From 7c3e113ef09d474c4b076c42f1264c4fa78d1dc8 Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Thu, 17 Jul 2025 16:22:13 +0200 Subject: [PATCH 1/8] ARM: dts: ti: omap4: Use generic "ethernet" as node name Common name for Ethernet controllers is "ethernet", not "eth", also recommended by Devicetree specification in "Generic Names Recommendation". Verified lack of impact using dtx_diff. Signed-off-by: Krzysztof Kozlowski Link: https://lore.kernel.org/r/20250717142212.92333-2-krzysztof.kozlowski@linaro.org Signed-off-by: Kevin Hilman --- arch/arm/boot/dts/ti/omap/omap4-sdp.dts | 2 +- arch/arm/boot/dts/ti/omap/omap4-var-om44customboard.dtsi | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/ti/omap/omap4-sdp.dts b/arch/arm/boot/dts/ti/omap/omap4-sdp.dts index b535d24c6140..b550105585a1 100644 --- a/arch/arm/boot/dts/ti/omap/omap4-sdp.dts +++ b/arch/arm/boot/dts/ti/omap/omap4-sdp.dts @@ -467,7 +467,7 @@ &mcspi1 { pinctrl-names = "default"; pinctrl-0 = <&mcspi1_pins>; - eth@0 { + ethernet@0 { pinctrl-names = "default"; pinctrl-0 = <&ks8851_pins>; diff --git a/arch/arm/boot/dts/ti/omap/omap4-var-om44customboard.dtsi b/arch/arm/boot/dts/ti/omap/omap4-var-om44customboard.dtsi index cadc7e02592b..80e89a2f8be1 100644 --- a/arch/arm/boot/dts/ti/omap/omap4-var-om44customboard.dtsi +++ b/arch/arm/boot/dts/ti/omap/omap4-var-om44customboard.dtsi @@ -194,7 +194,7 @@ &mcspi1 { pinctrl-0 = <&mcspi1_pins>; status = "okay"; - eth@0 { + ethernet@0 { compatible = "ks8851"; pinctrl-names = "default"; pinctrl-0 = <&ks8851_irq_pins>; From ca8be8fc2c306efb090791835acfb5b33542ca1d Mon Sep 17 00:00:00 2001 From: Bruno Thomsen Date: Mon, 21 Jul 2025 19:37:41 +0200 Subject: [PATCH 2/8] ARM: dts: am33xx-l4: fix UART compatible Fixes the following dtschema check warning: serial@0 (ti,am3352-uart): compatible: 'oneOf' conditional failed, one must be fixed: ['ti,am3352-uart', 'ti,omap3-uart'] is too long 'ti,am3352-uart' is not one of ['ti,am64-uart', 'ti,j721e-uart'] 'ti,am654-uart' was expected from schema $id: http://devicetree.org/schemas/serial/8250_omap.yaml# Signed-off-by: Bruno Thomsen Reviewed-by: Judith Mendez Link: https://lore.kernel.org/r/20250721173741.6369-1-bruno.thomsen@gmail.com Signed-off-by: Kevin Hilman --- arch/arm/boot/dts/ti/omap/am33xx-l4.dtsi | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/arch/arm/boot/dts/ti/omap/am33xx-l4.dtsi b/arch/arm/boot/dts/ti/omap/am33xx-l4.dtsi index d6a143abae5f..cef24aafed1a 100644 --- a/arch/arm/boot/dts/ti/omap/am33xx-l4.dtsi +++ b/arch/arm/boot/dts/ti/omap/am33xx-l4.dtsi @@ -200,7 +200,7 @@ SYSC_OMAP2_SOFTRESET | ranges = <0x0 0x9000 0x1000>; uart0: serial@0 { - compatible = "ti,am3352-uart", "ti,omap3-uart"; + compatible = "ti,am3352-uart"; clock-frequency = <48000000>; reg = <0x0 0x1000>; interrupts = <72>; @@ -1108,7 +1108,7 @@ SYSC_OMAP2_SOFTRESET | ranges = <0x0 0x22000 0x1000>; uart1: serial@0 { - compatible = "ti,am3352-uart", "ti,omap3-uart"; + compatible = "ti,am3352-uart"; clock-frequency = <48000000>; reg = <0x0 0x1000>; interrupts = <73>; @@ -1139,7 +1139,7 @@ SYSC_OMAP2_SOFTRESET | ranges = <0x0 0x24000 0x1000>; uart2: serial@0 { - compatible = "ti,am3352-uart", "ti,omap3-uart"; + compatible = "ti,am3352-uart"; clock-frequency = <48000000>; reg = <0x0 0x1000>; interrupts = <74>; @@ -1770,7 +1770,7 @@ SYSC_OMAP2_SOFTRESET | ranges = <0x0 0xa6000 0x1000>; uart3: serial@0 { - compatible = "ti,am3352-uart", "ti,omap3-uart"; + compatible = "ti,am3352-uart"; clock-frequency = <48000000>; reg = <0x0 0x1000>; interrupts = <44>; @@ -1799,7 +1799,7 @@ SYSC_OMAP2_SOFTRESET | ranges = <0x0 0xa8000 0x1000>; uart4: serial@0 { - compatible = "ti,am3352-uart", "ti,omap3-uart"; + compatible = "ti,am3352-uart"; clock-frequency = <48000000>; reg = <0x0 0x1000>; interrupts = <45>; @@ -1828,7 +1828,7 @@ SYSC_OMAP2_SOFTRESET | ranges = <0x0 0xaa000 0x1000>; uart5: serial@0 { - compatible = "ti,am3352-uart", "ti,omap3-uart"; + compatible = "ti,am3352-uart"; clock-frequency = <48000000>; reg = <0x0 0x1000>; interrupts = <46>; From 46179394d4e45d561a2c0185774c2f7b88fa7c14 Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Tue, 19 Aug 2025 15:16:52 +0200 Subject: [PATCH 3/8] ARM: dts: omap: dm814x: Split 'reg' per entry Multiple entries in 'reg' should be encoded in separate <>. Signed-off-by: Krzysztof Kozlowski Link: https://lore.kernel.org/r/20250819131651.86569-5-krzysztof.kozlowski@linaro.org Signed-off-by: Kevin Hilman --- arch/arm/boot/dts/ti/omap/dm814x.dtsi | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/arch/arm/boot/dts/ti/omap/dm814x.dtsi b/arch/arm/boot/dts/ti/omap/dm814x.dtsi index a8cd724ce4bc..27d1f35a31fd 100644 --- a/arch/arm/boot/dts/ti/omap/dm814x.dtsi +++ b/arch/arm/boot/dts/ti/omap/dm814x.dtsi @@ -155,10 +155,10 @@ &cppi41dma 26 1 &cppi41dma 27 1 cppi41dma: dma-controller@47402000 { compatible = "ti,am3359-cppi41"; - reg = <0x47400000 0x1000 - 0x47402000 0x1000 - 0x47403000 0x1000 - 0x47404000 0x4000>; + reg = <0x47400000 0x1000>, + <0x47402000 0x1000>, + <0x47403000 0x1000>, + <0x47404000 0x4000>; reg-names = "glue", "controller", "scheduler", "queuemgr"; interrupts = <17>; interrupt-names = "glue"; From 7d7df1bc644a29e880181579994bd2da9fb1a6ce Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Tue, 19 Aug 2025 15:16:53 +0200 Subject: [PATCH 4/8] ARM: dts: omap: dm816x: Split 'reg' per entry Multiple entries in 'reg' should be encoded in separate <>. Signed-off-by: Krzysztof Kozlowski Link: https://lore.kernel.org/r/20250819131651.86569-6-krzysztof.kozlowski@linaro.org Signed-off-by: Kevin Hilman --- arch/arm/boot/dts/ti/omap/dm816x.dtsi | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/arch/arm/boot/dts/ti/omap/dm816x.dtsi b/arch/arm/boot/dts/ti/omap/dm816x.dtsi index b68686f0643b..407d7bc5b13a 100644 --- a/arch/arm/boot/dts/ti/omap/dm816x.dtsi +++ b/arch/arm/boot/dts/ti/omap/dm816x.dtsi @@ -643,10 +643,10 @@ &cppi41dma 26 1 &cppi41dma 27 1 cppi41dma: dma-controller@47402000 { compatible = "ti,am3359-cppi41"; - reg = <0x47400000 0x1000 - 0x47402000 0x1000 - 0x47403000 0x1000 - 0x47404000 0x4000>; + reg = <0x47400000 0x1000>, + <0x47402000 0x1000>, + <0x47403000 0x1000>, + <0x47404000 0x4000>; reg-names = "glue", "controller", "scheduler", "queuemgr"; interrupts = <17>; interrupt-names = "glue"; From 9df7366a29192f860e9e35a258f0b000b6e4a754 Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Tue, 19 Aug 2025 15:16:54 +0200 Subject: [PATCH 5/8] ARM: dts: omap: Minor whitespace cleanup The DTS code coding style expects exactly one space around '=' character. Signed-off-by: Krzysztof Kozlowski Link: https://lore.kernel.org/r/20250819131651.86569-7-krzysztof.kozlowski@linaro.org Signed-off-by: Kevin Hilman --- .../arm/boot/dts/ti/omap/am335x-myirtech-myd.dts | 4 ++-- arch/arm/boot/dts/ti/omap/am335x-sl50.dts | 2 +- arch/arm/boot/dts/ti/omap/am33xx-l4.dtsi | 8 ++++---- arch/arm/boot/dts/ti/omap/am33xx.dtsi | 8 ++++---- .../dts/ti/omap/am57xx-beagle-x15-common.dtsi | 2 +- arch/arm/boot/dts/ti/omap/dra7-l4.dtsi | 14 +++++++------- arch/arm/boot/dts/ti/omap/dra71-evm.dts | 16 ++++++++-------- .../dts/ti/omap/omap3-devkit8000-common.dtsi | 4 ++-- arch/arm/boot/dts/ti/omap/omap3-sbc-t3517.dts | 4 ++-- 9 files changed, 31 insertions(+), 31 deletions(-) diff --git a/arch/arm/boot/dts/ti/omap/am335x-myirtech-myd.dts b/arch/arm/boot/dts/ti/omap/am335x-myirtech-myd.dts index fd91a3c01a63..06a352f98b22 100644 --- a/arch/arm/boot/dts/ti/omap/am335x-myirtech-myd.dts +++ b/arch/arm/boot/dts/ti/omap/am335x-myirtech-myd.dts @@ -143,7 +143,7 @@ &i2c1 { sgtl5000: sgtl5000@a { compatible = "fsl,sgtl5000"; - reg =<0xa>; + reg = <0xa>; clocks = <&clk12m>; micbias-resistor-k-ohms = <4>; micbias-voltage-m-volts = <2250>; @@ -155,7 +155,7 @@ sgtl5000: sgtl5000@a { tda9988: tda9988@70 { compatible = "nxp,tda998x"; - reg =<0x70>; + reg = <0x70>; audio-ports = ; #sound-dai-cells = <0>; diff --git a/arch/arm/boot/dts/ti/omap/am335x-sl50.dts b/arch/arm/boot/dts/ti/omap/am335x-sl50.dts index 757ebd96b3f0..f3524e5ee43e 100644 --- a/arch/arm/boot/dts/ti/omap/am335x-sl50.dts +++ b/arch/arm/boot/dts/ti/omap/am335x-sl50.dts @@ -109,7 +109,7 @@ clocks { audio_mclk_fixed: oscillator@0 { compatible = "fixed-clock"; #clock-cells = <0>; - clock-frequency = <24576000>; /* 24.576MHz */ + clock-frequency = <24576000>; /* 24.576MHz */ }; audio_mclk: audio_mclk_gate@0 { diff --git a/arch/arm/boot/dts/ti/omap/am33xx-l4.dtsi b/arch/arm/boot/dts/ti/omap/am33xx-l4.dtsi index cef24aafed1a..18ad52e93955 100644 --- a/arch/arm/boot/dts/ti/omap/am33xx-l4.dtsi +++ b/arch/arm/boot/dts/ti/omap/am33xx-l4.dtsi @@ -1457,10 +1457,10 @@ SYSC_OMAP2_SOFTRESET | gpio1: gpio@0 { compatible = "ti,omap4-gpio"; - gpio-ranges = <&am33xx_pinmux 0 0 