arm64: dts: ti: k3-j784s4-main.dtsi: Move c71_3 node to appropriate order

The device tree nodes should be ordered by unit addresses in ascending
order.

Correct the order by moving the c71_3 DSP node at the end as it has a
higher unit address.

Signed-off-by: Abhash Kumar Jha <a-kumar2@ti.com>
Reviewed-by: Udit Kumar <u-kumar1@ti.com>
Link: https://patch.msgid.link/20260112085113.3476193-2-a-kumar2@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
This commit is contained in:
Abhash Kumar Jha 2026-01-12 14:21:12 +05:30 committed by Nishanth Menon
parent 319fff9c7d
commit 24c9d5fb8b

View File

@ -6,19 +6,6 @@
*/
&cbass_main {
c71_3: dsp@67800000 {
compatible = "ti,j721s2-c71-dsp";
reg = <0x00 0x67800000 0x00 0x00080000>,
<0x00 0x67e00000 0x00 0x0000c000>;
reg-names = "l2sram", "l1dram";
resets = <&k3_reset 40 1>;
firmware-name = "j784s4-c71_3-fw";
ti,sci = <&sms>;
ti,sci-dev-id = <40>;
ti,sci-proc-ids = <0x33 0xff>;
status = "disabled";
};
pcie2_rc: pcie@2920000 {
compatible = "ti,j784s4-pcie-host";
reg = <0x00 0x02920000 0x00 0x1000>,
@ -113,6 +100,19 @@ serdes2: serdes@5020000 {
status = "disabled";
};
};
c71_3: dsp@67800000 {
compatible = "ti,j721s2-c71-dsp";
reg = <0x00 0x67800000 0x00 0x00080000>,
<0x00 0x67e00000 0x00 0x0000c000>;
reg-names = "l2sram", "l1dram";
resets = <&k3_reset 40 1>;
firmware-name = "j784s4-c71_3-fw";
ti,sci = <&sms>;
ti,sci-dev-id = <40>;
ti,sci-proc-ids = <0x33 0xff>;
status = "disabled";
};
};
&scm_conf {