From 2b50adefed9808a56d84d1de803cad882cc787fa Mon Sep 17 00:00:00 2001 From: Nicolas Thibert Date: Tue, 8 Sep 2026 10:01:08 +0200 Subject: [PATCH] Bluetooth: btusb: fix NXP IW610 composite device handling The NXP IW610 module exposes itself as a composite USB device (0471:0215) with three interfaces: two real Bluetooth HCI interfaces (class 0xe0) and one vendor-specific WiFi interface (class 0xff) used by mwifiex-nxp. The composite device's whole USB descriptor reports class 0xe0/01/01 (Bluetooth), so btusb_table's generic USB_DEVICE_INFO(0xe0, 0x01, 0x01) entry matches every interface, not just the two real HCI ones -- btusb ends up binding the WiFi interface too, and mwifiex-nxp never gets it. Fix: 1. In btusb_table (the table the USB core actually matches against), explicitly ignore the WiFi interface via BTUSB_IGNORE, ahead of the generic entry. 2. In quirks_table, scope the existing BTUSB_MARVELL entry to the BT interface class instead of matching the whole device by VID/PID (harmless either way since quirks_table isn't consulted for initial binding, but keep it correct). Not upstream anywhere: checked NXP's own i.MX kernel fork (nxp-imx/linux-imx), no IW610 references in btusb.c on any branch -- their reference designs wire this chip differently (WiFi over SDIO per their release notes), so they never hit this. Signed-off-by: Nicolas Thibert Cc: stable@vger.kernel.org Assisted-by: LLM (Claude Sonnet 5, Anthropic) Signed-off-by: Luiz Augusto von Dentz --- drivers/bluetooth/btusb.c | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c index 002b9f975710..dc7191bf4234 100644 --- a/drivers/bluetooth/btusb.c +++ b/drivers/bluetooth/btusb.c @@ -71,6 +71,15 @@ static struct usb_driver btusb_driver; #define BTUSB_BROKEN_EXT_SCAN BIT(29) static const struct usb_device_id btusb_table[] = { + /* + * NXP IW610 (0471:0215): the composite device reports Bluetooth + * class at the whole-device level, so the generic entry below + * would also match this WiFi vendor interface. Ignore it here + * first so mwifiex-nxp can bind it instead. + */ + { USB_DEVICE_AND_INTERFACE_INFO(0x0471, 0x0215, 0xff, 0xff, 0xff), + .driver_info = BTUSB_IGNORE }, + /* Generic Bluetooth USB device */ { USB_DEVICE_INFO(0xe0, 0x01, 0x01) }, @@ -477,6 +486,14 @@ static const struct usb_device_id quirks_table[] = { { USB_DEVICE(0x1286, 0x2046), .driver_info = BTUSB_MARVELL }, { USB_DEVICE(0x1286, 0x204e), .driver_info = BTUSB_MARVELL }, + /* + * NXP IW610 BT interfaces (Marvell-lineage silicon, same quirk as + * the 0x1286 entries above). Scoped to the BT interface class, + * not just VID/PID -- see the btusb_table entry above. + */ + { USB_DEVICE_AND_INTERFACE_INFO(0x0471, 0x0215, 0xe0, 0x01, 0x01), + .driver_info = BTUSB_MARVELL }, + /* Intel Bluetooth devices */ { USB_DEVICE(0x8087, 0x0025), .driver_info = BTUSB_INTEL_COMBINED }, { USB_DEVICE(0x8087, 0x0026), .driver_info = BTUSB_INTEL_COMBINED },