: Unable to handle kernel paging request at virtual address ffffffc0129be000 pc : __memcpy+0x114/0x180 lr : dwc3_check_event_buf+0xec/0x348 x3 : 0000000000000030 x2 : 000000000000dfc4 x1 : ffffffc0129be000 x0 : ffffff87aad60080 Call trace: __memcpy+0x114/0x180 dwc3_interrupt+0x24/0x34 Signed-off-by: Frode Isaksen Fixes: 72246da40f37 ("usb: Introduce DesignWare USB3 DRD Driver") Cc: stable Acked-by: Thinh Nguyen Link: https://lore.kernel.org/r/20250403072907.448524-1-fisaksen@baylibre.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/dwc3/gadget.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c index 47e73c4ed62d..8c30d86cc4e3 100644 --- a/drivers/usb/dwc3/gadget.c +++ b/drivers/usb/dwc3/gadget.c @@ -4617,6 +4617,12 @@ static irqreturn_t dwc3_check_event_buf(struct dwc3_event_buffer *evt) if (!count) return IRQ_NONE; + if (count > evt->length) { + dev_err_ratelimited(dwc->dev, "invalid count(%u) > evt->length(%u)\n", + count, evt->length); + return IRQ_NONE; + } + evt->count = count; evt->flags |= DWC3_EVENT_PENDING; From e00b39a4f3552c730f1e24c8d62c4a8c6aad4e5d Mon Sep 17 00:00:00 2001 From: Oliver Neukum Date: Tue, 8 Apr 2025 15:57:46 +0200 Subject: [PATCH 17/27] USB: VLI disk crashes if LPM is used This device needs the NO_LPM quirk. Cc: stable Signed-off-by: Oliver Neukum Link: https://lore.kernel.org/r/20250408135800.792515-1-oneukum@suse.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/quirks.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c index 61583a1b7ac6..87b48c176160 100644 --- a/drivers/usb/core/quirks.c +++ b/drivers/usb/core/quirks.c @@ -542,6 +542,9 @@ static const struct usb_device_id usb_quirk_list[] = { { USB_DEVICE(0x2040, 0x7200), .driver_info = USB_QUIRK_CONFIG_INTF_STRINGS }, + /* VLI disk */ + { USB_DEVICE(0x2109, 0x0711), .driver_info = USB_QUIRK_NO_LPM }, + /* Raydium Touchscreen */ { USB_DEVICE(0x2386, 0x3114), .driver_info = USB_QUIRK_NO_LPM }, From 9697f5efcf5fdea65b8390b5eb81bebe746ceedc Mon Sep 17 00:00:00 2001 From: Oliver Neukum Date: Tue, 1 Apr 2025 10:45:38 +0200 Subject: [PATCH 18/27] USB: wdm: handle IO errors in wdm_wwan_port_start In case submitting the URB fails we must undo what we've done so far. Fixes: cac6fb015f71 ("usb: class: cdc-wdm: WWAN framework integration") Cc: stable Signed-off-by: Oliver Neukum Link: https://lore.kernel.org/r/20250401084749.175246-2-oneukum@suse.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/class/cdc-wdm.c | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-) diff --git a/drivers/usb/class/cdc-wdm.c b/drivers/usb/class/cdc-wdm.c index 86ee39db013f..eb86d1c9b4a4 100644 --- a/drivers/usb/class/cdc-wdm.c +++ b/drivers/usb/class/cdc-wdm.c @@ -829,6 +829,7 @@ static struct usb_class_driver wdm_class = { static int wdm_wwan_port_start(struct wwan_port *port) { struct wdm_device *desc = wwan_port_get_drvdata(port); + int rv; /* The interface is both exposed via the WWAN framework and as a * legacy usbmisc chardev. If chardev is already open, just fail @@ -848,7 +849,15 @@ static int wdm_wwan_port_start(struct wwan_port *port) wwan_port_txon(port); /* Start getting events */ - return usb_submit_urb(desc->validity, GFP_KERNEL); + rv = usb_submit_urb(desc->validity, GFP_KERNEL); + if (rv < 0) { + wwan_port_txoff(port); + desc->manage_power(desc->intf, 0); + /* this must be last lest we race with chardev open */ + clear_bit(WDM_WWAN_IN_USE, &desc->flags); + } + + return rv; } static void wdm_wwan_port_stop(struct wwan_port *port) From c1846ed4eb527bdfe6b3b7dd2c78e2af4bf98f4f Mon Sep 17 00:00:00 2001 From: Oliver Neukum Date: Tue, 1 Apr 2025 10:45:39 +0200 Subject: [PATCH 19/27] USB: wdm: close race between wdm_open and wdm_wwan_port_stop Clearing WDM_WWAN_IN_USE must be the last action or we can open a chardev whose URBs are still poisoned Fixes: cac6fb015f71 ("usb: class: cdc-wdm: WWAN framework integration") Cc: stable Signed-off-by: Oliver Neukum Link: https://lore.kernel.org/r/20250401084749.175246-3-oneukum@suse.