mirror of
https://github.com/torvalds/linux.git
synced 2026-06-08 14:42:37 +02:00
arm: dts: add rk3288 miqi board
Change-Id: I2056e5698bc9f3ccad773859fd5168607516b6eb Signed-off-by: Jacob Chen <jacob2.chen@rock-chips.com>
This commit is contained in:
Jacob Chen
Huang, Tao
parent
4fe5f7e659
commit
2167cc1b27
|
|
@ -526,6 +526,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += \
|
|||
rk3288-firefly-beta.dtb \
|
||||
rk3288-firefly.dtb \
|
||||
rk3288-miniarm.dtb \
|
||||
rk3288-miqi.dtb \
|
||||
rk3288-popmetal.dtb \
|
||||
rk3288-r89.dtb \
|
||||
rk3288-rock2-square.dtb \
|
||||
|
|
|
|||
545
arch/arm/boot/dts/rk3288-miqi.dts
Normal file
545
arch/arm/boot/dts/rk3288-miqi.dts
Normal file
|
|
@ -0,0 +1,545 @@
|
|||
/*
|
||||
* Copyright 2016 Rockchip, Inc
|
||||
*
|
||||
* This file is dual-licensed: you can use it either under the terms
|
||||
* of the GPL or the X11 license, at your option. Note that this dual
|
||||
* licensing only applies to this file, and not this project as a
|
||||
* whole.
|
||||
*
|
||||
* a) This file is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License as
|
||||
* published by the Free Software Foundation; either version 2 of the
|
||||
* License, or (at your option) any later version.
|
||||
*
|
||||
* This file is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* Or, alternatively,
|
||||
*
|
||||
* b) Permission is hereby granted, free of charge, to any person
|
||||
* obtaining a copy of this software and associated documentation
|
||||
* files (the "Software"), to deal in the Software without
|
||||
* restriction, including without limitation the rights to use,
|
||||
* copy, modify, merge, publish, distribute, sublicense, and/or
|
||||
* sell copies of the Software, and to permit persons to whom the
|
||||
* Software is furnished to do so, subject to the following
|
||||
* conditions:
|
||||
*
|
||||
* The above copyright notice and this permission notice shall be
|
||||
* included in all copies or substantial portions of the Software.
|
||||
*
|
||||
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
|
||||
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
|
||||
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
|
||||
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
|
||||
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
|
||||
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
|
||||
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
|
||||
* OTHER DEALINGS IN THE SOFTWARE.
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
#include <dt-bindings/pwm/pwm.h>
|
||||
#include "rk3288.dtsi"
|
||||
|
||||
/ {
|
||||
compatible = "rockchip,rk3288-miqi", "rockchip,rk3288";
|
||||
|
||||
memory {
|
||||
device_type = "memory";
|
||||
reg = <0x0 0x80000000>;
|
||||
};
|
||||
|
||||
sound {
|
||||
compatible = "simple-audio-card";
|
||||
simple-audio-card,format = "i2s";
|
||||
simple-audio-card,name = "DW-HDMI";
|
||||
simple-audio-card,mclk-fs = <512>;
|
||||
|
||||
simple-audio-card,dai-link@0 { /* I2S - S/PDIF */
|
||||
format = "i2s";
|
||||
cpu {
|
||||
sound-dai = <&i2s>;
|
||||
};
|
||||
codec {
|
||||
sound-dai = <&hdmi>;
|
||||
};
|
||||
};
|
||||
|
||||
/*
|
||||
* If you want to support more cards,
|
||||
* you can add more dai-link node,
|
||||
* such as
|
||||
*
|
||||
* simple-audio-card,dai-link@1 {
|
||||
* ......
