From 902806baf3c1e8383c1fe3ff0b6042b8cb5c2707 Mon Sep 17 00:00:00 2001 From: Stefan Ekenberg Date: Tue, 19 Nov 2024 08:40:29 +0100 Subject: [PATCH 1/4] drm/bridge: adv7511_audio: Update Audio InfoFrame properly AUDIO_UPDATE bit (Bit 5 of MAIN register 0x4A) needs to be set to 1 while updating Audio InfoFrame information and then set to 0 when done. Otherwise partially updated Audio InfoFrames could be sent out. Two cases where this rule were not followed are fixed: - In adv7511_hdmi_hw_params() make sure AUDIO_UPDATE bit is updated before/after setting ADV7511_REG_AUDIO_INFOFRAME. - In audio_startup() use the correct register for clearing AUDIO_UPDATE bit. The problem with corrupted audio infoframes were discovered by letting a HDMI logic analyser check the output of ADV7535. Note that this patchs replaces writing REG_GC(1) with REG_INFOFRAME_UPDATE. Bit 5 of REG_GC(1) is positioned within field GC_PP[3:0] and that field doesn't control audio infoframe and is read- only. My conclusion therefore was that the author if this code meant to clear bit 5 of REG_INFOFRAME_UPDATE from the very beginning. Tested-by: Biju Das Fixes: 53c515befe28 ("drm/bridge: adv7511: Add Audio support") Signed-off-by: Stefan Ekenberg Reviewed-by: Dmitry Baryshkov Link: https://patchwork.freedesktop.org/patch/msgid/20241119-adv7511-audio-info-frame-v4-1-4ae68e76c89c@axis.com Signed-off-by: Dmitry Baryshkov --- drivers/gpu/drm/bridge/adv7511/adv7511_audio.c | 14 ++++++++++++-- 1 file changed, 12 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/bridge/adv7511/adv7511_audio.c b/drivers/gpu/drm/bridge/adv7511/adv7511_audio.c index 61f4a38e7d2b..8f786592143b 100644 --- a/drivers/gpu/drm/bridge/adv7511/adv7511_audio.c +++ b/drivers/gpu/drm/bridge/adv7511/adv7511_audio.c @@ -153,7 +153,16 @@ static int adv7511_hdmi_hw_params(struct device *dev, void *data, ADV7511_AUDIO_CFG3_LEN_MASK, len); regmap_update_bits(adv7511->regmap, ADV7511_REG_I2C_FREQ_ID_CFG, ADV7511_I2C_FREQ_ID_CFG_RATE_MASK, rate << 4); - regmap_write(adv7511->regmap, 0x73, 0x1); + + /* send current Audio infoframe values while updating */ + regmap_update_bits(adv7511->regmap, ADV7511_REG_INFOFRAME_UPDATE, + BIT(5), BIT(5)); + + regmap_write(adv7511->regmap, ADV7511_REG_AUDIO_INFOFRAME(0), 0x1); + + /* use Audio infoframe updated info */ + regmap_update_bits(adv7511->regmap, ADV7511_REG_INFOFRAME_UPDATE, + BIT(5), 0); return 0; } @@ -184,8 +193,9 @@ static int audio_startup(struct device *dev, void *data) regmap_update_bits(adv7511->regmap, ADV7511_REG_GC(0), BIT(7) | BIT(6), BIT(7)); /* use Audio infoframe updated info */ - regmap_update_bits(adv7511->regmap, ADV7511_REG_GC(1), + regmap_update_bits(adv7511->regmap, ADV7511_REG_INFOFRAME_UPDATE, BIT(5), 0); + /* enable SPDIF receiver */ if (adv7511->audio_source == ADV7511_AUDIO_SOURCE_SPDIF) regmap_update_bits(adv7511->regmap, ADV7511_REG_AUDIO_CONFIG, From 81adbd3ff21c1182e06aa02c6be0bfd9ea02d8e8 Mon Sep 17 00:00:00 2001 From: Biju Das Date: Tue, 19 Nov 2024 19:20:29 +0000 Subject: [PATCH 2/4] drm: adv7511: Fix use-after-free in adv7533_attach_dsi() MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The host_node pointer was assigned and freed in adv7533_parse_dt(), and later, adv7533_attach_dsi() uses the same. Fix this use-after-free issue by dropping of_node_put() in adv7533_parse_dt() and calling of_node_put() in error path of probe() and also in the remove(). Fixes: 1e4d58cd7f88 ("drm/bridge: adv7533: Create a MIPI DSI device") Cc: stable@vger.kernel.org Reviewed-by: Laurent Pinchart Signed-off-by: Biju Das Link: https://patchwork.freedesktop.org/patch/msgid/20241119192040.152657-2-biju.das.jz@bp.renesas.com Signed-off-by: Dmitry Baryshkov --- drivers/gpu/drm/bridge/adv7511/adv7511_drv.c | 10 ++++++++-- drivers/gpu/drm/bridge/adv7511/adv7533.c | 2 -- 2 files changed, 8 insertions(+), 4 deletions(-) diff --git a/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c b/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c index eb5919b38263..a13b3d8ab6ac 100644 --- a/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c +++ b/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c @@ -1241,8 +1241,10 @@ static int adv7511_probe(struct i2c_client *i2c) return ret; ret = adv7511_init_regulators(adv7511); - if (ret) - return dev_err_probe(dev, ret, "failed to init regulators\n"); + if (ret) { + dev_err_probe(dev, ret, "failed to init regulators\n"); + goto err_of_node_put; + } /* * The power down GPIO is optional. If present, toggle it from active to @@ -1363,6 +1365,8 @@ static int adv7511_probe(struct i2c_client *i2c) i2c_unregister_device(adv7511->i2c_edid); uninit_regulators: adv7511_uninit_regulators(adv7511); +err_of_node_put: + of_node_put(adv7511->host_node); return ret; } @@ -1371,6 +1375,8 @@ static void adv7511_remove(struct i2c_client *i2c) { struct adv7511 *adv7511 = i2c_get_clientdata(i2c); + of_node_put(adv7511->host_node); + adv7511_uninit_regulators(adv7511); drm_bridge_remove(&adv7511->bridge); diff --git a/drivers/gpu/drm/bridge/adv7511/adv7533.c b/drivers/gpu/drm/bridge/adv7511/adv7533.c index 4481489aaf5e..5f195e91b3e6 100644 --- a/drivers/gpu/drm/bridge/adv7511/adv7533.c +++ b/drivers/gpu/drm/bridge/adv7511/adv7533.c @@ -181,8 +181,6 @@ int adv7533_parse_dt(struct device_node *np, struct adv7511 *adv) if (!adv->host_node) return -ENODEV; - of_node_put(adv->host_node); - adv->use_timing_gen = !of_property_read_bool(np, "adi,disable-timing-generator"); From ee8f9ed57a397605434caeef351bafa3ec4dfdd4 Mon Sep 17 00:00:00 2001 From: Biju Das Date: Tue, 19 Nov 2024 19:20:30 +0000 Subject: [PATCH 3/4] dt-bindings: display: adi,adv7533: Drop single lane support As per [1] and [2], ADV7535/7533 supports only 2-, 3-, or 4-lane. Drop unsupported 1-lane from bindings. [1] https://www.analog.com/media/en/technical-documentation/data-sheets/ADV7535.pdf [2] https://www.analog.com/media/en/technical-documentation/data-sheets/ADV7533.pdf Fixes: 1e4d58cd7f88 ("drm/bridge: adv7533: Create a MIPI DSI device") Cc: stable@vger.kernel.org Acked-by: Krzysztof Kozlowski Reviewed-by: Geert Uytterhoeven Reviewed-by: Laurent Pinchart Signed-off-by: Biju Das Link: https://patchwork.freedesktop.org/patch/msgid/20241119192040.152657-3-biju.das.jz@bp.renesas.com Signed-off-by: Dmitry Baryshkov --- .../devicetree/bindings/display/bridge/adi,adv7533.yaml | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Documentation/devicetree/bindings/display/bridge/adi,adv7533.yaml b/Documentation/devicetree/bindings/display/bridge/adi,adv7533.yaml index df20a3c9c744..ec89115c74e4 100644 --- a/Documentation/devicetree/bindings/display/bridge/adi,adv7533.yaml +++ b/Documentation/devicetree/bindings/display/bridge/adi,adv7533.yaml @@ -90,7 +90,7 @@ properties: adi,dsi-lanes: description: Number of DSI data lanes connected to the DSI host. $ref: /schemas/types.yaml#/definitions/uint32 - enum: [ 1, 2, 3, 4 ] + enum: [ 2, 3, 4 ] "#sound-dai-cells": const: 0 From 79d67c499c3f886202a40c5cb27e747e4fa4d738 Mon Sep 17 00:00:00 2001 From: Biju Das Date: Tue, 19 Nov 2024 19:20:31 +0000 Subject: [PATCH 4/4] drm: adv7511: Drop dsi single lane support As per [1] and [2], ADV7535/7533 supports only 2-, 3-, or 4-lane. Drop unsupported 1-lane. [1] https://www.analog.com/media/en/technical-documentation/data-sheets/ADV7535.pdf [2] https://www.analog.com/media/en/technical-documentation/data-sheets/ADV7533.pdf Fixes: 1e4d58cd7f88 ("drm/bridge: adv7533: Create a MIPI DSI device") Reported-by: Hien Huynh Cc: stable@vger.kernel.org Reviewed-by: Laurent Pinchart Reviewed-by: Adam Ford Signed-off-by: Biju Das Link: https://patchwork.freedesktop.org/patch/msgid/20241119192040.152657-4-biju.das.jz@bp.renesas.com Signed-off-by: Dmitry Baryshkov --- drivers/gpu/drm/bridge/adv7511/adv7533.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/bridge/adv7511/adv7533.c b/drivers/gpu/drm/bridge/adv7511/adv7533.c index 5f195e91b3e6..122ad91e8a32 100644 --- a/drivers/gpu/drm/bridge/adv7511/adv7533.c +++ b/drivers/gpu/drm/bridge/adv7511/adv7533.c @@ -172,7 +172,7 @@ int adv7533_parse_dt(struct device_node *np, struct adv7511 *adv) of_property_read_u32(np, "adi,dsi-lanes", &num_lanes); - if (num_lanes < 1 || num_lanes > 4) + if (num_lanes < 2 || num_lanes > 4) return -EINVAL; adv->num_dsi_lanes = num_lanes;