arm64: dts: rockchip: enable PCIe on ROCK 4D

The RADXA ROCK 4D board has a PCIe controller connected to a flat flex
connector, compatible with the one the RPi5 uses.

Enable the associated combphy and pcie controller node, as well as add
the remaining pinctrl definition for the reset.

Signed-off-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Link: https://lore.kernel.org/r/20250621-rk3576-rock4d-pcie-v1-1-2b33c9f12955@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
This commit is contained in:
Nicolas Frattaroli 2025-06-21 16:37:55 +02:00 committed by Heiko Stuebner
parent f9f45293f0
commit 29ff4bbff7

View File

@ -194,6 +194,10 @@ vcc_5v0_sys: regulator-vcc-5v0-sys {
};
};
&combphy0_ps {
status = "okay";
};
&combphy1_psu {
status = "okay";
};
@ -652,6 +656,14 @@ rgmii_phy0: ethernet-phy@1 {
};
};
&pcie0 {
pinctrl-names = "default";
pinctrl-0 = <&pcie_reset>;
reset-gpios = <&gpio2 RK_PB4 GPIO_ACTIVE_HIGH>;
vpcie3v3-supply = <&vcc_3v3_pcie>;
status = "okay";
};
&pinctrl {
hym8563 {
hym8563_int: hym8563-int {
@ -678,6 +690,9 @@ pcie {
pcie_pwren: pcie-pwren {
rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
};
pcie_reset: pcie-reset {
rockchip,pins = <2 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
usb {