|
||||
* }
|
||||
*/
|
||||
|
||||
};
|
||||
|
||||
ext_gmac: external-gmac-clock {
|
||||
compatible = "fixed-clock";
|
||||
clock-frequency = <125000000>;
|
||||
clock-output-names = "ext_gmac";
|
||||
#clock-cells = <0>;
|
||||
};
|
||||
|
||||
gpio-keys {
|
||||
compatible = "gpio-keys";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
autorepeat;
|
||||
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&gkey>;
|
||||
|
||||
button@0 {
|
||||
gpios = <&gpio7 9 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <116>;
|
||||
label = "GPIO Key";
|
||||
linux,input-type = <1>;
|
||||
debounce-interval = <100>;
|
||||
};
|
||||
};
|
||||
|
||||
/* This turns on USB vbus for both host0 (ehci) and host1 (dwc2) */
|
||||
vcc_host: vcc-host-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
enable-active-high;
|
||||
gpio = <&gpio0 14 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&host_vbus_drv>;
|
||||
regulator-name = "vcc_host";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
vcc_phy: vcc-phy-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
enable-active-high;
|
||||
gpio = <&gpio0 6 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <ð_phy_pwr>;
|
||||
regulator-name = "vcc_phy";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
vcc_sys: vsys-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc_sys";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
|
||||
/*
|
||||
* NOTE: vcc_sd isn't hooked up on v1.0 boards where power comes from
|
||||
* vcc_io directly. Those boards won't be able to power cycle SD cards
|
||||
* but it shouldn't hurt to toggle this pin there anyway.
|
||||
*/
|
||||
vcc_sd: sdmmc-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
gpio = <&gpio7 11 GPIO_ACTIVE_LOW>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&sdmmc_pwr>;
|
||||
regulator-name = "vcc_sd";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
startup-delay-us = <100000>;
|
||||
vin-supply = <&vcc_io>;
|
||||
};
|
||||
|
||||
io-domains {
|
||||
compatible = "rockchip,rk3288-io-voltage-domain";
|
||||
rockchip,grf = <&grf>;
|
||||
sdcard-supply = <&vccio_sd>;
|
||||
};
|
||||
|
||||
board-leds {
|
||||
compatible = "gpio-leds";
|
||||
status = "okay";
|
||||
|
||||
work {
|
||||
label = "System";
|
||||
linux,default-trigger = "timer";
|
||||
default-state = "on";
|
||||
gpios = <&gpio7 2 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
fan {
|
||||
label = "Fan";
|
||||
linux,default-trigger = "heartbeat";
|
||||
default-state = "on";
|
||||
gpios = <&gpio0 18 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&cpu0 {
|
||||
cpu0-supply = <&vdd_cpu>;
|
||||
};
|
||||
|
||||
&gpu {
|
||||
status = "okay";
|
||||
mali-supply = <&vdd_gpu>;
|
||||
};
|
||||
|
||||
&emmc {
|
||||
bus-width = <8>;
|
||||
cap-mmc-highspeed;
|
||||
disable-wp;
|
||||
non-removable;
|
||||
clock-frequency = <75000000>;
|
||||
num-slots = <1>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_pwr &emmc_bus8>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&hdmi {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
#sound-dai-cells = <0>;
|
||||
ddc-i2c-bus = <&i2c5>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sdmmc {
|
||||
supports-sd;
|
||||
bus-width = <4>;
|
||||
cap-mmc-highspeed;
|
||||
sd-uhs-sdr12;
|
||||
sd-uhs-sdr25;
|
||||
sd-uhs-sdr50;
|
||||
sd-uhs-sdr104;
|
||||
cap-sd-highspeed;
|
||||
card-detect-delay = <200>;
|
||||
disable-wp; /* wp not hooked up */
|
||||
num-slots = <1>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>;