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/class/cdc-wdm.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/usb/class/cdc-wdm.c b/drivers/usb/class/cdc-wdm.c index eb86d1c9b4a4..9c686751ddc1 100644 --- a/drivers/usb/class/cdc-wdm.c +++ b/drivers/usb/class/cdc-wdm.c @@ -726,7 +726,7 @@ static int wdm_open(struct inode *inode, struct file *file) rv = -EBUSY; goto out; } - + smp_rmb(); /* ordered against wdm_wwan_port_stop() */ rv = usb_autopm_get_interface(desc->intf); if (rv < 0) { dev_err(&desc->intf->dev, "Error autopm - %d\n", rv); @@ -868,8 +868,10 @@ static void wdm_wwan_port_stop(struct wwan_port *port) poison_urbs(desc); desc->manage_power(desc->intf, 0); clear_bit(WDM_READ, &desc->flags); - clear_bit(WDM_WWAN_IN_USE, &desc->flags); unpoison_urbs(desc); + smp_wmb(); /* ordered against wdm_open() */ + /* this must be last lest we open a poisoned device */ + clear_bit(WDM_WWAN_IN_USE, &desc->flags); } static void wdm_wwan_port_tx_complete(struct urb *urb) From 1fdc4dca350c0b8ada0b8ebf212504e1ad55e511 Mon Sep 17 00:00:00 2001 From: Oliver Neukum Date: Tue, 1 Apr 2025 10:45:40 +0200 Subject: [PATCH 20/27] USB: wdm: wdm_wwan_port_tx_complete mutex in atomic context wdm_wwan_port_tx_complete is called from a completion handler with irqs disabled and possible in IRQ context usb_autopm_put_interface can take a mutex. Hence usb_autopm_put_interface_async must be used. Fixes: cac6fb015f71 ("usb: class: cdc-wdm: WWAN framework integration") Cc: stable Signed-off-by: Oliver Neukum Link: https://lore.kernel.org/r/20250401084749.175246-4-oneukum@suse.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/class/cdc-wdm.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/class/cdc-wdm.c b/drivers/usb/class/cdc-wdm.c index 9c686751ddc1..fc34a5412690 100644 --- a/drivers/usb/class/cdc-wdm.c +++ b/drivers/usb/class/cdc-wdm.c @@ -879,7 +879,7 @@ static void wdm_wwan_port_tx_complete(struct urb *urb) struct sk_buff *skb = urb->context; struct wdm_device *desc = skb_shinfo(skb)->destructor_arg; - usb_autopm_put_interface(desc->intf); + usb_autopm_put_interface_async(desc->intf); wwan_port_txon(desc->wwanp); kfree_skb(skb); } From 73e9cc1ffd3650b12c4eb059dfdafd56e725ceda Mon Sep 17 00:00:00 2001 From: Oliver Neukum Date: Tue, 1 Apr 2025 10:45:41 +0200 Subject: [PATCH 21/27] USB: wdm: add annotation This is not understandable without a comment on endianness Fixes: afba937e540c9 ("USB: CDC WDM driver") Cc: stable Signed-off-by: Oliver Neukum Link: https://lore.kernel.org/r/20250401084749.175246-5-oneukum@suse.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/class/cdc-wdm.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/class/cdc-wdm.c b/drivers/usb/class/cdc-wdm.c index fc34a5412690..16e7fa4d488d 100644 --- a/drivers/usb/class/cdc-wdm.c +++ b/drivers/usb/class/cdc-wdm.c @@ -909,7 +909,7 @@ static int wdm_wwan_port_tx(struct wwan_port *port, struct sk_buff *skb) req->bRequestType = (USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE); req->bRequest = USB_CDC_SEND_ENCAPSULATED_COMMAND; req->wValue = 0; - req->wIndex = desc->inum; + req->wIndex = desc->inum; /* already converted */ req->wLength = cpu_to_le16(skb->len); skb_shinfo(skb)->destructor_arg = desc; From 37ffdbd695c02189dbf23d6e7d2385e0299587ca Mon Sep 17 