diff --git a/drivers/phy/rockchip/phy-rockchip-samsung-hdptx.c b/drivers/phy/rockchip/phy-rockchip-samsung-hdptx.c
index 294484da7085..cf79bd4752c8 100644
--- a/drivers/phy/rockchip/phy-rockchip-samsung-hdptx.c
+++ b/drivers/phy/rockchip/phy-rockchip-samsung-hdptx.c
@@ -414,7 +414,6 @@ struct rk_hdptx_phy {
 	/* clk provider */
 	struct clk_hw hw;
 	bool pll_config_dirty;
-	bool restrict_rate_change;
 
 	atomic_t usage_count;
 
@@ -2074,7 +2073,6 @@ static int rk_hdptx_phy_configure(struct phy *phy, union phy_configure_opts *opt
 		if (ret) {
 			dev_err(hdptx->dev, "invalid hdmi params for phy configure\n");
 		} else {
-			hdptx->restrict_rate_change = true;
 			hdptx->pll_config_dirty = true;
 
 			dev_dbg(hdptx->dev, "%s %s rate=%llu bpc=%u\n", __func__,
@@ -2336,41 +2334,17 @@ static int rk_hdptx_phy_clk_determine_rate(struct clk_hw *hw,
 	struct rk_hdptx_phy *hdptx = to_rk_hdptx_phy(hw);
 
 	/*
-	 * Invalidate current clock rate to ensure rk_hdptx_phy_clk_set_rate()
-	 * will be invoked to commit PLL configuration.
+	 * For uncommitted PLL configuration, invalidate the current clock rate
+	 * to ensure rk_hdptx_phy_clk_set_rate() will be always invoked.
+	 * Otherwise, restrict the rate according to the PHY link setup.
 	 */
-	if (hdptx->pll_config_dirty) {
+	if (hdptx->pll_config_dirty)
 		req->rate = 0;
-		return 0;
-	}
-
-	if (hdptx->hdmi_cfg.mode == PHY_HDMI_MODE_FRL) {
+	else if (hdptx->hdmi_cfg.mode == PHY_HDMI_MODE_FRL)
 		req->rate = hdptx->hdmi_cfg.rate;
-		return 0;
-	}
-
-	/*
-	 * FIXME: Temporarily allow altering TMDS char rate via CCF.
-	 * To be dropped as soon as the RK DW HDMI QP bridge driver
-	 * switches to make use of phy_configure().
-	 */
-	if (!hdptx->restrict_rate_change && req->rate != hdptx->hdmi_cfg.rate) {
-		struct phy_configure_opts_hdmi hdmi = {
-			.tmds_char_rate = req->rate,
-		};
-
-		int ret = rk_hdptx_phy_verify_hdmi_config(hdptx, &hdmi, &hdptx->hdmi_cfg);
-
-		if (ret)
-			return ret;
-	}
-
-	/*
-	 * The TMDS char rate shall be adjusted via phy_configure() only,
-	 * hence ensure rk_hdptx_phy_clk_set_rate() won't be invoked with
-	 * a different rate argument.
-	 */
-	req->rate = DIV_ROUND_CLOSEST_ULL(hdptx->hdmi_cfg.rate * 8, hdptx->hdmi_cfg.bpc);
+	else
+		req->rate = DIV_ROUND_CLOSEST_ULL(hdptx->hdmi_cfg.rate * 8,
+						  hdptx->hdmi_cfg.bpc);
 
 	return 0;
 }