8>, - <&am33xx_pinmux 8 90 4>, - <&am33xx_pinmux 12 12 16>, - <&am33xx_pinmux 28 30 4>; + gpio-ranges = <&am33xx_pinmux 0 0 8>, + <&am33xx_pinmux 8 90 4>, + <&am33xx_pinmux 12 12 16>, + <&am33xx_pinmux 28 30 4>; gpio-controller; #gpio-cells = <2>; interrupt-controller; diff --git a/arch/arm/boot/dts/ti/omap/am33xx.dtsi b/arch/arm/boot/dts/ti/omap/am33xx.dtsi index 0614ffdc1578..43ec2a95f4bb 100644 --- a/arch/arm/boot/dts/ti/omap/am33xx.dtsi +++ b/arch/arm/boot/dts/ti/omap/am33xx.dtsi @@ -461,10 +461,10 @@ &cppi41dma 26 1 &cppi41dma 27 1 cppi41dma: dma-controller@2000 { compatible = "ti,am3359-cppi41"; - reg = <0x0000 0x1000>, - <0x2000 0x1000>, - <0x3000 0x1000>, - <0x4000 0x4000>; + reg = <0x0000 0x1000>, + <0x2000 0x1000>, + <0x3000 0x1000>, + <0x4000 0x4000>; reg-names = "glue", "controller", "scheduler", "queuemgr"; interrupts = <17>; interrupt-names = "glue"; diff --git a/arch/arm/boot/dts/ti/omap/am57xx-beagle-x15-common.dtsi b/arch/arm/boot/dts/ti/omap/am57xx-beagle-x15-common.dtsi index 994e69ab38d7..87b61a98d5e9 100644 --- a/arch/arm/boot/dts/ti/omap/am57xx-beagle-x15-common.dtsi +++ b/arch/arm/boot/dts/ti/omap/am57xx-beagle-x15-common.dtsi @@ -149,7 +149,7 @@ led3 { gpio_fan: gpio_fan { /* Based on 5v 500mA AFB02505HHB */ compatible = "gpio-fan"; - gpios = <&tps659038_gpio 2 GPIO_ACTIVE_HIGH>; + gpios = <&tps659038_gpio 2 GPIO_ACTIVE_HIGH>; gpio-fan,speed-map = <0 0>, <13000 1>; #cooling-cells = <2>; diff --git a/arch/arm/boot/dts/ti/omap/dra7-l4.dtsi b/arch/arm/boot/dts/ti/omap/dra7-l4.dtsi index ba7fdaae9c6e..c9282f57ffa5 100644 --- a/arch/arm/boot/dts/ti/omap/dra7-l4.dtsi +++ b/arch/arm/boot/dts/ti/omap/dra7-l4.dtsi @@ -267,8 +267,8 @@ usb2_phy1: phy@4000 { syscon-phy-power = <&scm_conf 0x300>; clocks = <&usb_phy1_always_on_clk32k>, <&l3init_clkctrl DRA7_L3INIT_USB_OTG_SS1_CLKCTRL 8>; - clock-names = "wkupclk", - "refclk"; + clock-names = "wkupclk", + "refclk"; #phy-cells = <0>; }; @@ -279,8 +279,8 @@ usb2_phy2: phy@5000 { syscon-phy-power = <&scm_conf 0xe74>; clocks = <&usb_phy2_always_on_clk32k>, <&l3init_clkctrl DRA7_L3INIT_USB_OTG_SS2_CLKCTRL 8>; - clock-names = "wkupclk", - "refclk"; + clock-names = "wkupclk", + "refclk"; #phy-cells = <0>; }; @@ -294,9 +294,9 @@ usb3_phy1: phy@4400 { clocks = <&usb_phy3_always_on_clk32k>, <&sys_clkin1>, <&l3init_clkctrl DRA7_L3INIT_USB_OTG_SS1_CLKCTRL 8>; - clock-names = "wkupclk", - "sysclk", - "refclk"; + clock-names = "wkupclk", + "sysclk", + "refclk"; #phy-cells = <0>; }; }; diff --git a/arch/arm/boot/dts/ti/omap/dra71-evm.dts b/arch/arm/boot/dts/ti/omap/dra71-evm.dts index f747ac56eb92..1d2df8128cfe 100644 --- a/arch/arm/boot/dts/ti/omap/dra71-evm.dts +++ b/arch/arm/boot/dts/ti/omap/dra71-evm.dts @@ -83,10 +83,10 @@ lp8733: lp8733@60 { compatible = "ti,lp8733"; reg = <0x60>; - buck0-in-supply =<&vsys_3v3>; - buck1-in-supply =<&vsys_3v3>; - ldo0-in-supply =<&evm_5v0>; - ldo1-in-supply =<&evm_5v0>; + buck0-in-supply = <&vsys_3v3>; + buck1-in-supply = <&vsys_3v3>; + ldo0-in-supply = <&evm_5v0>; + ldo1-in-supply = <&evm_5v0>; lp8733_regulators: regulators { lp8733_buck0_reg: buck0 { @@ -131,10 +131,10 @@ lp8732: lp8732@61 { compatible = "ti,lp8732"; reg = <0x61>; - buck0-in-supply =<&vsys_3v3>; - buck1-in-supply =<&vsys_3v3>; - ldo0-in-supply =<&vsys_3v3>; - ldo1-in-supply =<&vsys_3v3>; + buck0-in-supply = <&vsys_3v3>; + buck1-in-supply = <&vsys_3v3>; + ldo0-in-supply = <&vsys_3v3>; + ldo1-in-supply = <&vsys_3v3>; lp8732_regulators: regulators { lp8732_buck0_reg: buck0 { diff --git a/arch/arm/boot/dts/ti/omap/omap3-devkit8000-common.dtsi b/arch/arm/boot/dts/ti/omap/omap3-devkit8000-common.dtsi index 07d5894ebb74..910e3b54f530 100644 --- a/arch/arm/boot/dts/ti/omap/omap3-devkit8000-common.dtsi +++ b/arch/arm/boot/dts/ti/omap/omap3-devkit8000-common.dtsi @@ -275,8 +275,8 @@ filesystem@680000 { ethernet@6,0 { compatible = "davicom,dm9000"; - reg = <6 0x000 2>, - <6 0x400 2>; /* CS6, offset 0 and 0x400, IO size 2 */ + reg = <6 0x000 2>, + <6 0x400 2>; /* CS6, offset 0 and 0x400, IO size 2 */ bank-width = <2>; interrupt-parent = <&gpio1>; interrupts = <25 IRQ_TYPE_LEVEL_LOW>; diff --git a/arch/arm/boot/dts/ti/omap/omap3-sbc-t3517.dts b/arch/arm/boot/dts/ti/omap/omap3-sbc-t3517.dts index 07bec48dc441..959fdeeb769e 100644 --- a/arch/arm/boot/dts/ti/omap/omap3-sbc-t3517.dts +++ b/arch/arm/boot/dts/ti/omap/omap3-sbc-t3517.dts @@ -57,8 +57,8 @@ &mmc1_pins &mmc1_aux_pins >; - wp-gpios = <&gpio2 27 GPIO_ACTIVE_HIGH>; /* gpio_59 */ - cd-gpios = <&gpio5 16 GPIO_ACTIVE_HIGH>; /* gpio_144 */ + wp-gpios = <&gpio2 27 GPIO_ACTIVE_HIGH>; /* gpio_59 */ + cd-gpios = <&gpio5 16 GPIO_ACTIVE_HIGH>; /* gpio_144 */ }; &dss { From 9658a92fad1889ff92fa4bd668cd61052687245a Mon Sep 17 00:00:00 2001 From: Jihed Chaibi Date: Sat, 23 Aug 2025 00:25:30 +0200 Subject: [PATCH 6/8] ARM: dts: ti: omap: am335x-baltos: Fix ti,en-ck32k-xtal property in DTS to use correct boolean syntax The ti,en-ck32k-xtal property, defined as a boolean in the Device Tree schema, was incorrectly assigned a value (<1>) in the DTS file, causing a validation error: "size (4) error for type flag". The driver uses of_property_read_bool(), expecting a boolean. Remove the value to fix the dtbs_check error. Fixes: 262178b6b8e5 ("ARM: dts: split am335x-baltos-ir5221 into dts and dtsi files") Signed-off-by: Jihed Chaibi Link: https://lore.kernel.org/all/20250822222530.113520-1-jihed.chaibi.dev@gmail.com/ Link: https://lore.kernel.org/r/20250822222530.113520-1-jihed.chaibi.dev@gmail.com Signed-off-by: Kevin Hilman --- arch/arm/boot/dts/ti/omap/am335x-baltos.