00:00:00 2001 From: Miao Li Date: Mon, 14 Apr 2025 14:29:35 +0800 Subject: [PATCH 22/27] usb: quirks: Add delay init quirk for SanDisk 3.2Gen1 Flash Drive The SanDisk 3.2Gen1 Flash Drive, which VID:PID is in 0781:55a3, just like Silicon Motion Flash Drive: https://lore.kernel.org/r/20250401023027.44894-1-limiao870622@163.com also needs the DELAY_INIT quirk, or it will randomly work incorrectly (e.g.: lsusb and can't list this device info) when connecting Huawei hisi platforms and doing thousand of reboot test circles. Cc: stable Signed-off-by: Miao Li Signed-off-by: Lei Huang Link: https://lore.kernel.org/r/20250414062935.159024-1-limiao870622@163.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/quirks.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c index 87b48c176160..36d3df7d040c 100644 --- a/drivers/usb/core/quirks.c +++ b/drivers/usb/core/quirks.c @@ -369,6 +369,9 @@ static const struct usb_device_id usb_quirk_list[] = { { USB_DEVICE(0x0781, 0x5583), .driver_info = USB_QUIRK_NO_LPM }, { USB_DEVICE(0x0781, 0x5591), .driver_info = USB_QUIRK_NO_LPM }, + /* SanDisk Corp. SanDisk 3.2Gen1 */ + { USB_DEVICE(0x0781, 0x55a3), .driver_info = USB_QUIRK_DELAY_INIT }, + /* Realforce 87U Keyboard */ { USB_DEVICE(0x0853, 0x011b), .driver_info = USB_QUIRK_NO_LPM }, From 429a98abfc01d3d4378b7a00969437dc3e8f647c Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Tue, 15 Apr 2025 13:45:08 +0300 Subject: [PATCH 23/27] usb: typec: class: Unlocked on error in typec_register_partner() We recently added some locking to this function but this error path was accidentally missed. Unlock before returning. Fixes: ec27386de23a ("usb: typec: class: Fix NULL pointer access") Cc: stable Signed-off-by: Dan Carpenter Reviewed-by: Heikki Krogerus Link: https://lore.kernel.org/r/Z_44tOtmml89wQcM@stanley.mountain Signed-off-by: Greg Kroah-Hartman --- drivers/usb/typec/class.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/usb/typec/class.c b/drivers/usb/typec/class.c index 3df3e3736916..67a533e35150 100644 --- a/drivers/usb/typec/class.c +++ b/drivers/usb/typec/class.c @@ -1056,6 +1056,7 @@ struct typec_partner *typec_register_partner(struct typec_port *port, ret = device_register(&partner->dev); if (ret) { dev_err(&port->dev, "failed to register partner (%d)\n", ret); + mutex_unlock(&port->partner_link_lock); put_device(&partner->dev); return ERR_PTR(ret); } From 968e1cbb1f6293c3add9607f80b5ce3d29f57583 Mon Sep 17 00:00:00 2001 From: Adam Xue Date: Mon, 14 Apr 2025 14:14:37 -0700 Subject: [PATCH 24/27] USB: serial: option: add Sierra Wireless EM9291 Add Sierra Wireless EM9291. Interface 0: MBIM control 1: MBIM data 3: AT port 4: Diagnostic port T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1199 ProdID=90e3 Rev=00.06 S: Manufacturer=Sierra Wireless, Incorporated S: Product=Sierra Wireless EM9291 S: SerialNumber=xxxxxxxxxxxxxxxx C: #Ifs= 4 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim E: Ad=81(I) Atr=03(Int.) MxPS= 64 Ivl=32ms I: If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim E: Ad=0f(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=8e(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=(none) E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=(none) E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by: Adam Xue Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold --- drivers/usb/serial/option.