From 1f4f0bcc5255dec5c4c3a1551bf49d8c33b69b20 Mon Sep 17 00:00:00 2001 From: Aldo Conte Date: Tue, 7 Apr 2026 17:17:01 +0200 Subject: [PATCH] iio: light: cm3323: fix reg_conf not being initialized correctly The code stores the return value of i2c_smbus_write_word_data() in data->reg_conf; however, this value represents the result of the write operation and not the value actually written to the configuration register. This meant that the contents of data->reg_conf did not truly reflect the contents of the hardware register. Instead, save the value of the register before the write and use this value in the I2C write. The bug was found by code inspection: i2c_smbus_write_word_data() returns 0 on success, not the value written to the register. Tested using i2c-stub on a Raspberry Pi 3B running a custom 6.19.10 kernel. Before loading the driver, the configuration register 0x00 CM3323_CMD_CONF was populated with 0x0030 using `i2cset -y 11 0x10 0x00 0x0030 w`, encoding an integration time of 320ms in bits[6:4]. Due to incorrect initialization of data->reg_conf in cm3323_init(), the print of integration_time returns 0.040000 instead of the expected 0.320000. This happens because the read of the integration_time depends on cm3323_get_it_bits() that is based on the value of data->reg_conf, which is erroneously set to 0. With this fix applied, data->reg_conf correctly saves 0x0030 after init and the successive integration_time reports 0.320000 as expected. Fixes: 8b0544263761 ("iio: light: Add support for Capella CM3323 color sensor") Cc: stable@vger.kernel.org Signed-off-by: Aldo Conte Signed-off-by: Jonathan Cameron --- drivers/iio/light/cm3323.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/drivers/iio/light/cm3323.c b/drivers/iio/light/cm3323.c index 79ad6e2209ca..0fe61b8a7029 100644 --- a/drivers/iio/light/cm3323.c +++ b/drivers/iio/light/cm3323.c @@ -89,15 +89,14 @@ static int cm3323_init(struct iio_dev *indio_dev) /* enable sensor and set auto force mode */ ret &= ~(CM3323_CONF_SD_BIT | CM3323_CONF_AF_BIT); + data->reg_conf = ret; - ret = i2c_smbus_write_word_data(data->client, CM3323_CMD_CONF, ret); + ret = i2c_smbus_write_word_data(data->client, CM3323_CMD_CONF, data->reg_conf); if (ret < 0) { dev_err(&data->client->dev, "Error writing reg_conf\n"); return ret; } - data->reg_conf = ret; - return 0; }