From bcfed2a8a61a0f6ee7769f5093a8279a9e50c526 Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Thu, 6 Jun 2013 17:38:11 +0200 Subject: [PATCH 01/33] ARM: shmobile: armadillo800eva: remove left-overs A comment and a #define in board-armadillo800eva.c have been left over after recent changes and are no longer relevant or needed, remove them. Signed-off-by: Guennadi Liakhovetski Signed-off-by: Simon Horman --- arch/arm/mach-shmobile/board-armadillo800eva.c | 9 --------- 1 file changed, 9 deletions(-) diff --git a/arch/arm/mach-shmobile/board-armadillo800eva.c b/arch/arm/mach-shmobile/board-armadillo800eva.c index e115f6742107..66cfd5686578 100644 --- a/arch/arm/mach-shmobile/board-armadillo800eva.c +++ b/arch/arm/mach-shmobile/board-armadillo800eva.c @@ -679,15 +679,6 @@ static struct platform_device vcc_sdhi1 = { }; /* SDHI0 */ -/* - * FIXME - * - * It use polling mode here, since - * CD (= Card Detect) pin is not connected to SDHI0_CD. - * We can use IRQ31 as card detect irq, - * but it needs chattering removal operation - */ -#define IRQ31 irq_pin(31) static struct sh_mobile_sdhi_info sdhi0_info = { .dma_slave_tx = SHDMA_SLAVE_SDHI0_TX, .dma_slave_rx = SHDMA_SLAVE_SDHI0_RX, From c9031fbb35bd44d99c5cfe7d3c97ec238d63643a Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Sun, 26 May 2013 17:53:37 -0700 Subject: [PATCH 02/33] ARM: shmobile: r8a7778: add __initdata on resource and device data These data will be kmemdup()'ed on platform_device_add_resources() and platform_device_add_data() Signed-off-by: Kuninori Morimoto Signed-off-by: Simon Horman --- arch/arm/mach-shmobile/setup-r8a7778.c | 24 ++++++++++++------------ 1 file changed, 12 insertions(+), 12 deletions(-) diff --git a/arch/arm/mach-shmobile/setup-r8a7778.c b/arch/arm/mach-shmobile/setup-r8a7778.c index 80c20392ad7c..b70bfeef2f6c 100644 --- a/arch/arm/mach-shmobile/setup-r8a7778.c +++ b/arch/arm/mach-shmobile/setup-r8a7778.c @@ -53,7 +53,7 @@ .irqs = SCIx_IRQ_MUXED(irq), \ } -static struct plat_sci_port scif_platform_data[] = { +static struct plat_sci_port scif_platform_data[] __initdata = { SCIF_INFO(0xffe40000, gic_iid(0x66)), SCIF_INFO(0xffe41000, gic_iid(0x67)), SCIF_INFO(0xffe42000, gic_iid(0x68)), @@ -63,24 +63,24 @@ static struct plat_sci_port scif_platform_data[] = { }; /* TMU */ -static struct resource sh_tmu0_resources[] = { +static struct resource sh_tmu0_resources[] __initdata = { DEFINE_RES_MEM(0xffd80008, 12), DEFINE_RES_IRQ(gic_iid(0x40)), }; -static struct sh_timer_config sh_tmu0_platform_data = { +static struct sh_timer_config sh_tmu0_platform_data __initdata = { .name = "TMU00", .channel_offset = 0x4, .timer_bit = 0, .clockevent_rating = 200, }; -static struct resource sh_tmu1_resources[] = { +static struct resource sh_tmu1_resources[] __initdata = { DEFINE_RES_MEM(0xffd80014, 12), DEFINE_RES_IRQ(gic_iid(0x41)), }; -static struct sh_timer_config sh_tmu1_platform_data = { +static struct sh_timer_config sh_tmu1_platform_data __initdata = { .name = "TMU01", .channel_offset = 0x10, .timer_bit = 1, @@ -189,7 +189,7 @@ USB_PLATFORM_INFO(ehci); USB_PLATFORM_INFO(ohci); /* Ether */ -static struct resource ether_resources[] = { +static struct resource ether_resources[] __initdata = { DEFINE_RES_MEM(0xfde00000, 0x400), DEFINE_RES_IRQ(gic_iid(0x89)), }; @@ -203,17 +203,17 @@ void __init r8a7778_add_ether_device(struct sh_eth_plat_data *pdata) } /* PFC/GPIO */ -static struct resource pfc_resources[] = { +static struct resource pfc_resources[] __initdata = { DEFINE_RES_MEM(0xfffc0000, 0x118), }; #define R8A7778_GPIO(idx) \ -static struct resource r8a7778_gpio##idx##_resources[] = { \ +static struct resource r8a7778_gpio##idx##_resources[] __initdata = { \ DEFINE_RES_MEM(0xffc40000 + 0x1000 * (idx), 0x30), \ DEFINE_RES_IRQ(gic_iid(0x87)), \ }; \ \ -static struct gpio_rcar_config r8a7778_gpio##idx##_platform_data = { \ +static struct gpio_rcar_config r8a7778_gpio##idx##_platform_data __initdata = { \ .gpio_base = 32 * (idx), \ .irq_base = GPIO_IRQ_BASE(idx), \ .number_of_pins = 32, \ @@ -249,7 +249,7 @@ void __init r8a7778_pinmux_init(void) }; /* SDHI */ -static struct resource sdhi_resources[] = { +static struct resource sdhi_resources[] __initdata = { /* SDHI0 */ DEFINE_RES_MEM(0xFFE4C000, 0x100), DEFINE_RES_IRQ(gic_iid(0x77)), @@ -365,12 +365,12 @@ void __init r8a7778_init_late(void) platform_device_register_full(&ohci_info); } -static struct renesas_intc_irqpin_config irqpin_platform_data = { +static struct renesas_intc_irqpin_config irqpin_platform_data __initdata = { .irq_base = irq_pin(0), /* IRQ0 -> IRQ3 */ .sense_bitfield_width = 2, }; -static struct resource irqpin_resources[] = { +static struct resource irqpin_resources[] __initdata = { DEFINE_RES_MEM(0xfe78001c, 4), /* ICR1 */ DEFINE_RES_MEM(0xfe780010, 4), /* INTPRI */ DEFINE_RES_MEM(0xfe780024, 4), /* INTREQ */ From 474f67587345bf7b32bbd9d2b5621e85500103c5 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Thu, 27 Jun 2013 17:09:01 +0900 Subject: [PATCH 03/33] ARM: shmobile: sh73a0 pinmux platform device cleanup Use DEFINE_RES_MEM() and platform_device_register_simple() to save a couple of lines of code. Signed-off-by: Magnus Damm Acked-by: Laurent Pinchart [ remove const from resource pfc_resources to avoid section miss-match reported by 4.4.5 ] Signed-off-by: Simon Horman --- arch/arm/mach-shmobile/setup-sh73a0.c | 25 ++++++------------------- 1 file changed, 6 insertions(+), 19 deletions(-) diff --git a/arch/arm/mach-shmobile/setup-sh73a0.c b/arch/arm/mach-shmobile/setup-sh73a0.c index 96e7ca1e4e11..79a6040774a4 100644 --- a/arch/arm/mach-shmobile/setup-sh73a0.c +++ b/arch/arm/mach-shmobile/setup-sh73a0.c @@ -61,29 +61,16 @@ void __init sh73a0_map_io(void) iotable_init(sh73a0_io_desc, ARRAY_SIZE(sh73a0_io_desc)); } -static struct resource sh73a0_pfc_resources[] = { - [0] = { - .start = 0xe6050000, - .end = 0xe6057fff, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = 0xe605801c, - .end = 0xe6058027, - .flags = IORESOURCE_MEM, - } -}; - -static struct platform_device sh73a0_pfc_device = { - .name = "pfc-sh73a0", - .id = -1, - .resource = sh73a0_pfc_resources, - .num_resources = ARRAY_SIZE(sh73a0_pfc_resources), +/* PFC */ +static struct resource pfc_resources[] __initdata = { + DEFINE_RES_MEM(0xe6050000, 0x8000), + DEFINE_RES_MEM(0xe605801c, 0x000c), }; void __init sh73a0_pinmux_init(void) { - platform_device_register(&sh73a0_pfc_device); + platform_device_register_simple("pfc-sh73a0", -1, pfc_resources, + ARRAY_SIZE(pfc_resources)); } static struct plat_sci_port scif0_platform_data = { From 34dd9fc04a028edad7658006764c4d18ac3dca73 Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Sun, 26 May 2013 22:05:23 +0900 Subject: [PATCH 04/33] ARM: shmobile: emev2: Remove init_irq declaration in machine description Commit ebafed7a ("ARM: irq: Call irqchip_init if no init_irq function is specified") removed the need to explictly setup the init_irq field in the machine description when using only irqchip_init. Remove that declaration for shmobile as well. Signed-off-by: Maxime Ripard Signed-off-by: Simon Horman --- arch/arm/mach-shmobile/setup-emev2.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/arch/arm/mach-shmobile/setup-emev2.c b/arch/arm/mach-shmobile/setup-emev2.c index 1ccddd228112..6e8b6ac3c6b2 100644 --- a/arch/arm/mach-shmobile/setup-emev2.c +++ b/arch/arm/mach-shmobile/setup-emev2.c @@ -20,7 +20,6 @@ #include #include #include -#include #include #include #include @@ -454,7 +453,6 @@ DT_MACHINE_START(EMEV2_DT, "Generic Emma Mobile EV2 (Flattened Device Tree)") .smp = smp_ops(emev2_smp_ops), .init_early = emev2_init_delay, .nr_irqs = NR_IRQS_LEGACY, - .init_irq = irqchip_init, .init_machine = emev2_add_standard_devices_dt, .dt_compat = emev2_boards_compat_dt, MACHINE_END From 0bdbe04db005e025d3522ad3ae9797a4954528e9 Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Sun, 26 May 2013 22:05:56 +0900 Subject: [PATCH 05/33] ARM: shmobile: r8a73a4: Remove init_irq declaration in machine description Commit ebafed7a ("ARM: irq: Call irqchip_init if no init_irq function is specified") removed the need to explictly setup the init_irq field in the machine description when using only irqchip_init. Remove that declaration for shmobile as well. Signed-off-by: Maxime Ripard Signed-off-by: Simon Horman --- arch/arm/mach-shmobile/setup-r8a73a4.