mirror of
https://github.com/torvalds/linux.git
synced 2026-05-28 09:04:39 +02:00
arm64: dts: qcom: sm8250-samsung-r8q: Move common parts to dtsi
Move common parts of the device tree to a separate dtsi in preparation for adding other Samsung devices from the S20, Tab S7 or Note 20 families, creating sm8250-samsung-common.dtsi. Also add support for UFS, USB and GPIO keys. Signed-off-by: Eric Gonçalves <ghatto404@gmail.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Link: https://lore.kernel.org/r/20250905190931.27481-2-ghatto404@gmail.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
This commit is contained in:
Eric Gonçalves
Bjorn Andersson
parent
473a19211c
commit
194c7636fa
204
arch/arm64/boot/dts/qcom/sm8250-samsung-common.dtsi
Normal file
204
arch/arm64/boot/dts/qcom/sm8250-samsung-common.dtsi
Normal file
|
|
@ -0,0 +1,204 @@
|
|||
// SPDX-License-Identifier: GPL-2.0-only
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
|
||||
#include "sm8250.dtsi"
|
||||
#include "pm8150.dtsi"
|
||||
|
||||
/ {
|
||||
chosen {
|
||||
#address-cells = <2>;
|
||||
#size-cells = <2>;
|
||||
ranges;
|
||||
|
||||
framebuffer: framebuffer@9c000000 {
|
||||
compatible = "simple-framebuffer";
|
||||
reg = <0x0 0x9c000000 0x0 0x2300000>;
|
||||
width = <1080>;
|
||||
height = <2400>;
|
||||
stride = <(1080 * 4)>;
|
||||
format = "a8r8g8b8";
|
||||
};
|
||||
};
|
||||
|
||||
gpio_keys: gpio-keys {
|
||||
compatible = "gpio-keys";
|
||||
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&vol_up_n>;
|
||||
|
||||
key-vol-up {
|
||||
label = "Volume Up";
|
||||
gpios = <&pm8150_gpios 3 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_VOLUMEUP>;
|
||||
debounce-interval = <15>;
|
||||
linux,can-disable;
|
||||
wakeup-source;
|
||||
};
|
||||
};
|
||||
|
||||
reserved-memory {
|
||||
cont_splash_mem: memory@9c000000 {
|
||||
reg = <0x0 0x9c000000 0x0 0x2300000>;
|
||||
no-map;
|
||||
};
|
||||
|
||||
ramoops@9fa00000 {
|
||||
compatible = "ramoops";
|
||||
reg = <0x0 0x9fa00000 0x0 0x100000>;
|
||||
record-size = <0x4000>;
|
||||
console-size = <0x40000>;
|
||||
ftrace-size = <0x40000>;
|
||||
pmsg-size = <0x40000>;
|
||||
no-map;
|
||||
};
|
||||
};
|
||||
|
||||
vph_pwr: vph-pwr-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vph_pwr";
|
||||
regulator-min-microvolt = <3700000>;
|
||||
regulator-max-microvolt = <3700000>;
|
||||
};
|
||||
};
|
||||
|
||||
&apps_rsc {
|
||||
regulators-0 {
|
||||
compatible = "qcom,pm8150-rpmh-regulators";
|
||||
qcom,pmic-id = "a";
|
||||
|
||||
vdd-s1-supply = <&vph_pwr>;
|
||||
vdd-s2-supply = <&vph_pwr>;
|
||||
vdd-s3-supply = <&vph_pwr>;
|
||||
vdd-s4-supply = <&vph_pwr>;
|
||||
vdd-s5-supply = <&vph_pwr>;
|
||||
vdd-s6-supply = <&vph_pwr>;
|
||||
vdd-s7-supply = <&vph_pwr>;
|
||||
vdd-s8-supply = <&vph_pwr>;
|
||||
vdd-s9-supply = <&vph_pwr>;
|
||||
vdd-s10-supply = <&vph_pwr>;
|
||||
|
||||
vreg_s4a_1p8: smps4 {
|
||||
regulator-name = "vreg_s4a_1p8";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1920000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
regulator-allow-set-load;
|
||||
regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
|
||||
RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l2a_3p1: ldo2 {
|
||||
regulator-name = "vreg_l2a_3p1";
|
||||
regulator-min-microvolt = <3072000>;
|
||||
regulator-max-microvolt = <3072000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l5a_0p88: ldo5 {
|
||||
regulator-name = "vreg_l5a_0p88";
|
||||
regulator-min-microvolt = <880000>;
|
||||
regulator-max-microvolt = <880000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l6a_1p2: ldo6 {
|
||||
regulator-name = "vreg_l6a_1p2";
|
||||
regulator-min-microvolt = <1200000>;
|
||||
regulator-max-microvolt = <1200000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
regulator-allow-set-load;
