usb: cdns3-ti: move reg writes to separate function

The device probe function mixes management code and hardware
initialisation code. Extract the latter into an explicitly named
cdns_ti_reset_and_init_hw() function to clarify intent. It also will
allow easier transition to using runtime PM for triggering HW init.

Reviewed-by: Roger Quadros <rogerq@kernel.org>
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Link: https://lore.kernel.org/r/20250205-s2r-cdns-v7-5-13658a271c3c@bootlin.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commit is contained in:
Théo Lebrun 2025-02-05 18:36:50 +01:00 committed by Greg Kroah-Hartman
parent 17c6526b33
commit 24346dc291

View File

@ -58,6 +58,7 @@ struct cdns_ti {
unsigned vbus_divider:1;
struct clk *usb2_refclk;
struct clk *lpm_clk;
int usb2_refclk_rate_code;
};
static const int cdns_ti_rate_table[] = { /* in KHZ */
@ -98,15 +99,50 @@ static const struct of_dev_auxdata cdns_ti_auxdata[] = {
{},
};
static void cdns_ti_reset_and_init_hw(struct cdns_ti *data)
{
u32 reg;
/* assert RESET */
reg = cdns_ti_readl(data, USBSS_W1);
reg &= ~USBSS_W1_PWRUP_RST;
cdns_ti_writel(data, USBSS_W1, reg);
/* set static config */
reg = cdns_ti_readl(data, USBSS_STATIC_CONFIG);
reg &= ~USBSS1_STATIC_PLL_REF_SEL_MASK;
reg |= data->usb2_refclk_rate_code << USBSS1_STATIC_PLL_REF_SEL_SHIFT;
reg &= ~USBSS1_STATIC_VBUS_SEL_MASK;
if (data->vbus_divider)
reg |= 1 << USBSS1_STATIC_VBUS_SEL_SHIFT;
cdns_ti_writel(data, USBSS_STATIC_CONFIG, reg);
reg = cdns_ti_readl(data, USBSS_STATIC_CONFIG);
/* set USB2_ONLY mode if requested */
reg = cdns_ti_readl(data, USBSS_W1);
if (data->usb2_only)
reg |= USBSS_W1_USB2_ONLY;
/* set default modestrap */
reg |= USBSS_W1_MODESTRAP_SEL;
reg &= ~USBSS_W1_MODESTRAP_MASK;
reg |= USBSS_MODESTRAP_MODE_NONE << USBSS_W1_MODESTRAP_SHIFT;
cdns_ti_writel(data, USBSS_W1, reg);
/* de-assert RESET */
reg |= USBSS_W1_PWRUP_RST;
cdns_ti_writel(data, USBSS_W1, reg);
}
static int cdns_ti_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct device_node *node = pdev->dev.of_node;
struct cdns_ti *data;
int error;
u32 reg;
int rate_code, i;
unsigned long rate;
int error, i;
data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
if (!data)
@ -146,7 +182,11 @@ static int cdns_ti_probe(struct platform_device *pdev)
return -EINVAL;
}
rate_code = i;
data->usb2_refclk_rate_code = i;
data->vbus_divider = device_property_read_bool(dev, "ti,vbus-divider");
data->usb2_only = device_property_read_bool(dev, "ti,usb2-only");
cdns_ti_reset_and_init_hw(data);
pm_runtime_enable(dev);
error = pm_runtime_get_sync(dev);
@ -155,40 +195,6 @@ static int cdns_ti_probe(struct platform_device *pdev)
goto err;
}
/* assert RESET */
reg = cdns_ti_readl(data, USBSS_W1);
reg &= ~USBSS_W1_PWRUP_RST;
cdns_ti_writel(data, USBSS_W1, reg);
/* set static config */
reg = cdns_ti_readl(data, USBSS_STATIC_CONFIG);
reg &= ~USBSS1_STATIC_PLL_REF_SEL_MASK;
reg |= rate_code << USBSS1_STATIC_PLL_REF_SEL_SHIFT;
reg &= ~USBSS1_STATIC_VBUS_SEL_MASK;
data->vbus_divider = device_property_read_bool(dev, "ti,vbus-divider");
if (data->vbus_divider)
reg |= 1 << USBSS1_STATIC_VBUS_SEL_SHIFT;
cdns_ti_writel(data, USBSS_STATIC_CONFIG, reg);
reg = cdns_ti_readl(data, USBSS_STATIC_CONFIG);
/* set USB2_ONLY mode if requested */
reg = cdns_ti_readl(data, USBSS_W1);
data->usb2_only = device_property_read_bool(dev, "ti,usb2-only");
if (data->usb2_only)
reg |= USBSS_W1_USB2_ONLY;
/* set default modestrap */
reg |= USBSS_W1_MODESTRAP_SEL;
reg &= ~USBSS_W1_MODESTRAP_MASK;
reg |= USBSS_MODESTRAP_MODE_NONE << USBSS_W1_MODESTRAP_SHIFT;
cdns_ti_writel(data, USBSS_W1, reg);
/* de-assert RESET */
reg |= USBSS_W1_PWRUP_RST;
cdns_ti_writel(data, USBSS_W1, reg);
error = of_platform_populate(node, NULL, cdns_ti_auxdata, dev);
if (error) {
dev_err(dev, "failed to create children: %d\n", error);