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/arch/arm/mach-shmobile/setup-r8a73a4.c b/arch/arm/mach-shmobile/setup-r8a73a4.c index 7f45c2edbca9..a8c4e41bf27a 100644 --- a/arch/arm/mach-shmobile/setup-r8a73a4.c +++ b/arch/arm/mach-shmobile/setup-r8a73a4.c @@ -18,7 +18,6 @@ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ #include -#include #include #include #include @@ -194,7 +193,6 @@ static const char *r8a73a4_boards_compat_dt[] __initdata = { }; DT_MACHINE_START(R8A73A4_DT, "Generic R8A73A4 (Flattened Device Tree)") - .init_irq = irqchip_init, .init_machine = r8a73a4_add_standard_devices_dt, .init_time = shmobile_timer_init, .dt_compat = r8a73a4_boards_compat_dt, From c7f6085f6ea7b7cf155f470431cf1b12cd999450 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Mon, 1 Jul 2013 15:01:21 +0900 Subject: [PATCH 06/33] ARM: shmobile: ape6evm: Remove init_irq declaration in machine description Remove redundant irqchip_init() callback. The default case of NULL will result in invoking irqchip_init() anyway. Signed-off-by: Magnus Damm [ horms+renesas@verge.net.au: Trimmed patch to remove portion that updates the r8a73a4 SoC and altered the subject to use the same format as the patch that updates the r8a73a4. ] Signed-off-by: Simon Horman --- arch/arm/mach-shmobile/board-ape6evm.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/arch/arm/mach-shmobile/board-ape6evm.c b/arch/arm/mach-shmobile/board-ape6evm.c index 5eb0caa6a7d0..1fbc39a14e25 100644 --- a/arch/arm/mach-shmobile/board-ape6evm.c +++ b/arch/arm/mach-shmobile/board-ape6evm.c @@ -20,7 +20,6 @@ #include #include -#include #include #include #include @@ -102,7 +101,6 @@ static const char *ape6evm_boards_compat_dt[] __initdata = { }; DT_MACHINE_START(APE6EVM_DT, "ape6evm") - .init_irq = irqchip_init, .init_time = shmobile_timer_init, .init_machine = ape6evm_add_standard_devices, .dt_compat = ape6evm_boards_compat_dt, From 125332daf2e4119614c561bc8cbf1f49cd243023 Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Mon, 27 May 2013 18:00:22 +0900 Subject: [PATCH 07/33] ARM: shmobile: r8a7790: Remove init_irq declaration in machine description Commit ebafed7a ("ARM: irq: Call irqchip_init if no init_irq function is specified") removed the need to explictly setup the init_irq field in the machine description when using only irqchip_init. Remove that declaration for shmobile as well. Signed-off-by: Maxime Ripard Signed-off-by: Simon Horman --- arch/arm/mach-shmobile/setup-r8a7790.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/arch/arm/mach-shmobile/setup-r8a7790.c b/arch/arm/mach-shmobile/setup-r8a7790.c index 28f94752b8ff..d405dbd44b07 100644 --- a/arch/arm/mach-shmobile/setup-r8a7790.c +++ b/arch/arm/mach-shmobile/setup-r8a7790.c @@ -19,7 +19,6 @@ */ #include -#include #include #include #include @@ -188,7 +187,6 @@ static const char *r8a7790_boards_compat_dt[] __initdata = { }; DT_MACHINE_START(R8A7790_DT, "Generic R8A7790 (Flattened Device Tree)") - .init_irq = irqchip_init, .init_machine = r8a7790_add_standard_devices_dt, .init_time = r8a7790_timer_init, .dt_compat = r8a7790_boards_compat_dt, From 5f85052c606e38c98de28170a2df72f78931aa30 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Mon, 1 Jul 2013 15:01:31 +0900 Subject: [PATCH 08/33] ARM: shmobile: lager: Remove init_irq declaration in machine description Remove redundant irqchip_init() callback. The default case of NULL will result in invoking irqchip_init() anyway. Signed-off-by: Magnus Damm [ horms+renesas@verge.net.au: Trimmed patch to remove portion that updates the r8a7790 SoC and altered the subject to use the same format as the patch that updates the r8a7790. ] Signed-off-by: Simon Horman --- arch/arm/mach-shmobile/board-lager.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/arch/arm/mach-shmobile/board-lager.c b/arch/arm/mach-shmobile/board-lager.c index d73e21d3ea8a..1e99b17767bb 100644 --- a/arch/arm/mach-shmobile/board-lager.c +++ b/arch/arm/mach-shmobile/board-lager.c @@ -22,7 +22,6 @@ #include #include #include -#include #include #include #include @@ -103,7 +102,6 @@ static const char *lager_boards_compat_dt[] __initdata = { }; DT_MACHINE_START(LAGER_DT, "lager") - .init_irq = irqchip_init, .init_time = r8a7790_timer_init, .init_machine = lager_add_standard_devices, .dt_compat = lager_boards_compat_dt, From 7d6b8883547feacc705c476cdb7f272e309d9fb0 Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Mon, 27 May 2013 18:00:49 +0900 Subject: [PATCH 09/33] ARM: shmobile: sh73a0: Remove init_irq declaration in machine description Commit ebafed7a ("ARM: irq: Call irqchip_init if no init_irq function is specified") removed the need to explictly setup the init_irq field in the machine description when using only irqchip_init. Remove that declaration for shmobile as well. Signed-off-by: Maxime Ripard Signed-off-by: Simon Horman --- arch/arm/mach-shmobile/setup-sh73a0.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/arch/arm/mach-shmobile/setup-sh73a0.c b/arch/arm/mach-shmobile/setup-sh73a0.c index 79a6040774a4..bd9370f26978 100644 --- a/arch/arm/mach-shmobile/setup-sh73a0.c +++ b/arch/arm/mach-shmobile/setup-sh73a0.c @@ -22,7 +22,6 @@ #include #include #include -#include #include #include #include @@ -975,7 +974,6 @@ DT_MACHINE_START(SH73A0_DT, "Generic SH73A0 (Flattened Device Tree)") .map_io = sh73a0_map_io, .init_early = sh73a0_init_delay, .nr_irqs = NR_IRQS_LEGACY, - .init_irq = irqchip_init, .init_machine = sh73a0_add_standard_devices_dt, .dt_compat = sh73a0_boards_compat_dt, MACHINE_END From fc492ba58aa6642f34eba716daf6ec4d2715e492 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Mon, 1 Jul 2013 15:01:40 +0900 Subject: [PATCH 10/33] ARM: shmobile: kzm9g: Remove init_irq declaration in machine description Remove redundant irqchip_init() callback. The default case of NULL will result in invoking irqchip_init() anyway. Signed-off-by: Magnus Damm [ horms+renesas@verge.net.au: Trimmed patch to remove portion that updates the sh73a0 SoC and altered the subject to use the same format as the patch that updates the sh73a0. ] Signed-off-by: Simon Horman --- arch/arm/mach-shmobile/board-kzm9g-reference.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/arch/arm/mach-shmobile/board-kzm9g-reference.c b/arch/arm/mach-shmobile/board-kzm9g-reference.c index 44055fe8a45c..41092bb01ee5 100644 --- a/arch/arm/mach-shmobile/board-kzm9g-reference.c +++ b/arch/arm/mach-shmobile/board-kzm9g-reference.c @@ -24,7 +24,6 @@ #include #include #include -#include #include #include #include @@ -99,7 +98,6 @@ DT_MACHINE_START(KZM9G_DT, "kzm9g-reference") .map_io = sh73a0_map_io, .init_early = sh73a0_init_delay, .nr_irqs = NR_IRQS_LEGACY, - .init_irq = irqchip_init, .init_machine = kzm_init, .init_time = shmobile_timer_init, .dt_compat = kzm9g_boards_compat_dt, From a597d8df88143f7a409b260b1e89735eb0bdca05 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Mon, 1 Jul 2013 14:41:15 +0900 Subject: [PATCH 11/33] ARM: shmobile: Remove unused EMEV2 auxdata and callback Replace the SoC-specific callback init_machine() with a NULL to use the default code. This cleans up the code and reduces the number of lines. Signed-off-by: Magnus Damm Signed-off-by: Simon Horman --- arch/arm/mach-shmobile/setup-emev2.c | 10 ---------- 1 file changed, 10 deletions(-) diff --git a/arch/arm/mach-shmobile/setup-emev2.c b/arch/arm/mach-shmobile/setup-emev2.c index 6e8b6ac3c6b2..b0564ce116e5 100644 --- a/arch/arm/mach-shmobile/setup-emev2.c +++ b/arch/arm/mach-shmobile/setup-emev2.c @@ -434,15 +434,6 @@ void __init emev2_init_irq(void) } #ifdef CONFIG_USE_OF -static const struct of_dev_auxdata emev2_auxdata_lookup[] __initconst = { - { } -}; - -static void __init emev2_add_standard_devices_dt(void) -{ - of_platform_populate(NULL, of_default_bus_match_table, - emev2_auxdata_lookup, NULL); -} static const char *emev2_boards_compat_dt[] __initdata = { "renesas,emev2", @@ -453,7 +444,6 @@ DT_MACHINE_START(EMEV2_DT, "Generic Emma Mobile EV2 (Flattened Device Tree)") .smp = smp_ops(emev2_smp_ops), .init_early = emev2_init_delay, .nr_irqs = NR_IRQS_LEGACY, - .init_machine = emev2_add_standard_devices_dt, .dt_compat = emev2_boards_compat_dt, MACHINE_END From 88378837780166d67a11142cd6f76596c0a2d8c3 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Mon, 1 Jul 2013 14:41:24 +0900 Subject: [PATCH 12/33] ARM: shmobile: Remove unused r8a7740 auxdata table Pass NULL to of_platform_populate instead of passing an empty list. This cleans up the code and reduces the number of lines. Signed-off-by: Magnus Damm Signed-off-by: Simon Horman --- arch/arm/mach-shmobile/setup-r8a7740.c | 16 +++++++++++----- 1 file changed, 11 insertions(+), 5 deletions(-) diff --git a/arch/arm/mach-shmobile/setup-r8a7740.c b/arch/arm/mach-shmobile/setup-r8a7740.c index 00c5a707238b..ac29c2ee011f 100644 --- a/arch/arm/mach-shmobile/setup-r8a7740.c +++ b/arch/arm/mach-shmobile/setup-r8a7740.c @@ -986,16 +986,22 @@ void __init r8a7740_add_early_devices(void) #ifdef CONFIG_USE_OF -static const struct of_dev_auxdata r8a7740_auxdata_lookup[] __initconst = { - { } -}; +void __init r8a7740_add_early_devices_dt(void) +{ + shmobile_setup_delay(800, 1, 3); /* Cortex-A9 @ 800MHz */ + + early_platform_add_devices(r8a7740_early_devices, + ARRAY_SIZE(r8a7740_early_devices)); + + /* setup early console here as well */ + shmobile_setup_console(); +} void __init r8a7740_add_standard_devices_dt(void) { platform_add_devices(r8a7740_devices_dt, ARRAY_SIZE(r8a7740_devices_dt)); - of_platform_populate(NULL, of_default_bus_match_table, - r8a7740_auxdata_lookup, NULL); + of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); } void __init r8a7740_init_delay(void) From 40216263d3d0b9b46688a28a96daf66fe75caa28 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Mon, 1 Jul 2013 14:41:33 +0900 Subject: [PATCH 13/33] ARM: shmobile: Remove unused r8a7778 auxdata and callback Replace the SoC-specific callback init_machine() with a NULL to use the default code. This cleans up the code and reduces the number of lines. Signed-off-by: Magnus Damm Signed-off-by: Simon Horman --- arch/arm/mach-shmobile/setup-r8a7778.c | 11 ----------- 1 file changed, 11 deletions(-) diff --git a/arch/arm/mach-shmobile/setup-r8a7778.c b/arch/arm/mach-shmobile/setup-r8a7778.c index b70bfeef2f6c..2a101ebdedf4 100644 --- a/arch/arm/mach-shmobile/setup-r8a7778.c +++ b/arch/arm/mach-shmobile/setup-r8a7778.c @@ -457,16 +457,6 @@ void __init r8a7778_init_irq_dt(void) r8a7778_init_irq_common(); } -static const struct of_dev_auxdata r8a7778_auxdata_lookup[] __initconst = { - {}, -}; - -void __init r8a7778_add_standard_devices_dt(void) -{ - of_platform_populate(NULL, of_default_bus_match_table, - r8a7778_auxdata_lookup, NULL); -} - static const char *r8a7778_compat_dt[] __initdata = { "renesas,r8a7778", NULL, @@ -475,7 +465,6 @@ static const char *r8a7778_compat_dt[] __initdata = { DT_MACHINE_START(R8A7778_DT, "Generic R8A7778 (Flattened Device Tree)") .init_early = r8a7778_init_delay, .init_irq = r8a7778_init_irq_dt, - .init_machine = r8a7778_add_standard_devices_dt, .init_time = shmobile_timer_init, .dt_compat = r8a7778_compat_dt, .init_late = r8a7778_init_late, From 41b0156ca5a1460f8f6dde7e57baf1b80d6a7030 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Mon, 1 Jul 2013 14:41:46 +0900 Subject: [PATCH 14/33] ARM: shmobile: Remove unused r8a7779 auxdata table Pass NULL to of_platform_populate instead of passing an empty list. This cleans up the code and reduces the number of lines. Signed-off-by: Magnus Damm Signed-off-by: Simon Horman --- arch/arm/mach-shmobile/setup-r8a7779.c | 7 +------ 1 file changed, 1 insertion(+), 6 deletions(-) diff --git a/arch/arm/mach-shmobile/setup-r8a7779.c b/arch/arm/mach-shmobile/setup-r8a7779.c index 398687761f50..66d38261ecaa 100644 --- a/arch/arm/mach-shmobile/setup-r8a7779.c +++ b/arch/arm/mach-shmobile/setup-r8a7779.c @@ -665,10 +665,6 @@ void __init r8a7779_init_delay(void) shmobile_setup_delay(1000, 2, 4); /* Cortex-A9 @ 1000MHz */ } -static const struct of_dev_auxdata r8a7779_auxdata_lookup[] __initconst = { - {}, -}; - void __init r8a7779_add_standard_devices_dt(void) { /* clocks are setup late during boot in the case of DT */ @@ -676,8 +672,7 @@ void __init r8a7779_add_standard_devices_dt(void) platform_add_devices(r8a7779_devices_dt, ARRAY_SIZE(r8a7779_devices_dt)); - of_platform_populate(NULL, of_default_bus_match_table, - r8a7779_auxdata_lookup, NULL); + of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); } static const char *r8a7779_compat_dt[] __initdata = { From 975e5af958916f8b76a8926cd4d50c04936d7079 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Mon, 1 Jul 2013 14:41:55 +0900 Subject: [PATCH 15/33] ARM: shmobile: Remove unused sh7372 auxdata table Pass NULL to of_platform_populate instead of passing an empty list. This cleans up the code and reduces the number of lines. Signed-off-by: Magnus Damm Signed-off-by: Simon Horman --- arch/arm/mach-shmobile/setup-sh7372.c | 7 +------ 1 file changed, 1 insertion(+), 6 deletions(-) diff --git a/arch/arm/mach-shmobile/setup-sh7372.c b/arch/arm/mach-shmobile/setup-sh7372.c index 5502d624aca6..13e6fdbde0a5 100644 --- a/arch/arm/mach-shmobile/setup-sh7372.c +++ b/arch/arm/mach-shmobile/setup-sh7372.c @@ -1147,10 +1147,6 @@ void __init sh7372_add_early_devices_dt(void) shmobile_setup_console(); } -static const struct of_dev_auxdata sh7372_auxdata_lookup[] __initconst = { - { } -}; - void __init sh7372_add_standard_devices_dt(void) { /* clocks are setup late during boot in the case of DT */ @@ -1159,8 +1155,7 @@ void __init sh7372_add_standard_devices_dt(void) platform_add_devices(sh7372_early_devices, ARRAY_SIZE(sh7372_early_devices)); - of_platform_populate(NULL, of_default_bus_match_table, - sh7372_auxdata_lookup, NULL); + of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); } static const char *sh7372_boards_compat_dt[] __initdata = { From ea31597fe72245985e9d2521ea7e87acf2f14252 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Mon, 1 Jul 2013 14:42:04 +0900 Subject: [PATCH 16/33] ARM: shmobile: Remove unused sh73a0 auxdata table Pass NULL to of_platform_populate instead of passing an empty list. This cleans up the code and reduces the number of lines. Signed-off-by: Magnus Damm Signed-off-by: Simon Horman --- arch/arm/mach-shmobile/setup-sh73a0.c | 7 +------ 1 file changed, 1 insertion(+), 6 deletions(-) diff --git a/arch/arm/mach-shmobile/setup-sh73a0.c b/arch/arm/mach-shmobile/setup-sh73a0.c index bd9370f26978..516c2391b47a 100644 --- a/arch/arm/mach-shmobile/setup-sh73a0.c +++ b/arch/arm/mach-shmobile/setup-sh73a0.c @@ -944,10 +944,6 @@ void __init sh73a0_add_early_devices(void) #ifdef CONFIG_USE_OF -static const struct of_dev_auxdata sh73a0_auxdata_lookup[] __initconst = { - {}, -}; - void __init sh73a0_add_standard_devices_dt(void) { struct platform_device_info devinfo = { .name = "cpufreq-cpu0", .id = -1, }; @@ -957,8 +953,7 @@ void __init sh73a0_add_standard_devices_dt(void) platform_add_devices(sh73a0_devices_dt, ARRAY_SIZE(sh73a0_devices_dt)); - of_platform_populate(NULL, of_default_bus_match_table, - sh73a0_auxdata_lookup, NULL); + of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); /* Instantiate cpufreq-cpu0 */ platform_device_register_full(&devinfo); From fdbc45dbbe5a69a2c665630ab577726e01eadf23 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Mon, 1 Jul 2013 14:42:13 +0900 Subject: [PATCH 17/33] ARM: shmobile: Remove redundant r8a7790 callback Replace the SoC-specific callback init_machine() with a NULL to use the default code. This cleans up the code and reduces the number of lines. Signed-off-by: Magnus Damm Signed-off-by: Simon Horman --- arch/arm/mach-shmobile/setup-r8a7790.c | 5 ----- 1 file changed, 5 deletions(-) diff --git a/arch/arm/mach-shmobile/setup-r8a7790.c b/arch/arm/mach-shmobile/setup-r8a7790.c index d405dbd44b07..b7e78b9a7fdf 100644 --- a/arch/arm/mach-shmobile/setup-r8a7790.c +++ b/arch/arm/mach-shmobile/setup-r8a7790.c @@ -176,10 +176,6 @@ void __init r8a7790_timer_init(void) } #ifdef CONFIG_USE_OF -void __init r8a7790_add_standard_devices_dt(void) -{ - of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); -} static const char *r8a7790_boards_compat_dt[] __initdata = { "renesas,r8a7790", @@ -187,7 +183,6 @@ static const char *r8a7790_boards_compat_dt[] __initdata = { }; DT_MACHINE_START(R8A7790_DT, "Generic R8A7790 (Flattened Device Tree)") - .init_machine = r8a7790_add_standard_devices_dt, .init_time = r8a7790_timer_init, .dt_compat = r8a7790_boards_compat_dt, MACHINE_END From 4146fa8861419ac0d2c3607168339621586f6c03 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Tue, 2 Jul 2013 18:27:33 +0900 Subject: [PATCH 18/33] ARM: shmobile: Remove unused EMEV2/KZM9D early console Remove EMEV2 early console code from KZM9D and instead rely on console setup during regular platform device probe time. This makes the DT code and the KZM9D board support behave the same. Signed-off-by: Magnus Damm Acked-by: Arnd Bergmann Signed-off-by: Simon Horman --- arch/arm/mach-shmobile/board-kzm9d.c | 2 +- arch/arm/mach-shmobile/include/mach/emev2.h | 2 +- arch/arm/mach-shmobile/setup-emev2.c | 24 +++------------------ 3 files changed, 5 insertions(+), 23 deletions(-) diff --git a/arch/arm/mach-shmobile/board-kzm9d.c b/arch/arm/mach-shmobile/board-kzm9d.c index 4368000e1127..15900f1f8af7 100644 --- a/arch/arm/mach-shmobile/board-kzm9d.c +++ b/arch/arm/mach-shmobile/board-kzm9d.c @@ -85,7 +85,7 @@ static const char *kzm9d_boards_compat_dt[] __initdata = { DT_MACHINE_START(KZM9D_DT, "kzm9d") .smp = smp_ops(emev2_smp_ops), .map_io = emev2_map_io, - .init_early = emev2_add_early_devices, + .init_early = emev2_init_delay, .nr_irqs = NR_IRQS_LEGACY, .init_irq = emev2_init_irq, .init_machine = kzm9d_add_standard_devices, diff --git a/arch/arm/mach-shmobile/include/mach/emev2.h b/arch/arm/mach-shmobile/include/mach/emev2.h index ac3751705cab..3e0c0441c782 100644 --- a/arch/arm/mach-shmobile/include/mach/emev2.h +++ b/arch/arm/mach-shmobile/include/mach/emev2.h @@ -3,7 +3,7 @@ extern void emev2_map_io(void); extern void emev2_init_irq(void); -extern void emev2_add_early_devices(void); +extern void emev2_init_delay(void); extern void emev2_add_standard_devices(void); extern void emev2_clock_init(void); extern void emev2_set_boot_vector(unsigned long value); diff --git a/arch/arm/mach-shmobile/setup-emev2.c b/arch/arm/mach-shmobile/setup-emev2.c index b0564ce116e5..f6edd190a6b4 100644 --- a/arch/arm/mach-shmobile/setup-emev2.c +++ b/arch/arm/mach-shmobile/setup-emev2.c @@ -375,14 +375,11 @@ static struct platform_device pmu_device = { .resource = pmu_resources, }; -static struct platform_device *emev2_early_devices[] __initdata = { +static struct platform_device *emev2_devices[] __initdata = { &uart0_device, &uart1_device, &uart2_device, &uart3_device, -}; - -static struct platform_device *emev2_late_devices[] __initdata = { &sti_device, &gio0_device, &gio1_device, @@ -396,29 +393,14 @@ void __init emev2_add_standard_devices(void) { emev2_clock_init(); - platform_add_devices(emev2_early_devices, - ARRAY_SIZE(emev2_early_devices)); - - platform_add_devices(emev2_late_devices, - ARRAY_SIZE(emev2_late_devices)); + platform_add_devices(emev2_devices, ARRAY_SIZE(emev2_devices)); } -static void __init emev2_init_delay(void) +void __init emev2_init_delay(void) { shmobile_setup_delay(533, 1, 3); /* Cortex-A9 @ 533MHz */ } -void __init emev2_add_early_devices(void) -{ - emev2_init_delay(); - - early_platform_add_devices(emev2_early_devices, - ARRAY_SIZE(emev2_early_devices)); - - /* setup early console here as well */ - shmobile_setup_console(); -} - void __init emev2_init_irq(void) { void __iomem *gic_dist_base; From 210e179da2e39c965872b941a36e55ab78328e49 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Tue, 2 Jul 2013 18:27:49 +0900 Subject: [PATCH 19/33] ARM: shmobile: Make EMEV2 platform devices more compact Convert the EMEV2 SoC device setup code from using very verbose resources and static platform devices to the same style as more recent boards. This reduces the size of the code. Signed-off-by: Magnus Damm Acked-by: Arnd Bergmann Signed-off-by: Simon Horman --- arch/arm/mach-shmobile/setup-emev2.c | 321 +++++---------------------- 1 file changed, 61 insertions(+), 260 deletions(-) diff --git a/arch/arm/mach-shmobile/setup-emev2.c b/arch/arm/mach-shmobile/setup-emev2.c index f6edd190a6b4..e4b46930db52 100644 --- a/arch/arm/mach-shmobile/setup-emev2.c +++ b/arch/arm/mach-shmobile/setup-emev2.c @@ -62,102 +62,40 @@ void __init emev2_map_io(void) /* UART */ static struct resource uart0_resources[] = { - [0] = { - .start = 0xe1020000, - .end = 0xe1020037, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = 40, - .flags = IORESOURCE_IRQ, - } -}; - -static struct platform_device uart0_device = { - .name = "serial8250-em", - .id = 0, - .num_resources = ARRAY_SIZE(uart0_resources), - .resource = uart0_resources, + DEFINE_RES_MEM(0xe1020000, 0x38), + DEFINE_RES_IRQ(40), }; static struct resource uart1_resources[] = { - [0] = { - .start = 0xe1030000, - .end = 0xe1030037, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = 41, - .flags = IORESOURCE_IRQ, - } -}; - -static struct platform_device uart1_device = { - .name = "serial8250-em", - .id = 1, - .num_resources = ARRAY_SIZE(uart1_resources), - .resource = uart1_resources, + DEFINE_RES_MEM(0xe1030000, 0x38), + DEFINE_RES_IRQ(41), }; static struct resource uart2_resources[] = { - [0] = { - .start = 0xe1040000, - .end = 0xe1040037, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = 42, - .flags = IORESOURCE_IRQ, - } -}; - -static struct platform_device uart2_device = { - .name = "serial8250-em", - .id = 2, - .num_resources = ARRAY_SIZE(uart2_resources), - .resource = uart2_resources, + DEFINE_RES_MEM(0xe1040000, 0x38), + DEFINE_RES_IRQ(42), }; static struct resource uart3_resources[] = { - [0] = { - .start = 0xe1050000, - .end = 0xe1050037, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = 43, - .flags = IORESOURCE_IRQ, - } + DEFINE_RES_MEM(0xe1050000, 0x38), + DEFINE_RES_IRQ(43), }; -static struct platform_device uart3_device = { - .name = "serial8250-em", - .id = 3, - .num_resources = ARRAY_SIZE(uart3_resources), - .resource = uart3_resources, -}; +#define emev2_register_uart(idx) \ + platform_device_register_simple("serial8250-em", idx, \ + uart##idx##_resources, \ + ARRAY_SIZE(uart##idx##_resources)) /* STI */ static struct resource sti_resources[] = { - [0] = { - .name = "STI", - .start = 0xe0180000, - .end = 0xe0180053, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = 157, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device sti_device = { - .name = "em_sti", - .id = 0, - .resource = sti_resources, - .num_resources = ARRAY_SIZE(sti_resources), + DEFINE_RES_MEM(0xe0180000, 0x54), + DEFINE_RES_IRQ(157), }; +#define emev2_register_sti() \ + platform_device_register_simple("em_sti", 0, \ + sti_resources, \ + ARRAY_SIZE(sti_resources)) /* GIO */ static struct gpio_em_config gio0_config = { @@ -167,36 +105,10 @@ static struct gpio_em_config gio0_config = { }; static struct resource gio0_resources[] = { - [0] = { - .name = "GIO_000", - .start = 0xe0050000, - .end = 0xe005002b, - .flags = IORESOURCE_MEM, - }, - [1] = { - .name = "GIO_000", - .start = 0xe0050040, - .end = 0xe005005f, - .flags = IORESOURCE_MEM, - }, - [2] = { - .start = 99, - .flags = IORESOURCE_IRQ, - }, - [3] = { - .start = 100, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device gio0_device = { - .name = "em_gio", - .id = 0, - .resource = gio0_resources, - .num_resources = ARRAY_SIZE(gio0_resources), - .dev = { - .platform_data = &gio0_config, - }, + DEFINE_RES_MEM(0xe0050000, 0x2c), + DEFINE_RES_MEM(0xe0050040, 0x20), + DEFINE_RES_IRQ(99), + DEFINE_RES_IRQ(100), }; static struct gpio_em_config gio1_config = { @@ -206,36 +118,10 @@ static struct gpio_em_config gio1_config = { }; static struct resource gio1_resources[] = { - [0] = { - .name = "GIO_032", - .start = 0xe0050080, - .end = 0xe00500ab, - .flags = IORESOURCE_MEM, - }, - [1] = { - .name = "GIO_032", - .start = 0xe00500c0, - .end = 0xe00500df, - .flags = IORESOURCE_MEM, - }, - [2] = { - .start = 