|
||||
regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
|
||||
RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l9a_1p2: ldo9 {
|
||||
regulator-name = "vreg_l9a_1p2";
|
||||
regulator-min-microvolt = <1200000>;
|
||||
regulator-max-microvolt = <1200000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l12a_1p8: ldo12 {
|
||||
regulator-name = "vreg_l12a_1p8";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l17a_3p0: ldo17 {
|
||||
regulator-name = "vreg_l17a_3p0";
|
||||
regulator-min-microvolt = <2496000>;
|
||||
regulator-max-microvolt = <3008000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
regulator-allow-set-load;
|
||||
regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
|
||||
RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pm8150_gpios {
|
||||
vol_up_n: vol-up-n-state {
|
||||
pins = "gpio3";
|
||||
function = "normal";
|
||||
power-source = <0>;
|
||||
input-enable;
|
||||
bias-pull-up;
|
||||
};
|
||||
};
|
||||
|
||||
&pon_pwrkey {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pon_resin {
|
||||
linux,code = <KEY_VOLUMEDOWN>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&tlmm {
|
||||
gpio-reserved-ranges = <40 4>; /* I2C (Unused) */
|
||||
};
|
||||
|
||||
&usb_1 {
|
||||
/* Limit to USB 2.0 for now */
|
||||
qcom,select-utmi-as-pipe-clk;
|
||||
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_1_dwc3 {
|
||||
dr_mode = "peripheral";
|
||||
maximum-speed = "high-speed";
|
||||
/* Remove USB3 phy */
|
||||
phys = <&usb_1_hsphy>;
|
||||
phy-names = "usb2-phy";
|
||||
};
|
||||
|
||||
&usb_1_hsphy {
|
||||
vdda-pll-supply = <&vreg_l5a_0p88>;
|
||||
vdda18-supply = <&vreg_l12a_1p8>;
|
||||
vdda33-supply = <&vreg_l2a_3p1>;
|
||||
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&ufs_mem_hc {
|
||||
vcc-supply = <&vreg_l17a_3p0>;
|
||||
vcc-max-microamp = <800000>;
|
||||
vccq-supply = <&vreg_l6a_1p2>;
|
||||
vccq-max-microamp = <800000>;
|
||||
vccq2-supply = <&vreg_s4a_1p8>;
|
||||
vccq2-max-microamp = <800000>;
|
||||
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&ufs_mem_phy {
|
||||
vdda-phy-supply = <&vreg_l5a_0p88>;
|
||||
vdda-pll-supply = <&vreg_l9a_1p2>;
|
||||
|
||||
status = "okay";
|
||||
};
|
||||
|
|
@ -2,46 +2,25 @@
|
|||
|
||||
/dts-v1/;
|
||||
|
||||
#include "sm8250.dtsi"
|
||||
#include "sm8250-samsung-common.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Samsung Galaxy S20 FE";
|
||||
compatible = "samsung,r8q", "qcom,sm8250";
|
||||
chassis-type = "handset";
|
||||
|
||||
chosen {
|
||||
#address-cells = <2>;
|
||||
#size-cells = <2>;
|
||||
ranges;
|
||||
|
||||
framebuffer: framebuffer@9c000000 {
|
||||
compatible = "simple-framebuffer";
|
||||
reg = <0x0 0x9c000000 0x0 (1080 * 2400 * 4)>;
|
||||
width = <1080>;
|
||||
height = <2400>;
|
||||
stride = <(1080 * 4)>;
|
||||
format = "a8r8g8b8";
|
||||
};
|
||||
};
|
||||
|
||||
reserved-memory {
|
||||
cont_splash_mem: memory@9c000000 {
|
||||
reg = <0x0 0x9c000000 0x0 (1080 * 2400 * 4)>;
|
||||
no-map;
|
||||
};
|
||||
|
||||
ramoops@9fa00000 {
|
||||
compatible = "ramoops";
|
||||
reg = <0x0 0x9fa00000 0x0 0x100000>;
|
||||
record-size = <0x4000>;
|
||||
console-size = <0x40000>;
|
||||
pmsg-size = <0x40000>;
|
||||
ecc-size = <16>;
|
||||
no-map;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&tlmm {
|
||||
gpio-reserved-ranges = <40 4>; /* I2C (not linked to anything) */
|
||||
&adsp {
|
||||
firmware-name = "qcom/sm8250/Samsung/r8q/adsp.mbn";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&cdsp {
|
||||
firmware-name = "qcom/sm8250/Samsung/r8q/cdsp.mbn";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&slpi {
|
||||
firmware-name = "qcom/sm8250/Samsung/r8q/slpi.mbn";
|
||||
status = "okay";
|
||||
};
|
||||
|
|
|
|||
Loading…
Reference in New Issue
Block a user