github-mirror/linux
1
0
Fork 0
mirror of https://github.com/torvalds/linux.git synced 2026-05-12 16:18:45 +02:00
Code Issues Actions Packages Projects Releases Wiki Activity

mtd: spinand: winbond: Clarify when to enable the HS bit

Browse Source 
Above 104MHz when in fast dual or quad I/O reads, the delay between
address and data cycles is too short. It is possible to reach higher
frequencies, up to 166MHz, by adding a few more dummy cycles through the
setting of the HS bit. Improve the condition for enabling this bit, and
also make sure we set it at soon as we go over 104MHz.

Fixes: f1a91175fa ("mtd: spinand: winbond: Enable high-speed modes on w25n0xjw")
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
This commit is contained in:
Miquel Raynal 2026-03-18 11:47:50 +01:00
parent 54dcd6aa69
commit 25a915fad5
1 changed files with 8 additions and 5 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

13
drivers/mtd/nand/spi/winbond.c
View File

@ -337,16 +337,19 @@ static int w25n0xjw_hs_cfg(struct spinand_device *spinand,
if (iface != SSDR)
return -EOPNOTSUPP;
/*
* SDR dual and quad I/O operations over 104MHz require the HS bit to
* enable a few more dummy cycles.
*/
op = spinand->op_templates->read_cache;
if (op->cmd.dtr || op->addr.dtr || op->dummy.dtr || op->data.dtr)
hs = false;
else if (op->cmd.buswidth == 1 && op->addr.buswidth == 1 &&
op->dummy.buswidth == 1 && op->data.buswidth == 1)
else if (op->cmd.buswidth != 1 || op->addr.buswidth == 1)
hs = false;
else if (op->max_freq && op->max_freq <= 104 * HZ_PER_MHZ)
hs = false;
else if (!op->max_freq)
hs = true;
else
hs = false;
hs = true;
ret = spinand_read_reg_op(spinand, W25N0XJW_SR4, &sr4);
if (ret)