101, - .flags = IORESOURCE_IRQ, - }, - [3] = { - .start = 102, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device gio1_device = { - .name = "em_gio", - .id = 1, - .resource = gio1_resources, - .num_resources = ARRAY_SIZE(gio1_resources), - .dev = { - .platform_data = &gio1_config, - }, + DEFINE_RES_MEM(0xe0050080, 0x2c), + DEFINE_RES_MEM(0xe00500c0, 0x20), + DEFINE_RES_IRQ(101), + DEFINE_RES_IRQ(102), }; static struct gpio_em_config gio2_config = { @@ -245,36 +131,10 @@ static struct gpio_em_config gio2_config = { }; static struct resource gio2_resources[] = { - [0] = { - .name = "GIO_064", - .start = 0xe0050100, - .end = 0xe005012b, - .flags = IORESOURCE_MEM, - }, - [1] = { - .name = "GIO_064", - .start = 0xe0050140, - .end = 0xe005015f, - .flags = IORESOURCE_MEM, - }, - [2] = { - .start = 103, - .flags = IORESOURCE_IRQ, - }, - [3] = { - .start = 104, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device gio2_device = { - .name = "em_gio", - .id = 2, - .resource = gio2_resources, - .num_resources = ARRAY_SIZE(gio2_resources), - .dev = { - .platform_data = &gio2_config, - }, + DEFINE_RES_MEM(0xe0050100, 0x2c), + DEFINE_RES_MEM(0xe0050140, 0x20), + DEFINE_RES_IRQ(103), + DEFINE_RES_IRQ(104), }; static struct gpio_em_config gio3_config = { @@ -284,36 +144,10 @@ static struct gpio_em_config gio3_config = { }; static struct resource gio3_resources[] = { - [0] = { - .name = "GIO_096", - .start = 0xe0050180, - .end = 0xe00501ab, - .flags = IORESOURCE_MEM, - }, - [1] = { - .name = "GIO_096", - .start = 0xe00501c0, - .end = 0xe00501df, - .flags = IORESOURCE_MEM, - }, - [2] = { - .start = 105, - .flags = IORESOURCE_IRQ, - }, - [3] = { - .start = 106, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device gio3_device = { - .name = "em_gio", - .id = 3, - .resource = gio3_resources, - .num_resources = ARRAY_SIZE(gio3_resources), - .dev = { - .platform_data = &gio3_config, - }, + DEFINE_RES_MEM(0xe0050180, 0x2c), + DEFINE_RES_MEM(0xe00501c0, 0x20), + DEFINE_RES_IRQ(105), + DEFINE_RES_IRQ(106), }; static struct gpio_em_config gio4_config = { @@ -323,77 +157,44 @@ static struct gpio_em_config gio4_config = { }; static struct resource gio4_resources[] = { - [0] = { - .name = "GIO_128", - .start = 0xe0050200, - .end = 0xe005022b, - .flags = IORESOURCE_MEM, - }, - [1] = { - .name = "GIO_128", - .start = 0xe0050240, - .end = 0xe005025f, - .flags = IORESOURCE_MEM, - }, - [2] = { - .start = 107, - .flags = IORESOURCE_IRQ, - }, - [3] = { - .start = 108, - .flags = IORESOURCE_IRQ, - }, + DEFINE_RES_MEM(0xe0050200, 0x2c), + DEFINE_RES_MEM(0xe0050240, 0x20), + DEFINE_RES_IRQ(107), + DEFINE_RES_IRQ(108), }; -static struct platform_device gio4_device = { - .name = "em_gio", - .id = 4, - .resource = gio4_resources, - .num_resources = ARRAY_SIZE(gio4_resources), - .dev = { - .platform_data = &gio4_config, - }, -}; +#define emev2_register_gio(idx) \ + platform_device_register_resndata(&platform_bus, "em_gio", \ + idx, gio##idx##_resources, \ + ARRAY_SIZE(gio##idx##_resources), \ + &gio##idx##_config, \ + sizeof(struct gpio_em_config)) static struct resource pmu_resources[] = { - [0] = { - .start = 152, - .end = 152, - .flags = IORESOURCE_IRQ, - }, - [1] = { - .start = 153, - .end = 153, - .flags = IORESOURCE_IRQ, - }, + DEFINE_RES_IRQ(152), + DEFINE_RES_IRQ(153), }; -static struct platform_device pmu_device = { - .name = "arm-pmu", - .id = -1, - .num_resources = ARRAY_SIZE(pmu_resources), - .resource = pmu_resources, -}; - -static struct platform_device *emev2_devices[] __initdata = { - &uart0_device, - &uart1_device, - &uart2_device, - &uart3_device, - &sti_device, - &gio0_device, - &gio1_device, - &gio2_device, - &gio3_device, - &gio4_device, - &pmu_device, -}; +#define emev2_register_pmu() \ + platform_device_register_simple("arm-pmu", -1, \ + pmu_resources, \ + ARRAY_SIZE(pmu_resources)) void __init emev2_add_standard_devices(void) { emev2_clock_init(); - platform_add_devices(emev2_devices, ARRAY_SIZE(emev2_devices)); + emev2_register_uart(0); + emev2_register_uart(1); + emev2_register_uart(2); + emev2_register_uart(3); + emev2_register_sti(); + emev2_register_gio(0); + emev2_register_gio(1); + emev2_register_gio(2); + emev2_register_gio(3); + emev2_register_gio(4); + emev2_register_pmu(); } void __init emev2_init_delay(void) From 09cb2e366737ac70f1d7c6c0a3747a75c8f90f1e Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Mon, 8 Jul 2013 15:20:05 +0900 Subject: [PATCH 20/33] ARM: shmobile: Fix EMEV2 clock comment typo Update the STI timer frequency comment to 32.768 kHz to fix 37 kHz typo. Signed-off-by: Magnus Damm Signed-off-by: Simon Horman --- arch/arm/mach-shmobile/clock-emev2.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/mach-shmobile/clock-emev2.c b/arch/arm/mach-shmobile/clock-emev2.c index 4710f1847bb7..56dd0cfcddc7 100644 --- a/arch/arm/mach-shmobile/clock-emev2.c +++ b/arch/arm/mach-shmobile/clock-emev2.c @@ -221,7 +221,7 @@ void __init emev2_clock_init(void) smu_base = ioremap(EMEV2_SMU_BASE, PAGE_SIZE); BUG_ON(!smu_base); - /* setup STI timer to run on 37.768 kHz and deassert reset */ + /* setup STI timer to run on 32.768 kHz and deassert reset */ emev2_smu_write(0, STI_CLKSEL); emev2_smu_write(1, STI_RSTCTRL); From 54aa4c48bc0d364565e7d1c722b07314efdc2a10 Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Tue, 9 Jul 2013 01:48:34 -0700 Subject: [PATCH 21/33] ARM: shmobile: r8a7778: remove r8a7778_init_irq() This patch removes r8a7778_init_irq(), since no-one is using it. And now, there is no reason to have r8a7778_init_irq_common(). r8a7778_init_irq_dt() includes it. Signed-off-by: Kuninori Morimoto Acked-by: Magnus Damm Signed-off-by: Simon Horman --- arch/arm/mach-shmobile/include/mach/r8a7778.h | 1 - arch/arm/mach-shmobile/setup-r8a7778.c | 37 +++++-------------- 2 files changed, 9 insertions(+), 29 deletions(-) diff --git a/arch/arm/mach-shmobile/include/mach/r8a7778.h b/arch/arm/mach-shmobile/include/mach/r8a7778.h index 851d027a2f06..9b561bf4229f 100644 --- a/arch/arm/mach-shmobile/include/mach/r8a7778.h +++ b/arch/arm/mach-shmobile/include/mach/r8a7778.h @@ -33,7 +33,6 @@ extern void r8a7778_add_mmc_device(struct sh_mmcif_plat_data *info); extern void r8a7778_init_late(void); extern void r8a7778_init_delay(void); -extern void r8a7778_init_irq(void); extern void r8a7778_init_irq_dt(void); extern void r8a7778_clock_init(void); extern void r8a7778_init_irq_extpin(int irlm); diff --git a/arch/arm/mach-shmobile/setup-r8a7778.c b/arch/arm/mach-shmobile/setup-r8a7778.c index 2a101ebdedf4..a3a2e37b03f3 100644 --- a/arch/arm/mach-shmobile/setup-r8a7778.c +++ b/arch/arm/mach-shmobile/setup-r8a7778.c @@ -408,17 +408,25 @@ void __init r8a7778_init_irq_extpin(int irlm) &irqpin_platform_data, sizeof(irqpin_platform_data)); } +void __init r8a7778_init_delay(void) +{ + shmobile_setup_delay(800, 1, 3); /* Cortex-A9 @ 800MHz */ +} + +#ifdef CONFIG_USE_OF #define INT2SMSKCR0 0x82288 /* 0xfe782288 */ #define INT2SMSKCR1 0x8228c /* 0xfe78228c */ #define INT2NTSR0 0x00018 /* 0xfe700018 */ #define INT2NTSR1 0x0002c /* 0xfe70002c */ -static void __init r8a7778_init_irq_common(void) +void __init r8a7778_init_irq_dt(void) { void __iomem *base = ioremap_nocache(0xfe700000, 0x00100000); BUG_ON(!base); + irqchip_init(); + /* route all interrupts to ARM */ __raw_writel(0x73ffffff, base + INT2NTSR0); __raw_writel(0xffffffff, base + INT2NTSR1); @@ -430,33 +438,6 @@ static void __init r8a7778_init_irq_common(void) iounmap(base); } -void __init r8a7778_init_irq(void) -{ - void __iomem *gic_dist_base; - void __iomem *gic_cpu_base; - - gic_dist_base = ioremap_nocache(0xfe438000, PAGE_SIZE); - gic_cpu_base = ioremap_nocache(0xfe430000, PAGE_SIZE); - BUG_ON(!gic_dist_base || !gic_cpu_base); - - /* use GIC to handle interrupts */ - gic_init(0, 29, gic_dist_base, gic_cpu_base); - - r8a7778_init_irq_common(); -} - -void __init r8a7778_init_delay(void) -{ - shmobile_setup_delay(800, 1, 3); /* Cortex-A9 @ 800MHz */ -} - -#ifdef CONFIG_USE_OF -void __init r8a7778_init_irq_dt(void) -{ - irqchip_init(); - r8a7778_init_irq_common(); -} - static const char *r8a7778_compat_dt[] __initdata = { "renesas,r8a7778", NULL, From