|
||||
status = "okay";
|
||||
vmmc-supply = <&vcc_sd>;
|
||||
vqmmc-supply = <&vccio_sd>;
|
||||
};
|
||||
|
||||
&gmac {
|
||||
phy-supply = <&vcc_phy>;
|
||||
phy-mode = "rgmii";
|
||||
clock_in_out = "input";
|
||||
snps,reset-gpio = <&gpio4 7 0>;
|
||||
snps,reset-active-low;
|
||||
snps,reset-delays-us = <0 10000 1000000>;
|
||||
assigned-clocks = <&cru SCLK_MAC>;
|
||||
assigned-clock-parents = <&ext_gmac>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&rgmii_pins>;
|
||||
tx_delay = <0x30>;
|
||||
rx_delay = <0x10>;
|
||||
status = "ok";
|
||||
};
|
||||
|
||||
/* ----------------------------------------------------------------------------------
|
||||
I2C
|
||||
0 - PMIC(ACT8846)
|
||||
RTC(HYM8563)
|
||||
SYR827 -> VDD_CPU_FB
|
||||
SYR828 -> VDD_GPU_FB
|
||||
1 - Header-J9
|
||||
2 - Header-J10
|
||||
3 - NC
|
||||
4 - NC
|
||||
5 - HDMI
|
||||
-------------------------------------------------------------------------------------*/
|
||||
&i2c0 {
|
||||
status = "okay";
|
||||
|
||||
clock-frequency = <400000>;
|
||||
|
||||
vdd_cpu: syr827@40 {
|
||||
compatible = "silergy,syr827";
|
||||
fcs,suspend-voltage-selector = <1>;
|
||||
reg = <0x40>;
|
||||
regulator-name = "vdd_cpu";
|
||||
regulator-min-microvolt = <712500>;
|
||||
regulator-max-microvolt = <1500000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-enable-ramp-delay = <300>;
|
||||
regulator-ramp-delay = <8000>;
|
||||
vin-supply = <&vcc_sys>;
|
||||
};
|
||||
|
||||
vdd_gpu: syr828@41 {
|
||||
compatible = "silergy,syr828";
|
||||
fcs,suspend-voltage-selector = <1>;
|
||||
reg = <0x41>;
|
||||
regulator-name = "vdd_gpu";
|
||||
regulator-min-microvolt = <712500>;
|
||||
regulator-max-microvolt = <1500000>;
|
||||
regulator-always-on;
|
||||
vin-supply = <&vcc_sys>;
|
||||
};
|
||||
|
||||
hym8563@51 {
|
||||
compatible = "haoyu,hym8563";
|
||||
reg = <0x51>;
|
||||
|
||||
interrupt-parent = <&gpio0>;
|
||||
interrupts = <4 IRQ_TYPE_EDGE_FALLING>;
|
||||
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pmic_int>;
|
||||
|
||||
#clock-cells = <0>;
|
||||
clock-output-names = "xin32k";
|
||||
};
|
||||
|
||||
act8846: act8846@5a {
|
||||
compatible = "active-semi,act8846";
|
||||
reg = <0x5a>;
|
||||
status = "okay";
|
||||
|
||||
vp1-supply = <&vcc_sys>;
|
||||
vp2-supply = <&vcc_sys>;
|
||||
vp3-supply = <&vcc_sys>;
|
||||
vp4-supply = <&vcc_sys>;
|
||||
inl1-supply = <&vcc_io>;
|
||||
inl2-supply = <&vcc_sys>;
|
||||
inl3-supply = <&vcc_20>;
|
||||
|
||||
regulators {
|
||||
vcc_ddr: REG1 {
|
||||
regulator-name = "VCC_DDR";
|
||||
regulator-min-microvolt = <1200000>;
|
||||
regulator-max-microvolt = <1200000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
vcc_io: REG2 {
|
||||
regulator-name = "VCC_IO";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
vdd_log: REG3 {
|
||||
regulator-name = "VDD_LOG";
|
||||
regulator-min-microvolt = <1000000>;
|
||||
regulator-max-microvolt = <1000000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
vcc_20: REG4 {
|
||||
regulator-name = "VCC_20";
|
||||
regulator-min-microvolt = <2000000>;
|
||||
regulator-max-microvolt = <2000000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
vccio_sd: REG5 {
|
||||
regulator-name = "VCCIO_SD";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
vdd10_lcd: REG6 {
|
||||
regulator-name = "VDD10_LCD";
|
||||
regulator-min-microvolt = <1000000>;
|
||||
regulator-max-microvolt = <1000000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
vcca_codec: REG7 {
|
||||
