From 8a943c6021ba8b95a36c842327e468df1fddd4a7 Mon Sep 17 00:00:00 2001 From: Jernej Skrabec Date: Tue, 14 May 2019 22:43:36 +0200 Subject: [PATCH 1/3] drm/sun4i: Fix sun8i HDMI PHY clock initialization Current code initializes HDMI PHY clock driver before reset line is deasserted and clocks enabled. Because of that, initial readout of clock divider is incorrect (0 instead of 2). This causes any clock rate with divider 1 (register value 0) to be set incorrectly. Fix this by moving initialization of HDMI PHY clock driver after reset line is deasserted and clocks enabled. Cc: stable@vger.kernel.org # 4.17+ Fixes: 4f86e81748fe ("drm/sun4i: Add support for H3 HDMI PHY variant") Signed-off-by: Jernej Skrabec Signed-off-by: Maxime Ripard Link: https://patchwork.freedesktop.org/patch/msgid/20190514204337.11068-2-jernej.skrabec@siol.net --- drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c | 26 ++++++++++++++------------ 1 file changed, 14 insertions(+), 12 deletions(-) diff --git a/drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c b/drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c index 66ea3a902e36..afc6d4a9c20b 100644 --- a/drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c +++ b/drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c @@ -672,22 +672,13 @@ int sun8i_hdmi_phy_probe(struct sun8i_dw_hdmi *hdmi, struct device_node *node) goto err_put_clk_pll0; } } - - ret = sun8i_phy_clk_create(phy, dev, - phy->variant->has_second_pll); - if (ret) { - dev_err(dev, "Couldn't create the PHY clock\n"); - goto err_put_clk_pll1; - } - - clk_prepare_enable(phy->clk_phy); } phy->rst_phy = of_reset_control_get_shared(node, "phy"); if (IS_ERR(phy->rst_phy)) { dev_err(dev, "Could not get phy reset control\n"); ret = PTR_ERR(phy->rst_phy); - goto err_disable_clk_phy; + goto err_put_clk_pll1; } ret = reset_control_deassert(phy->rst_phy); @@ -708,18 +699,29 @@ int sun8i_hdmi_phy_probe(struct sun8i_dw_hdmi *hdmi, struct device_node *node) goto err_disable_clk_bus; } + if (phy->variant->has_phy_clk) { + ret = sun8i_phy_clk_create(phy, dev, + phy->variant->has_second_pll); + if (ret) { + dev_err(dev, "Couldn't create the PHY clock\n"); + goto err_disable_clk_mod; + } + + clk_prepare_enable(phy->clk_phy); + } + hdmi->phy = phy; return 0; +err_disable_clk_mod: + clk_disable_unprepare(phy->clk_mod); err_disable_clk_bus: clk_disable_unprepare(phy->clk_bus); err_deassert_rst_phy: reset_control_assert(phy->rst_phy); err_put_rst_phy: reset_control_put(phy->rst_phy); -err_disable_clk_phy: - clk_disable_unprepare(phy->clk_phy); err_put_clk_pll1: clk_put(phy->clk_pll1); err_put_clk_pll0: From 831adffb3b7b8df4c8e20b7b00843129fb87a166 Mon Sep 17 00:00:00 2001 From: Jernej Skrabec Date: Tue, 14 May 2019 22:43:37 +0200 Subject: [PATCH 2/3] drm/sun4i: Fix sun8i HDMI PHY configuration for > 148.5 MHz Vendor provided documentation says that EMP bits should be set to 3 for pixel clocks greater than 148.5 MHz. Fix that. Cc: stable@vger.kernel.org # 4.17+ Fixes: 4f86e81748fe ("drm/sun4i: Add support for H3 HDMI PHY variant") Signed-off-by: Jernej Skrabec Signed-off-by: Maxime Ripard Link: https://patchwork.freedesktop.org/patch/msgid/20190514204337.11068-3-jernej.skrabec@siol.net --- drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c b/drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c index afc6d4a9c20b..43643ad31730 100644 --- a/drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c +++ b/drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c @@ -293,7 +293,8 @@ static int sun8i_hdmi_phy_config_h3(struct dw_hdmi *hdmi, SUN8I_HDMI_PHY_ANA_CFG2_REG_BIGSW | SUN8I_HDMI_PHY_ANA_CFG2_REG_SLV(4); ana_cfg3_init |= SUN8I_HDMI_PHY_ANA_CFG3_REG_AMPCK(9) | - SUN8I_HDMI_PHY_ANA_CFG3_REG_AMP(13); + SUN8I_HDMI_PHY_ANA_CFG3_REG_AMP(13) | + SUN8I_HDMI_PHY_ANA_CFG3_REG_EMP(3); } regmap_update_bits(phy->regs, SUN8I_HDMI_PHY_ANA_CFG1_REG, From 51a0d1a90bff5d90a1a1c58e165928a0dd92268a Mon Sep 17 00:00:00 2001 From: Jagan Teki Date: Mon, 13 May 2019 00:11:26 +0530 Subject: [PATCH 3/3] drm/sun4i: sun6i_mipi_dsi: Fix hsync_porch overflow Loop N1 instruction delay for burst mode devices are computed based on horizontal sync and porch timing values. The current driver is using u16 type for computing this hsync_porch value, which would failed to fit within the u16 type for large sync and porch timings devices. This would result in hsync_porch overflow and eventually computed wrong instruction delay value. Example, timings, where it produces the overflow { .hdisplay = 1080, .hsync_start = 1080 + 408, .hsync_end = 1080 + 408 + 4, .htotal = 1080 + 408 + 4 + 38, } It reproduces the desired delay value 65487 but the correct working value should be 7. So, Fix it by computing hsync_porch value separately with u32 type. Fixes: 1c1a7aa3663c ("drm/sun4i: dsi: Add burst support") Signed-off-by: Jagan Teki Signed-off-by: Maxime Ripard Link: https://patchwork.freedesktop.org/patch/msgid/20190512184128.13720-2-jagan@amarulasolutions.com --- drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c b/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c index 6ff585055a07..bfa7e2b146df 100644 --- a/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c +++ b/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c @@ -457,8 +457,9 @@ static void sun6i_dsi_setup_inst_loop(struct sun6i_dsi *dsi, u16 delay = 50 - 1; if (device->mode_flags & MIPI_DSI_MODE_VIDEO_BURST) { - delay = (mode->htotal - mode->hdisplay) * 150; - delay /= (mode->clock / 1000) * 8; + u32 hsync_porch = (mode->htotal - mode->hdisplay) * 150; + + delay = (hsync_porch / ((mode->clock / 1000) * 8)); delay -= 50; }