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 5cd26dac2069..27879cc57536 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -611,6 +611,7 @@ static void option_instat_callback(struct urb *urb); /* Sierra Wireless products */ #define SIERRA_VENDOR_ID 0x1199 #define SIERRA_PRODUCT_EM9191 0x90d3 +#define SIERRA_PRODUCT_EM9291 0x90e3 /* UNISOC (Spreadtrum) products */ #define UNISOC_VENDOR_ID 0x1782 @@ -2432,6 +2433,8 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE_AND_INTERFACE_INFO(SIERRA_VENDOR_ID, SIERRA_PRODUCT_EM9191, 0xff, 0xff, 0x30) }, { USB_DEVICE_AND_INTERFACE_INFO(SIERRA_VENDOR_ID, SIERRA_PRODUCT_EM9191, 0xff, 0xff, 0x40) }, { USB_DEVICE_AND_INTERFACE_INFO(SIERRA_VENDOR_ID, SIERRA_PRODUCT_EM9191, 0xff, 0, 0) }, + { USB_DEVICE_AND_INTERFACE_INFO(SIERRA_VENDOR_ID, SIERRA_PRODUCT_EM9291, 0xff, 0xff, 0x30) }, + { USB_DEVICE_AND_INTERFACE_INFO(SIERRA_VENDOR_ID, SIERRA_PRODUCT_EM9291, 0xff, 0xff, 0x40) }, { USB_DEVICE_AND_INTERFACE_INFO(UNISOC_VENDOR_ID, TOZED_PRODUCT_LT70C, 0xff, 0, 0) }, { USB_DEVICE_AND_INTERFACE_INFO(UNISOC_VENDOR_ID, LUAT_PRODUCT_AIR720U, 0xff, 0, 0) }, { USB_DEVICE_INTERFACE_CLASS(0x1bbb, 0x0530, 0xff), /* TCL IK512 MBIM */ From b399078f882b6e5d32da18b6c696cc84b12f90d5 Mon Sep 17 00:00:00 2001 From: Michael Ehrenreich Date: Mon, 17 Mar 2025 06:17:15 +0100 Subject: [PATCH 25/27] USB: serial: ftdi_sio: add support for Abacus Electrics Optical Probe Abacus Electrics makes optical probes for interacting with smart meters over an optical interface. At least one version uses an FT232B chip (as detected by ftdi_sio) with a custom USB PID, which needs to be added to the list to make the device work in a plug-and-play fashion. Signed-off-by: Michael Ehrenreich Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold --- drivers/usb/serial/ftdi_sio.c | 2 ++ drivers/usb/serial/ftdi_sio_ids.h | 5 +++++ 2 files changed, 7 insertions(+) diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index 9b34e23b7091..6ac7a0a5cf07 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -1093,6 +1093,8 @@ static const struct usb_device_id id_table_combined[] = { { USB_DEVICE_INTERFACE_NUMBER(ALTERA_VID, ALTERA_UB3_602E_PID, 1) }, { USB_DEVICE_INTERFACE_NUMBER(ALTERA_VID, ALTERA_UB3_602E_PID, 2) }, { USB_DEVICE_INTERFACE_NUMBER(ALTERA_VID, ALTERA_UB3_602E_PID, 3) }, + /* Abacus Electrics */ + { USB_DEVICE(FTDI_VID, ABACUS_OPTICAL_PROBE_PID) }, { } /* Terminating entry */ }; diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h index 52be47d684ea..9acb6f837327 100644 --- a/drivers/usb/serial/ftdi_sio_ids.h +++ b/drivers/usb/serial/ftdi_sio_ids.h @@ -442,6 +442,11 @@ #define LINX_FUTURE_1_PID 0xF44B /* Linx future device */ #define LINX_FUTURE_2_PID 0xF44C /* Linx future device */ +/* + * Abacus Electrics + */ +#define ABACUS_OPTICAL_PROBE_PID 0xf458 /* ABACUS ELECTRICS Optical Probe */ + /* * Oceanic product ids */ From 4cc01410e1c1dd075df10f750775c81d1cb6672b Mon Sep 17 00:00:00 2001 From: Craig Hesling Date: Tue, 8 Apr 2025 16:27:03 -0700 Subject: [PATCH 26/27] USB: serial: simple: add OWON HDS200 series oscilloscope support Add serial support for OWON HDS200 series oscilloscopes and likely many other pieces of OWON test equipment. OWON HDS200 series devices host two USB endpoints, designed to facilitate bidirectional SCPI. SCPI is a predominately ASCII text protocol for test/measurement equipment. Having a serial/tty interface for these devices lowers the barrier to entry for anyone trying to write programs to communicate with them. The following shows the USB descriptor for the OWON HDS272S running firmware V5.7.1: Bus 001 Device 068: ID 5345:1234 Owon PDS6062T Oscilloscope Negotiated speed: Full Speed (12Mbps) Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 0 [unknown] bDeviceSubClass 0 [unknown] bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x5345 Owon idProduct 0x1234 PDS6062T