regulator-name = "VCCA_CODEC";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
vcca_tp: REG8 {
|
||||
regulator-name = "VCCA_TP";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
vccio_pmu: REG9 {
|
||||
regulator-name = "VCCIO_PMU";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
vdd_10: REG10 {
|
||||
regulator-name = "VDD_10";
|
||||
regulator-min-microvolt = <1000000>;
|
||||
regulator-max-microvolt = <1000000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
vcc_18: REG11 {
|
||||
regulator-name = "VCC_18";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
vcc18_lcd: REG12 {
|
||||
regulator-name = "VCC18_LCD";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&i2c1 {
|
||||
status = "okay";
|
||||
/* Add more nodes to your requirement, such as i2c0 */
|
||||
};
|
||||
|
||||
&i2c2 {
|
||||
status = "okay";
|
||||
/* Add more nodes to your requirement, such as i2c2 */
|
||||
};
|
||||
|
||||
&i2c5 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2s {
|
||||
#sound-dai-cells = <0>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&spi2 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&wdt {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pwm0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
/*
|
||||
* Debug Serial Port
|
||||
*/
|
||||
&uart2 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart3 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&vpu {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usbphy {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host0_ehci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&vopb {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&vopb_mmu {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&vopl {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&vopl_mmu {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pinctrl {
|
||||
pcfg_pull_none_drv_8ma: pcfg-pull-none-drv-8ma {
|
||||
drive-strength = <8>;
|
||||
};
|
||||
|
||||
pcfg_pull_up_drv_8ma: pcfg-pull-up-drv-8ma {
|
||||
bias-pull-up;
|
||||
drive-strength = <8>;
|
||||
};
|
||||
|
||||
buttons {
|
||||
gkey: gkey {
|
||||
rockchip,pins = <7 9 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
};
|
||||
};
|
||||
|
||||
pmic {
|
||||
pmic_int: pmic-int {
|
||||
rockchip,pins = <RK_GPIO0 4 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
};
|
||||
};
|
||||
|
||||
sdmmc {
|
||||
/*
|
||||
* Default drive strength isn't enough to achieve even
|
||||
* high-speed mode on EVB board so bump up to 8ma.
|
||||
*/
|
||||
sdmmc_bus4: sdmmc-bus4 {
|
||||
rockchip,pins = <6 16 RK_FUNC_1 &pcfg_pull_up_drv_8ma>,
|
||||
<6 17 RK_FUNC_1 &pcfg_pull_up_drv_8ma>,
|
||||
<6 18 RK_FUNC_1 &pcfg_pull_up_drv_8ma>,
|
||||
<6 19 RK_FUNC_1 &pcfg_pull_up_drv_8ma>;
|
||||
};
|
||||
|
||||
sdmmc_clk: sdmmc-clk {
|
||||
rockchip,pins = <6 20 RK_FUNC_1 &pcfg_pull_none_drv_8ma>;
|
||||
};
|
||||
|
||||
sdmmc_cmd: sdmmc-cmd {
|
||||
rockchip,pins = <6 21 RK_FUNC_1 &pcfg_pull_up_drv_8ma>;
|
||||
};
|
||||
|
||||
sdmmc_pwr: sdmmc-pwr {
|
||||
rockchip,pins = <7 11 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
usb {
|
||||
host_vbus_drv: host-vbus-drv {
|
||||
rockchip,pins = <0 14 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
pwr_3g: pwr-3g {
|
||||
rockchip,pins = <7 8 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
eth_phy {
|
||||
eth_phy_pwr: eth-phy-pwr {
|
||||
rockchip,pins = <0 6 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
};
|
||||
|
||||
Loading…
Reference in New Issue
Block a user