dt-bindings: display: panel: document Sharp LQ079L1SX01 panel

Document Sharp LQ079L1SX01 panel found in Xiaomi Mi Pad.

Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250919153839.236241-2-clamor95@gmail.com

Documentation/devicetree/bindings/display/panel/sharp,lq079l1sx01.yaml

@@ -0,0 +1,99 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/sharp,lq079l1sx01.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sharp Microelectronics 7.9" WQXGA TFT LCD panel
+
+maintainers:
+  - Svyatoslav Ryhel <clamor95@gmail.com>
+
+description: >
+  This panel requires a dual-channel DSI host to operate and it supports
+  only left-right split mode, where each channel drives the left or right
+  half of the screen and only video mode.
+
+  Each of the DSI channels controls a separate DSI peripheral.
+  The peripheral driven by the first link (DSI-LINK1), left one, is
+  considered the primary peripheral and controls the device.
+
+allOf:
+  - $ref: panel-common-dual.yaml#
+
+properties:
+  compatible:
+    const: sharp,lq079l1sx01
+
+  reg:
+    maxItems: 1
+
+  avdd-supply:
+    description: regulator that supplies the analog voltage
+
+  vddio-supply:
+    description: regulator that supplies the I/O voltage
+
+  vsp-supply:
+    description: positive boost supply regulator
+
+  vsn-supply:
+    description: negative boost supply regulator
+
+  reset-gpios:
+    maxItems: 1
+
+  backlight: true
+  ports: true
+
+required:
+  - compatible
+  - reg
+  - avdd-supply
+  - vddio-supply
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    dsi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        panel@0 {
+            compatible = "sharp,lq079l1sx01";
+            reg = <0>;
+
+            reset-gpios = <&gpio 59 GPIO_ACTIVE_LOW>;
+
+            avdd-supply = <&avdd_lcd>;
+            vddio-supply = <&vdd_lcd_io>;
+            vsp-supply = <&vsp_5v5_lcd>;
+            vsn-supply = <&vsn_5v5_lcd>;
+
+            backlight = <&backlight>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    panel_in0: endpoint {
+                        remote-endpoint = <&dsi0_out>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    panel_in1: endpoint {
+                        remote-endpoint = <&dsi1_out>;
+                    };
+                };
+            };
+        };
+    };
+...