Oscilloscope bcdDevice 1.00 iManufacturer 1 oscilloscope iProduct 2 oscilloscope iSerial 3 oscilloscope bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 0x0029 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0x80 (Bus Powered) MaxPower 100mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 5 Physical Interface Device bInterfaceSubClass 0 [unknown] bInterfaceProtocol 0 iInterface 0 ** UNRECOGNIZED: 09 21 11 01 00 01 22 5f 00 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 32 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x01 EP 1 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 32 Device Status: 0x0000 (Bus Powered) OWON appears to be using the same USB Vendor and Product ID for many of their oscilloscopes. Looking at the discussion about the USB vendor/product ID, in the link bellow, suggests that this VID/PID is shared with VDS, SDS, PDS, and now the HDS series oscilloscopes. Available documentation for these devices seems to indicate that all use a similar SCPI protocol, some with RS232 options. It is likely that this same simple serial setup would work correctly for them all. Link: https://usb-ids.gowdy.us/read/UD/5345/1234 Signed-off-by: Craig Hesling Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold --- drivers/usb/serial/usb-serial-simple.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/usb/serial/usb-serial-simple.c b/drivers/usb/serial/usb-serial-simple.c index 2c12449ff60c..a0afaf254d12 100644 --- a/drivers/usb/serial/usb-serial-simple.c +++ b/drivers/usb/serial/usb-serial-simple.c @@ -100,6 +100,11 @@ DEVICE(nokia, NOKIA_IDS); { USB_DEVICE(0x09d7, 0x0100) } /* NovAtel FlexPack GPS */ DEVICE_N(novatel_gps, NOVATEL_IDS, 3); +/* OWON electronic test and measurement equipment driver */ +#define OWON_IDS() \ + { USB_DEVICE(0x5345, 0x1234) } /* HDS200 oscilloscopes and others */ +DEVICE(owon, OWON_IDS); + /* Siemens USB/MPI adapter */ #define SIEMENS_IDS() \ { USB_DEVICE(0x908, 0x0004) } @@ -134,6 +139,7 @@ static struct usb_serial_driver * const serial_drivers[] = { &motorola_tetra_device, &nokia_device, &novatel_gps_device, + &owon_device, &siemens_mpi_device, &suunto_device, &vivopay_device, @@ -153,6 +159,7 @@ static const struct usb_device_id id_table[] = { MOTOROLA_TETRA_IDS(), NOKIA_IDS(), NOVATEL_IDS(), + OWON_IDS(), SIEMENS_IDS(), SUUNTO_IDS(), VIVOPAY_IDS(), From 3dfc0445274252301dfcf3980d79acceea6409d1 Mon Sep 17 00:00:00 2001 From: Heikki Krogerus Date: Mon, 7 Apr 2025 16:33:06 +0300 Subject: [PATCH 27/27] MAINTAINERS: Assign maintainer for the port controller drivers Especially the port manager (tcpm.c) is so major driver that it should have somebody watching over it who really understands it, and the port controller interface in general. Assigning Badhri as the designated reviewer and restoring the status to Maintained from Orphan. Signed-off-by: Heikki Krogerus Cc: Badhri Jagan Sridharan Acked-by: Badhri Jagan Sridharan Link: https://lore.kernel.org/r/20250407133306.387576-1-heikki.krogerus@linux.intel.com Signed-off-by: Greg Kroah-Hartman --- MAINTAINERS | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/MAINTAINERS b/MAINTAINERS index 96b827049501..71408373ce22 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -25126,9 +25126,13 @@ S: Maintained F: drivers/usb/typec/mux/pi3usb30532.c USB TYPEC PORT CONTROLLER DRIVERS +M: Badhri Jagan Sridharan L: linux-usb@vger.kernel.org -S: Orphan -F: drivers/usb/typec/tcpm/ +S: Maintained +F: drivers/usb/typec/tcpm/tcpci.c +F: drivers/usb/typec/tcpm/tcpm.c +F: include/linux/usb/tcpci.h +F: include/linux/usb/tcpm.h USB TYPEC TUSB1046 MUX DRIVER M: Romain Gantois