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/ti/omap/am335x-baltos.dtsi b/arch/arm/boot/dts/ti/omap/am335x-baltos.dtsi index ae2e8dffbe04..ea47f9960c35 100644 --- a/arch/arm/boot/dts/ti/omap/am335x-baltos.dtsi +++ b/arch/arm/boot/dts/ti/omap/am335x-baltos.dtsi @@ -269,7 +269,7 @@ &tps { vcc7-supply = <&vbat>; vccio-supply = <&vbat>; - ti,en-ck32k-xtal = <1>; + ti,en-ck32k-xtal; regulators { vrtc_reg: regulator@0 { From 5af5b85505bc859adb338fe5d6e4842e72cdf932 Mon Sep 17 00:00:00 2001 From: Jihed Chaibi Date: Sat, 23 Aug 2025 00:50:52 +0200 Subject: [PATCH 7/8] ARM: dts: ti: omap: omap3-devkit8000-lcd: Fix ti,keep-vref-on property to use correct boolean syntax in DTS The ti,keep-vref-on property, defined as a boolean flag in the Device Tree schema, was incorrectly assigned a value (<1>) in the DTS file, causing a validation error: "size (4) error for type flag". Remove the value to match the schema and ensure compatibility with the driver using device_property_read_bool(). This fixes the dtbs_check error. Fixes: ed05637c30e6 ("ARM: dts: omap3-devkit8000: Add ADS7846 Touchscreen support") Signed-off-by: Jihed Chaibi Link: https://lore.kernel.org/r/20250822225052.136919-1-jihed.chaibi.dev@gmail.com Signed-off-by: Kevin Hilman --- arch/arm/boot/dts/ti/omap/omap3-devkit8000-lcd-common.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/ti/omap/omap3-devkit8000-lcd-common.dtsi b/arch/arm/boot/dts/ti/omap/omap3-devkit8000-lcd-common.dtsi index a7f99ae0c1fe..78c657429f64 100644 --- a/arch/arm/boot/dts/ti/omap/omap3-devkit8000-lcd-common.dtsi +++ b/arch/arm/boot/dts/ti/omap/omap3-devkit8000-lcd-common.dtsi @@ -65,7 +65,7 @@ ads7846@0 { ti,debounce-max = /bits/ 16 <10>; ti,debounce-tol = /bits/ 16 <5>; ti,debounce-rep = /bits/ 16 <1>; - ti,keep-vref-on = <1>; + ti,keep-vref-on; ti,settle-delay-usec = /bits/ 16 <150>; wakeup-source; From 27322753c8b913fba05250e7b5abb1da31e6ed23 Mon Sep 17 00:00:00 2001 From: Jihed Chaibi Date: Sat, 30 Aug 2025 23:59:57 +0200 Subject: [PATCH 8/8] ARM: dts: omap: am335x-cm-t335: Remove unused mcasp num-serializer property The dtbs_check validation for am335x-cm-t335.dtb flags an error for an unevaluated 'num-serializer' property in the mcasp0 node. This property is obsolete; it is not defined in the davinci-mcasp-audio schema and is not used by the corresponding (or any) driver. Remove this unused property to fix the schema validation warning. Fixes: 48ab364478e77 ("ARM: dts: cm-t335: add audio support") Signed-off-by: Jihed Chaibi Link: https://lore.kernel.org/r/20250830215957.285694-1-jihed.chaibi.dev@gmail.com Signed-off-by: Kevin Hilman --- arch/arm/boot/dts/ti/omap/am335x-cm-t335.dts | 2 -- 1 file changed, 2 deletions(-) diff --git a/arch/arm/boot/dts/ti/omap/am335x-cm-t335.dts b/arch/arm/boot/dts/ti/omap/am335x-cm-t335.dts index 06767ea164b5..ece7f7854f6a 100644 --- a/arch/arm/boot/dts/ti/omap/am335x-cm-t335.dts +++ b/arch/arm/boot/dts/ti/omap/am335x-cm-t335.dts @@ -483,8 +483,6 @@ &mcasp1 { op-mode = <0>; /* MCASP_IIS_MODE */ tdm-slots = <2>; - /* 16 serializers */ - num-serializer = <16>; serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */ 0 0 2 1 0 0 0 0 0 0 0 0 0 0 0 0 >;