ebd9616f439a8a46b9dca9a272b342f34c5f3614 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Tue, 9 Jul 2013 19:40:16 +0900 Subject: [PATCH 22/33] ARM: shmobile: Remove unused mach/dma.h Remove mach-shmobile mach/dma.h since it only seems to be used on non-mach-shmobile platforms. Signed-off-by: Magnus Damm Signed-off-by: Simon Horman --- arch/arm/mach-shmobile/include/mach/dma.h | 1 - 1 file changed, 1 deletion(-) delete mode 100644 arch/arm/mach-shmobile/include/mach/dma.h diff --git a/arch/arm/mach-shmobile/include/mach/dma.h b/arch/arm/mach-shmobile/include/mach/dma.h deleted file mode 100644 index 40a8c178f10d..000000000000 --- a/arch/arm/mach-shmobile/include/mach/dma.h +++ /dev/null @@ -1 +0,0 @@ -/* empty */ From f98c1069bf1748ffa18cbebbc3a9f88dfc19a631 Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Thu, 27 Jun 2013 11:47:57 +0200 Subject: [PATCH 23/33] ARM: shmobile: r8a73a4: add I2C controller DT nodes Add Device Tree nodes for the 9 I2C controllers on r8a73a4, compatible with the i2c-sh_mobile.c driver. Signed-off-by: Guennadi Liakhovetski Acked-by: Kuninori Morimoto Signed-off-by: Simon Horman --- arch/arm/boot/dts/r8a73a4.dtsi | 81 ++++++++++++++++++++++++++++++++++ 1 file changed, 81 insertions(+) diff --git a/arch/arm/boot/dts/r8a73a4.dtsi b/arch/arm/boot/dts/r8a73a4.dtsi index 4ff2019c0e30..4e1ddf0d129c 100644 --- a/arch/arm/boot/dts/r8a73a4.dtsi +++ b/arch/arm/boot/dts/r8a73a4.dtsi @@ -85,4 +85,85 @@ thermal@e61f0000 { interrupt-parent = <&gic>; interrupts = <0 69 4>; }; + + i2c0: i2c@e6500000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,rmobile-iic"; + reg = <0 0xe6500000 0 0x428>; + interrupt-parent = <&gic>; + interrupts = <0 174 0x4>; + }; + + i2c1: i2c@e6510000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,rmobile-iic"; + reg = <0 0xe6510000 0 0x428>; + interrupt-parent = <&gic>; + interrupts = <0 175 0x4>; + }; + + i2c2: i2c@e6520000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,rmobile-iic"; + reg = <0 0xe6520000 0 0x428>; + interrupt-parent = <&gic>; + interrupts = <0 176 0x4>; + }; + + i2c3: i2c@e6530000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,rmobile-iic"; + reg = <0 0xe6530000 0 0x428>; + interrupt-parent = <&gic>; + interrupts = <0 177 0x4>; + }; + + i2c4: i2c@e6540000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,rmobile-iic"; + reg = <0 0xe6540000 0 0x428>; + interrupt-parent = <&gic>; + interrupts = <0 178 0x4>; + }; + + i2c5: i2c@e60b0000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,rmobile-iic"; + reg = <0 0xe60b0000 0 0x428>; + interrupt-parent = <&gic>; + interrupts = <0 179 0x4>; + }; + + i2c6: i2c@e6550000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,rmobile-iic"; + reg = <0 0xe6550000 0 0x428>; + interrupt-parent = <&gic>; + interrupts = <0 184 0x4>; + }; + + i2c7: i2c@e6560000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,rmobile-iic"; + reg = <0 0xe6560000 0 0x428>; + interrupt-parent = <&gic>; + interrupts = <0 185 0x4>; + }; + + i2c8: i2c@e6570000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,rmobile-iic"; + reg = <0 0xe6570000 0 0x428>; + interrupt-parent = <&gic>; + interrupts = <0 173 0x4>; + }; }; From 463a2432a435ea3eda4714626f231b7b22f0ac3d Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Thu, 27 Jun 2013 11:47:58 +0200 Subject: [PATCH 24/33] ARM: shmobile: ape6evm: add CPUFreq support This patch adds OPPs to the CA15 DT node and a max8973 DT node to support clock and voltage scaling, using the cpufreq-cpu0 CPUFreq driver. Signed-off-by: Guennadi Liakhovetski Acked-by: Kuninori Morimoto Signed-off-by: Simon Horman --- arch/arm/boot/dts/r8a73a4-ape6evm.dts | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+) diff --git a/arch/arm/boot/dts/r8a73a4-ape6evm.dts b/arch/arm/boot/dts/r8a73a4-ape6evm.dts index f603c6946c29..e657a9db1666 100644 --- a/arch/arm/boot/dts/r8a73a4-ape6evm.dts +++ b/arch/arm/boot/dts/r8a73a4-ape6evm.dts @@ -50,3 +50,25 @@ ethernet@8000000 { }; }; }; + +&i2c5 { + vdd_dvfs: max8973@1b { + compatible = "maxim,max8973"; + reg = <0x1b>; + + regulator-min-microvolt = <935000>; + regulator-max-microvolt = <1200000>; + regulator-boot-on; + regulator-always-on; + }; +}; + +&cpu0 { + cpu0-supply = <&vdd_dvfs>; + operating-points = < + /* kHz uV */ + 1950000 1115000 + 1462500 995000 + >; + voltage-tolerance = <1>; /* 1% */ +}; From 8f675493f4706a9f92a822121fe38892a08e0161 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Tue, 2 Jul 2013 18:27:41 +0900 Subject: [PATCH 25/33] ARM: shmobile: Update KZM9D dts command line Update the KZM9D DTS command line to remove following cruft: - console=tty0 - no graphic support upstream anyway - earlyprintk= - not supported by the 8250-em driver anyway - mem= - this is provided via DT anyway Signed-off-by: Magnus Damm Acked-by: Arnd Bergmann Signed-off-by: Simon Horman --- arch/arm/boot/dts/emev2-kzm9d.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/emev2-kzm9d.dts b/arch/arm/boot/dts/emev2-kzm9d.dts index b9b3241f173b..dda13bc02f9f 100644 --- a/arch/arm/boot/dts/emev2-kzm9d.dts +++ b/arch/arm/boot/dts/emev2-kzm9d.dts @@ -21,6 +21,6 @@ memory { }; chosen { - bootargs = "console=tty0 console=ttyS1,115200n81 earlyprintk=serial8250-em.1,115200n81 mem=128M@0x40000000 ignore_loglevel root=/dev/nfs ip=dhcp nfsroot=,rsize=4096,wsize=4096"; + bootargs = "console=ttyS1,115200n81 ignore_loglevel root=/dev/nfs ip=dhcp nfsroot=,rsize=4096,wsize=4096"; }; }; From 12d035b13b224ee69886b64fd33d1c1224e79187 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Tue, 2 Jul 2013 18:27:57 +0900 Subject: [PATCH 26/33] ARM: shmobile: Add GIO to EMEV2 dtsi Add GIO0->GIO4 device nodes to the EMEV2 dtsi file. Signed-off-by: Magnus Damm Acked-by: Arnd Bergmann Signed-off-by: Simon Horman --- arch/arm/boot/dts/emev2.dtsi | 59 ++++++++++++++++++++++++++++++++++++ 1 file changed, 59 insertions(+) diff --git a/arch/arm/boot/dts/emev2.dtsi b/arch/arm/boot/dts/emev2.dtsi index c8a8c08b48dd..99ad2b2e8e14 100644 --- a/arch/arm/boot/dts/emev2.dtsi +++ b/arch/arm/boot/dts/emev2.dtsi @@ -14,6 +14,14 @@ / { compatible = "renesas,emev2"; interrupt-parent = <&gic>; + aliases { + gpio0 = &gpio0; + gpio1 = &gpio1; + gpio2 = &gpio2; + gpio3 = &gpio3; + gpio4 = &gpio4; + }; + cpus { #address-cells = <1>; #size-cells = <0>; @@ -67,4 +75,55 @@ uart@e1050000 { reg = <0xe1050000 0x38>; interrupts = <0 11 0>; }; + + gpio0: gpio@e0050000 { + compatible = "renesas,em-gio"; + reg = <0xe0050000 0x2c>, <0xe0050040 0x20>; + interrupts = <0 67 0>, <0 68 0>; + gpio-controller; + #gpio-cells = <2>; + ngpios = <32>; + interrupt-controller; + #interrupt-cells = <2>; + }; + gpio1: gpio@e0050080 { + compatible = "renesas,em-gio"; + reg = <0xe0050080 0x2c>, <0xe00500c0 0x20>; + interrupts = <0 69 0>, <0 70 0>; + gpio-controller; + #gpio-cells = <2>; + ngpios = <32>; + interrupt-controller; + #interrupt-cells = <2>; + }; + gpio2: gpio@e0050100 { + compatible = "renesas,em-gio"; + reg = <0xe0050100 0x2c>, <0xe0050140 0x20>; + interrupts = <0 71 0>, <0 72 0>; + gpio-controller; + #gpio-cells = <2>; + ngpios = <32>; + interrupt-controller; + #interrupt-cells = <2>; + }; + gpio3: gpio@e0050180 { + compatible = "renesas,em-gio"; + reg = <0xe0050180 0x2c>, <0xe00501c0 0x20>; + interrupts = <0 73 0>, <0 74 0>; + gpio-controller; + #gpio-cells = <2>; + ngpios = <32>; + interrupt-controller; + #interrupt-cells = <2>; + }; + gpio4: gpio@e0050200 { + compatible = "renesas,em-gio"; + reg = <0xe0050200 0x2c>, <0xe0050240 0x20>; + interrupts = <0 75 0>, <0 76 0>; + gpio-controller; + #gpio-cells = <2>; + ngpios = <31>; + interrupt-controller; + #interrupt-cells = <2>; + }; }; From 23260e1b417843ea875bd7b21f17c5c80031c4cd Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Tue, 2 Jul 2013 18:28:06 +0900 Subject: [PATCH 27/33] ARM: shmobile: Use DT for GIC on EMEV2 and KZM9D Remove the C version of the EMEV2 GIC setup code, instead rely on GIC information provided by DT. Signed-off-by: Magnus Damm Acked-by: Arnd Bergmann Signed-off-by: Simon Horman --- arch/arm/mach-shmobile/board-kzm9d.c | 2 -- arch/arm/mach-shmobile/include/mach/emev2.h | 1 - arch/arm/mach-shmobile/setup-emev2.c | 15 --------------- 3 files changed, 18 deletions(-) diff --git a/arch/arm/mach-shmobile/board-kzm9d.c b/arch/arm/mach-shmobile/board-kzm9d.c index 15900f1f8af7..30c2cc695b12 100644 --- a/arch/arm/mach-shmobile/board-kzm9d.c +++ b/arch/arm/mach-shmobile/board-kzm9d.c @@ -86,8 +86,6 @@ DT_MACHINE_START(KZM9D_DT, "kzm9d") .smp = smp_ops(emev2_smp_ops), .map_io = emev2_map_io, .init_early = emev2_init_delay, - .nr_irqs = NR_IRQS_LEGACY, - .init_irq = emev2_init_irq, .init_machine = kzm9d_add_standard_devices, .init_late = shmobile_init_late, .dt_compat = kzm9d_boards_compat_dt, diff --git a/arch/arm/mach-shmobile/include/mach/emev2.h b/arch/arm/mach-shmobile/include/mach/emev2.h index 3e0c0441c782..b0ab4b72770a 100644 --- a/arch/arm/mach-shmobile/include/mach/emev2.h +++ b/arch/arm/mach-shmobile/include/mach/emev2.h @@ -2,7 +2,6 @@ #define __ASM_EMEV2_H__ extern void emev2_map_io(void); -extern void emev2_init_irq(void); extern void emev2_init_delay(void); extern void emev2_add_standard_devices(void); extern void emev2_clock_init(void); diff --git a/arch/arm/mach-shmobile/setup-emev2.c b/arch/arm/mach-shmobile/setup-emev2.c index e4b46930db52..6fa485dacc9c 100644 --- a/arch/arm/mach-shmobile/setup-emev2.c +++ b/arch/arm/mach-shmobile/setup-emev2.c @@ -202,20 +202,6 @@ void __init emev2_init_delay(void) shmobile_setup_delay(533, 1, 3); /* Cortex-A9 @ 533MHz */ } -void __init emev2_init_irq(void) -{ - void __iomem *gic_dist_base; - void __iomem *gic_cpu_base; - - /* Static mappings, never released */ - gic_dist_base = ioremap(0xe0028000, PAGE_SIZE); - gic_cpu_base = ioremap(0xe0020000, PAGE_SIZE); - BUG_ON(!gic_dist_base || !gic_cpu_base); - - /* Use GIC to handle interrupts */ - gic_init(0, 29, gic_dist_base, gic_cpu_base); -} - #ifdef CONFIG_USE_OF static const char *emev2_boards_compat_dt[] __initdata = { @@ -226,7 +212,6 @@ static const char *emev2_boards_compat_dt[] __initdata = { DT_MACHINE_START(EMEV2_DT, "Generic Emma Mobile EV2 (Flattened Device Tree)") .smp = smp_ops(emev2_smp_ops), .init_early = emev2_init_delay, - .nr_irqs = NR_IRQS_LEGACY, .dt_compat = emev2_boards_compat_dt, MACHINE_END From 683101a66203149da96e93fb8c0740c726bc114f Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Tue, 2 Jul 2013 18:28:14 +0900 Subject: [PATCH 28/33] ARM: shmobile: Use DT for SMP on EMEV2 and KZM9D Rework the EMEV2 SMP code to rely on DT for CPU information instead of reading out number of CPU cores from the SCU. Signed-off-by: Magnus Damm Acked-by: Arnd Bergmann Signed-off-by: Simon Horman --- arch/arm/mach-shmobile/smp-emev2.c | 17 +++-------------- 1 file changed, 3 insertions(+), 14 deletions(-) diff --git a/arch/arm/mach-shmobile/smp-emev2.c b/arch/arm/mach-shmobile/smp-emev2.c index 80991b35f4ac..97871655b716 100644 --- a/arch/arm/mach-shmobile/smp-emev2.c +++ b/arch/arm/mach-shmobile/smp-emev2.c @@ -38,9 +38,12 @@ static int __cpuinit emev2_boot_secondary(unsigned int cpu, struct task_struct * static void __init emev2_smp_prepare_cpus(unsigned int max_cpus) { + /* setup EMEV2 specific SCU base, enable */ + shmobile_scu_base = ioremap(EMEV2_SCU_BASE, PAGE_SIZE); scu_enable(shmobile_scu_base); /* Tell ROM loader about our vector (in headsmp-scu.S, headsmp.S) */ + emev2_clock_init(); /* need ioremapped SMU */ emev2_set_boot_vector(__pa(shmobile_boot_vector)); shmobile_boot_fn = virt_to_phys(shmobile_boot_scu); shmobile_boot_arg = (unsigned long)shmobile_scu_base; @@ -49,21 +52,7 @@ static void __init emev2_smp_prepare_cpus(unsigned int max_cpus) scu_power_mode(shmobile_scu_base, SCU_PM_NORMAL); } -static void __init emev2_smp_init_cpus(void) -{ - unsigned int ncores; - - /* setup EMEV2 specific SCU base */ - shmobile_scu_base = ioremap(EMEV2_SCU_BASE, PAGE_SIZE); - emev2_clock_init(); /* need ioremapped SMU */ - - ncores = shmobile_scu_base ? scu_get_core_count(shmobile_scu_base) : 1; - - shmobile_smp_init_cpus(ncores); -} - struct smp_operations emev2_smp_ops __initdata = { - .smp_init_cpus = emev2_smp_init_cpus, .smp_prepare_cpus = emev2_smp_prepare_cpus, .smp_boot_secondary = emev2_boot_secondary, }; From 0ea2b5389ab1b63aa880c5735c15be0b26b91b1a Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Tue, 2 Jul 2013 18:28:22 +0900 Subject: [PATCH 29/33] ARM: shmobile: EMEV2 map_io update Update the EMEV2 struct map_desc to exclude the SMU and also include the ->map_io() callback in the DT version of EMEV2 board support. The EMEV2 SMP code can these days perform ioremap() early on without the SMU information in the io_desc[]. To correctly support SMP in case of DT-only board support then the ->map_io() callback is needed. Signed-off-by: Magnus Damm Acked-by: Arnd Bergmann Signed-off-by: Simon Horman --- arch/arm/mach-shmobile/setup-emev2.c | 8 +------- 1 file changed, 1 insertion(+), 7 deletions(-) diff --git a/arch/arm/mach-shmobile/setup-emev2.c b/arch/arm/mach-shmobile/setup-emev2.c index 6fa485dacc9c..19980be7d6a9 100644 --- a/arch/arm/mach-shmobile/setup-emev2.c +++ b/arch/arm/mach-shmobile/setup-emev2.c @@ -38,13 +38,6 @@ static struct map_desc emev2_io_desc[] __initdata = { #ifdef CONFIG_SMP - /* 128K entity map for 0xe0100000 (SMU) */ - { - .virtual = 0xe0100000, - .pfn = __phys_to_pfn(0xe0100000), - .length = SZ_128K, - .type = MT_DEVICE - }, /* 2M mapping for SCU + L2 controller */ { .virtual = 0xf0000000, @@ -211,6 +204,7 @@ static const char *emev2_boards_compat_dt[] __initdata = { DT_MACHINE_START(EMEV2_DT, "Generic Emma Mobile EV2 (Flattened Device Tree)") .smp = smp_ops(emev2_smp_ops), + .map_io = emev2_map_io, .init_early = emev2_init_delay, .dt_compat = emev2_boards_compat_dt, MACHINE_END From 369ee2db438cc0adc6952b424743e9ed21a0edee Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Mon, 8 Jul 2013 17:54:45 +0200 Subject: [PATCH 30/33] ARM: shmobile: r8a73a4: add MMCIF and SDHI DT templates This adds DT templates for all MMCIF and SDHI controllers on r8a73a4. They are added with status="disabled". To use them platform-specific DTs have to enable the required ones. Signed-off-by: Guennadi Liakhovetski Signed-off-by: Simon Horman --- arch/arm/boot/dts/r8a73a4.dtsi | 45 ++++++++++++++++++++++++++++++++++ 1 file changed, 45 insertions(+) diff --git a/arch/arm/boot/dts/r8a73a4.dtsi b/arch/arm/boot/dts/r8a73a4.dtsi index 4e1ddf0d129c..6ce699be6095 100644 --- a/arch/arm/boot/dts/r8a73a4.dtsi +++ b/arch/arm/boot/dts/r8a73a4.dtsi @@ -166,4 +166,49 @@ i2c8: i2c@e6570000 { interrupt-parent = <&gic>; interrupts = <0 173 0x4>; }; + + mmcif0: mmcif@ee200000 { + compatible = "renesas,sh-mmcif"; + reg = <0 0xee200000 0 0x80>; + interrupt-parent = <&gic>; + interrupts = <0 169 0x4>; + reg-io-width = <4>; + status = "disabled"; + }; + + mmcif1: mmcif@ee220000 { + compatible = "renesas,sh-mmcif"; + reg = <0 0xee220000 0 0x80>; + interrupt-parent = <&gic>; + interrupts = <0 170 0x4>; + reg-io-width = <4>; + status = "disabled"; + }; + + sdhi0: sdhi@ee100000 { + compatible = "renesas,r8a73a4-sdhi"; + reg = <0 0xee100000 0 0x100>; + interrupt-parent = <&gic>; + interrupts = <0 165 4>; + cap-sd-highspeed; + status = "disabled"; + }; + + sdhi1: sdhi@ee120000 { + compatible = "renesas,r8a73a4-sdhi"; + reg = <0 0xee120000 0 0x100>; + interrupt-parent = <&gic>; + interrupts = <0 166 4>; + cap-sd-highspeed; + status = "disabled"; + }; + + sdhi2: sdhi@ee140000 { + compatible = "renesas,r8a73a4-sdhi"; + reg = <0 0xee140000 0 0x100>; + interrupt-parent = <&gic>; + interrupts = <0 167 4>; + cap-sd-highspeed; + status = "disabled"; + }; }; From 8c9b1aa41853272adf505cc22be541f1eac2f94c Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Mon, 8 Jul 2013 17:54:46 +0200 Subject: [PATCH 31/33] ARM: shmobile: r8a7790: add MMCIF and SDHI DT templates This adds DT templates for all MMCIF and SDHI controllers on r8a7790. They are added with status="disabled". To use them platform-specific DTs have to enable the required ones. Signed-off-by: Guennadi Liakhovetski Signed-off-by: Simon Horman --- arch/arm/boot/dts/r8a7790.dtsi | 54 ++++++++++++++++++++++++++++++++++ 1 file changed, 54 insertions(+) diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi index 339d9b11721c..9cd882028095 