mirror of
https://github.com/torvalds/linux.git
synced 2026-06-03 03:53:37 +02:00
ARM: dts: ti: omap: samsung-espresso10: Add initial support for Galaxy Tab 2 10.1
Create a device tree for the 10 inch variants (P5100, P5110, P5113) Signed-off-by: Mithil Bavishi <bavishimithil@gmail.com> Reviewed-by: Andreas Kemnade <andreas@kemnade.info> Link: https://patch.msgid.link/20260303203017.511-9-bavishimithil@gmail.com Signed-off-by: Kevin Hilman <khilman@baylibre.com>
This commit is contained in:
parent
f1bf8f5335
commit
16dcd2c753
|
|
@ -81,6 +81,7 @@ dtb-$(CONFIG_ARCH_OMAP4) += \
|
|||
omap4-var-dvk-om44.dtb \
|
||||
omap4-var-stk-om44.dtb \
|
||||
omap4-samsung-espresso7.dtb \
|
||||
omap4-samsung-espresso10.dtb \
|
||||
omap4-xyboard-mz609.dtb \
|
||||
omap4-xyboard-mz617.dtb
|
||||
dtb-$(CONFIG_SOC_AM33XX) += \
|
||||
|
|
|
|||
101
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dts
Normal file
101
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dts
Normal file
|
|
@ -0,0 +1,101 @@
|
|||
// SPDX-License-Identifier: (GPL-2.0 OR MIT)
|
||||
/dts-v1/;
|
||||
|
||||
#include "omap4-samsung-espresso-common.dtsi"
|
||||
#include <dt-bindings/power/summit,smb347-charger.h>
|
||||
/ {
|
||||
model = "Samsung Galaxy Tab 2 (10 inch)";
|
||||
compatible = "samsung,espresso10", "ti,omap4430", "ti,omap4";
|
||||
|
||||
i2c-gpio5 {
|
||||
smb347: charger@6 {
|
||||
compatible = "summit,smb347";
|
||||
reg = <0x6>; // 0x0C >> 1
|
||||
interrupt-parent = <&gpio2>;
|
||||
interrupts = <0 IRQ_TYPE_EDGE_BOTH>;
|
||||
|
||||
summit,enable-usb-charging;
|
||||
summit,enable-charge-control = <SMB3XX_CHG_ENABLE_SW>;
|
||||
summit,chip-temperature-threshold-celsius = <120>;
|
||||
summit,usb-current-limit-microamp = <1800000>;
|
||||
};
|
||||
};
|
||||
|
||||
backlight: backlight {
|
||||
compatible = "pwm-backlight";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&backlight_pins>;
|
||||
pwms = <&pwm10 0 1600 0>;
|
||||
power-supply = <®_lcd>;
|
||||
enable-gpios = <&gpio3 31 GPIO_ACTIVE_HIGH>;
|
||||
brightness-levels = <0 4 8 16 32 64 128 255>;
|
||||
default-brightness-level = <7>;
|
||||
};
|
||||
|
||||
panel {
|
||||
compatible = "samsung,ltn101al03", "panel-lvds";
|
||||
power-supply = <®_lcd>;
|
||||
width-mm = <223>;
|
||||
height-mm = <125>;
|
||||
data-mapping = "vesa-24";
|
||||
backlight = <&backlight>;
|
||||
|
||||
panel-timing {
|
||||
clock-frequency = <69818000>;
|
||||
|
||||
hback-porch = <64>;
|
||||
hactive = <1280>;
|
||||
hfront-porch = <16>;
|
||||
hsync-len = <48>;
|
||||
|
||||
vback-porch = <11>;
|
||||
vactive = <800>;
|
||||
vfront-porch = <16>;
|
||||
vsync-len = <3>;
|
||||
|
||||
hsync-active = <0>;
|
||||
vsync-active = <0>;
|
||||
de-active = <1>;
|
||||
pixelclk-active = <1>;
|
||||
};
|
||||
|
||||
port {
|
||||
panel_in: endpoint {
|
||||
remote-endpoint = <&bridge_out>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&i2c3 {
|
||||
touchscreen@20 {
|
||||
compatible = "syna,rmi4-i2c";
|
||||
reg = <0x20>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
interrupt-parent = <&gpio2>;
|
||||
interrupts = <14 IRQ_TYPE_EDGE_FALLING>;
|
||||
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&touch_pins>;
|
||||
|
||||
//avdd-supply = <®_touch_ldo_en>;
|
||||
vdd-supply = <&ldo6>;
|
||||
|
||||
syna,reset-delay-ms = <200>;
|
||||
syna,startup-delay-ms = <200>;
|
||||
|
||||
rmi4-f01@1 {
|
||||
reg = <0x01>;
|
||||
syna,nosleep-mode = <1>;
|
||||
};
|
||||
|
||||
rmi4-f11@11 {
|
||||
reg = <0x11>;
|
||||
touchscreen-size-x = <1280>;
|
||||
touchscreen-size-y = <800>;
|
||||
syna,sensor-type = <1>;
|
||||
};
|
||||
};
|
||||
};
|
||||
Loading…
Reference in New Issue
Block a user