From 1704b0462220beabda1ddb4b386e1295defa39fd Mon Sep 17 00:00:00 2001 From: Paresh Bhagat Date: Tue, 8 Jul 2025 14:28:36 +0530 Subject: [PATCH] arm64: dts: ti: Add bootph property to nodes at source for am62a Add bootph property directly into the original definitions of relevant nodes (e.g., power domains, USB controllers, and other peripherals) within their respective DTSI files (ex. main, mcu, and wakeup) for am62a. By defining bootph in the nodes source definitions instead of appending it later in final DTS files, this change ensures that the property is inherently present wherever the nodes are reused across derived device trees. Signed-off-by: Paresh Bhagat Reviewed-by: Bryan Brattlof Link: https://lore.kernel.org/r/20250708085839.1498505-2-p-bhagat@ti.com Signed-off-by: Vignesh Raghavendra --- arch/arm64/boot/dts/ti/k3-am62a-main.dtsi | 13 +++++++++++++ arch/arm64/boot/dts/ti/k3-am62a-wakeup.dtsi | 2 ++ 2 files changed, 15 insertions(+) diff --git a/arch/arm64/boot/dts/ti/k3-am62a-main.dtsi b/arch/arm64/boot/dts/ti/k3-am62a-main.dtsi index 63e097ddf988..44e7e459f176 100644 --- a/arch/arm64/boot/dts/ti/k3-am62a-main.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am62a-main.dtsi @@ -51,6 +51,7 @@ phy_gmii_sel: phy@4044 { compatible = "ti,am654-phy-gmii-sel"; reg = <0x4044 0x8>; #phy-cells = <1>; + bootph-all; }; epwm_tbclk: clock-controller@4130 { @@ -96,6 +97,7 @@ secure_proxy_main: mailbox@4d000000 { #mbox-cells = <1>; interrupt-names = "rx_012"; interrupts = ; + bootph-all; }; inta_main_dmss: interrupt-controller@48000000 { @@ -131,6 +133,7 @@ main_bcdma: dma-controller@485c0100 { ti,sci-rm-range-bchan = <0x20>; /* BLOCK_COPY_CHAN */ ti,sci-rm-range-rchan = <0x21>; /* SPLIT_TR_RX_CHAN */ ti,sci-rm-range-tchan = <0x22>; /* SPLIT_TR_TX_CHAN */ + bootph-all; }; main_pktdma: dma-controller@485c0000 { @@ -147,6 +150,8 @@ main_pktdma: dma-controller@485c0000 { "ring", "tchan", "rchan", "rflow"; msi-parent = <&inta_main_dmss>; #dma-cells = <2>; + bootph-all; + ti,sci = <&dmsc>; ti,sci-dev-id = <30>; ti,sci-rm-range-tchan = <0x23>, /* UNMAPPED_TX_CHAN */ @@ -220,16 +225,19 @@ dmsc: system-controller@44043000 { k3_pds: power-controller { compatible = "ti,sci-pm-domain"; #power-domain-cells = <2>; + bootph-all; }; k3_clks: clock-controller { compatible = "ti,k2g-sci-clk"; #clock-cells = <2>; + bootph-all; }; k3_reset: reset-controller { compatible = "ti,sci-reset"; #reset-cells = <2>; + bootph-all; }; }; @@ -254,6 +262,7 @@ secure_proxy_sa3: mailbox@43600000 { * firmware on non-MPU processors */ status = "disabled"; + bootph-all; }; main_pmx0: pinctrl@f4000 { @@ -282,6 +291,7 @@ main_timer0: timer@2400000 { assigned-clock-parents = <&k3_clks 36 3>; power-domains = <&k3_pds 36 TI_SCI_PD_EXCLUSIVE>; ti,timer-pwm; + bootph-all; }; main_timer1: timer@2410000 { @@ -651,6 +661,7 @@ usb0: usb@31000000 { interrupt-names = "host", "peripheral"; maximum-speed = "high-speed"; dr_mode = "otg"; + bootph-all; snps,usb2-gadget-lpm-disable; snps,usb2-lpm-disable; }; @@ -745,6 +756,7 @@ cpsw_port1: port@1 { phys = <&phy_gmii_sel 1>; mac-address = [00 00 00 00 00 00]; ti,syscon-efuse = <&cpsw_mac_syscon 0x0>; + bootph-all; }; cpsw_port2: port@2 { @@ -764,6 +776,7 @@ cpsw3g_mdio: mdio@f00 { clocks = <&k3_clks 13 0>; clock-names = "fck"; bus_freq = <1000000>; + bootph-all; }; cpts@3d000 { diff --git a/arch/arm64/boot/dts/ti/k3-am62a-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-am62a-wakeup.dtsi index 259ae6ebbfb5..9ef1c829a9df 100644 --- a/arch/arm64/boot/dts/ti/k3-am62a-wakeup.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am62a-wakeup.dtsi @@ -17,6 +17,7 @@ wkup_conf: bus@43000000 { chipid: chipid@14 { compatible = "ti,am654-chipid"; reg = <0x14 0x4>; + bootph-all; }; opp_efuse_table: syscon@18 { @@ -67,6 +68,7 @@ wkup_uart0: serial@0 { reg = <0 0x100>; interrupts = ; status = "disabled"; + bootph-pre-ram; }; };