100644 --- a/arch/arm/boot/dts/r8a7790.dtsi +++ b/arch/arm/boot/dts/r8a7790.dtsi @@ -54,4 +54,58 @@ irqc0: interrupt-controller@e61c0000 { interrupt-parent = <&gic>; interrupts = <0 0 4>, <0 1 4>, <0 2 4>, <0 3 4>; }; + + mmcif0: mmcif@ee200000 { + compatible = "renesas,sh-mmcif"; + reg = <0 0xee200000 0 0x80>; + interrupt-parent = <&gic>; + interrupts = <0 169 0x4>; + reg-io-width = <4>; + status = "disabled"; + }; + + mmcif1: mmcif@ee220000 { + compatible = "renesas,sh-mmcif"; + reg = <0 0xee220000 0 0x80>; + interrupt-parent = <&gic>; + interrupts = <0 170 0x4>; + reg-io-width = <4>; + status = "disabled"; + }; + + sdhi0: sdhi@ee100000 { + compatible = "renesas,r8a7790-sdhi"; + reg = <0 0xee100000 0 0x100>; + interrupt-parent = <&gic>; + interrupts = <0 165 4>; + cap-sd-highspeed; + status = "disabled"; + }; + + sdhi1: sdhi@ee120000 { + compatible = "renesas,r8a7790-sdhi"; + reg = <0 0xee120000 0 0x100>; + interrupt-parent = <&gic>; + interrupts = <0 166 4>; + cap-sd-highspeed; + status = "disabled"; + }; + + sdhi2: sdhi@ee140000 { + compatible = "renesas,r8a7790-sdhi"; + reg = <0 0xee140000 0 0x100>; + interrupt-parent = <&gic>; + interrupts = <0 167 4>; + cap-sd-highspeed; + status = "disabled"; + }; + + sdhi3: sdhi@ee160000 { + compatible = "renesas,r8a7790-sdhi"; + reg = <0 0xee160000 0 0x100>; + interrupt-parent = <&gic>; + interrupts = <0 168 4>; + cap-sd-highspeed; + status = "disabled"; + }; }; From 03393e8fe651aaf8824c519effbb51bf460ca57f Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Mon, 8 Jul 2013 15:00:30 +0900 Subject: [PATCH 32/33] ARM: shmobile: KZM9D DT reference implementation Add a DT reference implementation for the KZM9D board. Only DT devices are used in this case. UART, STI, GPIO and SMP / GIC are all provided by emev2.dtsi. There is still a board specific C file used for enabling legacy SH clocks. This file will be removed after we have moved over to common clocks. Signed-off-by: Magnus Damm [horms+renesas@verge.net.au: Do not include trailing blank line in board-kzm9d-reference.c ] Signed-off-by: Simon Horman --- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/emev2-kzm9d-reference.dts | 26 +++++++++++ arch/arm/mach-shmobile/Kconfig | 12 +++++ arch/arm/mach-shmobile/Makefile | 1 + arch/arm/mach-shmobile/Makefile.boot | 1 + .../arm/mach-shmobile/board-kzm9d-reference.c | 46 +++++++++++++++++++ 6 files changed, 87 insertions(+) create mode 100644 arch/arm/boot/dts/emev2-kzm9d-reference.dts create mode 100644 arch/arm/mach-shmobile/board-kzm9d-reference.c diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 641b3c9a7028..af19e38f8e97 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -183,6 +183,7 @@ dtb-$(CONFIG_ARCH_U8500) += snowball.dtb \ ccu9540.dtb dtb-$(CONFIG_ARCH_S3C24XX) += s3c2416-smdk2416.dtb dtb-$(CONFIG_ARCH_SHMOBILE) += emev2-kzm9d.dtb \ + emev2-kzm9d-reference.dtb \ r8a7740-armadillo800eva.dtb \ r8a7778-bockw.dtb \ r8a7740-armadillo800eva-reference.dtb \ diff --git a/arch/arm/boot/dts/emev2-kzm9d-reference.dts b/arch/arm/boot/dts/emev2-kzm9d-reference.dts new file mode 100644 index 000000000000..5ec065eda2e3 --- /dev/null +++ b/arch/arm/boot/dts/emev2-kzm9d-reference.dts @@ -0,0 +1,26 @@ +/* + * Device Tree Source for the KZM9D board + * + * Copyright (C) 2013 Renesas Solutions Corp. + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ +/dts-v1/; + +/include/ "emev2.dtsi" + +/ { + model = "EMEV2 KZM9D Board"; + compatible = "renesas,kzm9d-reference", "renesas,emev2"; + + memory { + device_type = "memory"; + reg = <0x40000000 0x8000000>; + }; + + chosen { + bootargs = "console=ttyS1,115200n81 ignore_loglevel root=/dev/nfs ip=dhcp nfsroot=,rsize=4096,wsize=4096"; + }; +}; diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig index 3912ce91fee4..7c5034aa1fe3 100644 --- a/arch/arm/mach-shmobile/Kconfig +++ b/arch/arm/mach-shmobile/Kconfig @@ -156,6 +156,18 @@ config MACH_KZM9D select REGULATOR_FIXED_VOLTAGE if REGULATOR select USE_OF +config MACH_KZM9D_REFERENCE + bool "KZM9D board - Reference Device Tree Implementation" + depends on ARCH_EMEV2 + select REGULATOR_FIXED_VOLTAGE if REGULATOR + select USE_OF + ---help--- + Use reference implementation of KZM9D board support + which makes a greater use of device tree at the expense + of not supporting a number of devices. + + This is intended to aid developers + config MACH_KZM9G bool "KZM-A9-GT board" depends on ARCH_SH73A0 diff --git a/arch/arm/mach-shmobile/Makefile b/arch/arm/mach-shmobile/Makefile index 6165a517f580..e8d0a2c904a0 100644 --- a/arch/arm/mach-shmobile/Makefile +++ b/arch/arm/mach-shmobile/Makefile @@ -46,6 +46,7 @@ obj-$(CONFIG_MACH_LAGER) += board-lager.o obj-$(CONFIG_MACH_ARMADILLO800EVA) += board-armadillo800eva.o obj-$(CONFIG_MACH_ARMADILLO800EVA_REFERENCE) += board-armadillo800eva-reference.o obj-$(CONFIG_MACH_KZM9D) += board-kzm9d.o +obj-$(CONFIG_MACH_KZM9D_REFERENCE) += board-kzm9d-reference.o obj-$(CONFIG_MACH_KZM9G) += board-kzm9g.o obj-$(CONFIG_MACH_KZM9G_REFERENCE) += board-kzm9g-reference.o diff --git a/arch/arm/mach-shmobile/Makefile.boot b/arch/arm/mach-shmobile/Makefile.boot index 84c6868580f0..7785c52b5cfd 100644 --- a/arch/arm/mach-shmobile/Makefile.boot +++ b/arch/arm/mach-shmobile/Makefile.boot @@ -7,6 +7,7 @@ loadaddr-$(CONFIG_MACH_ARMADILLO800EVA_REFERENCE) += 0x40008000 loadaddr-$(CONFIG_MACH_BOCKW) += 0x60008000 loadaddr-$(CONFIG_MACH_KOTA2) += 0x41008000 loadaddr-$(CONFIG_MACH_KZM9D) += 0x40008000 +loadaddr-$(CONFIG_MACH_KZM9D_REFERENCE) += 0x40008000 loadaddr-$(CONFIG_MACH_KZM9G) += 0x41008000 loadaddr-$(CONFIG_MACH_KZM9G_REFERENCE) += 0x41008000 loadaddr-$(CONFIG_MACH_LAGER) += 0x40008000 diff --git a/arch/arm/mach-shmobile/board-kzm9d-reference.c b/arch/arm/mach-shmobile/board-kzm9d-reference.c new file mode 100644 index 000000000000..a7b28b24ab38 --- /dev/null +++ b/arch/arm/mach-shmobile/board-kzm9d-reference.c @@ -0,0 +1,46 @@ +/* + * kzm9d board support - Reference DT implementation + * + * Copyright (C) 2013 Renesas Solutions Corp. + * Copyright (C) 2013 Magnus Damm + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include +#include +#include +#include +#include + +static void __init kzm9d_add_standard_devices(void) +{ + emev2_clock_init(); + + of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); +} + +static const char *kzm9d_boards_compat_dt[] __initdata = { + "renesas,kzm9d-reference", + NULL, +}; + +DT_MACHINE_START(KZM9D_DT, "kzm9d") + .smp = smp_ops(emev2_smp_ops), + .map_io = emev2_map_io, + .init_early = emev2_init_delay, + .init_machine = kzm9d_add_standard_devices, + .init_late = shmobile_init_late, + .dt_compat = kzm9d_boards_compat_dt, +MACHINE_END From 66a5cab04d339d02b93a4671eadf8e251dbfdc2c Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Tue, 9 Jul 2013 13:26:54 +0900 Subject: [PATCH 33/33] ARM: shmobile: Add SMSC ethernet chip to KZM9D DT reference Add support for the SMSC ethernet controller found on the KZM9D board to the KZM9D DT Reference code. Signed-off-by: Magnus Damm Signed-off-by: Simon Horman --- arch/arm/boot/dts/emev2-kzm9d-reference.dts | 31 +++++++++++++++++++++ 1 file changed, 31 insertions(+) diff --git a/arch/arm/boot/dts/emev2-kzm9d-reference.dts b/arch/arm/boot/dts/emev2-kzm9d-reference.dts index 5ec065eda2e3..bed676b95c27 100644 --- a/arch/arm/boot/dts/emev2-kzm9d-reference.dts +++ b/arch/arm/boot/dts/emev2-kzm9d-reference.dts @@ -23,4 +23,35 @@ memory { chosen { bootargs = "console=ttyS1,115200n81 ignore_loglevel root=/dev/nfs ip=dhcp nfsroot=,rsize=4096,wsize=4096"; }; + + reg_1p8v: regulator@0 { + compatible = "regulator-fixed"; + regulator-name = "fixed-1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + reg_3p3v: regulator@1 { + compatible = "regulator-fixed"; + regulator-name = "fixed-3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + }; + + lan9220@20000000 { + compatible = "smsc,lan9220", "smsc,lan9115"; + reg = <0x20000000 0x10000>; + phy-mode = "mii"; + interrupt-parent = <&gpio0>; + interrupts = <1 1>; /* active high */ + reg-io-width = <4>; + smsc,irq-active-high; + smsc,irq-push-pull; + vddvario-supply = <®_1p8v>; + vdd33a-supply = <®_3p3v>; + }; };