drm/amd/display: Enable dc mode clock switching for DCN32x

- DC mode clock switch interface was previously only executed
  for DCN303. Enable it for DCN32x so that the interface is called
  correctly
- Assign function pointers for DCN32x that are used in the dc mode
  interface
- Update the dc mode interface to work generically for each ASIC
- In update_clocks, make sure to consider softmax if we're in DC mode

Reviewed-by: Jun Lei <jun.lei@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drivers/gpu/drm/amd/display/dc/clk_mgr/dcn32/dcn32_clk_mgr.c

@@ -541,9 +541,18 @@ static void dcn32_update_clocks(struct clk_mgr *clk_mgr_base,
 			clk_mgr_base->clks.p_state_change_support = p_state_change_support;
 
 			/* to disable P-State switching, set UCLK min = max */
-			if (!clk_mgr_base->clks.p_state_change_support)
-				dcn32_smu_set_hard_min_by_freq(clk_mgr, PPCLK_UCLK,
-						clk_mgr_base->bw_params->clk_table.entries[clk_mgr_base->bw_params->clk_table.num_entries_per_clk.num_memclk_levels - 1].memclk_mhz);
+			if (!clk_mgr_base->clks.p_state_change_support) {
+				if (dc->clk_mgr->dc_mode_softmax_enabled) {
+					/* On DCN32x we will never have the functional UCLK min above the softmax
+					 * since we calculate mode support based on softmax being the max UCLK
+					 * frequency.
+					 */
+					dcn32_smu_set_hard_min_by_freq(clk_mgr, PPCLK_UCLK,
+							dc->clk_mgr->bw_params->dc_mode_softmax_memclk);
+				} else {
+					dcn32_smu_set_hard_min_by_freq(clk_mgr, PPCLK_UCLK, dc->clk_mgr->bw_params->max_memclk_mhz);
+				}
+			}
 		}
 
 		/* Always update saved value, even if new value not set due to P-State switching unsupported. Also check safe_to_lower for FCLK */
@@ -808,8 +817,7 @@ static void dcn32_set_hard_max_memclk(struct clk_mgr *clk_mgr_base)
 	if (!clk_mgr->smu_present)
 		return;
 
-	dcn30_smu_set_hard_max_by_freq(clk_mgr, PPCLK_UCLK,
-			clk_mgr_base->bw_params->clk_table.entries[clk_mgr_base->bw_params->clk_table.num_entries_per_clk.num_memclk_levels - 1].memclk_mhz);
+	dcn30_smu_set_hard_max_by_freq(clk_mgr, PPCLK_UCLK, clk_mgr_base->bw_params->max_memclk_mhz);
 }
 
 /* Get current memclk states, update bounding box */
@@ -827,6 +835,7 @@ static void dcn32_get_memclk_states_from_smu(struct clk_mgr *clk_mgr_base)
 			&clk_mgr_base->bw_params->clk_table.entries[0].memclk_mhz,
 			&num_entries_per_clk->num_memclk_levels);
 	clk_mgr_base->bw_params->dc_mode_limit.memclk_mhz = dcn30_smu_get_dc_mode_max_dpm_freq(clk_mgr, PPCLK_UCLK);
+	clk_mgr_base->bw_params->dc_mode_softmax_memclk = clk_mgr_base->bw_params->dc_mode_limit.memclk_mhz;
 
 	/* memclk must have at least one level */
 	num_entries_per_clk->num_memclk_levels = num_entries_per_clk->num_memclk_levels ? num_entries_per_clk->num_memclk_levels : 1;
@@ -841,7 +850,8 @@ static void dcn32_get_memclk_states_from_smu(struct clk_mgr *clk_mgr_base)
 	} else {
 		num_levels = num_entries_per_clk->num_fclk_levels;
 	}
-
+	clk_mgr_base->bw_params->max_memclk_mhz =
+			clk_mgr_base->bw_params->clk_table.entries[num_entries_per_clk->num_memclk_levels - 1].memclk_mhz;
 	clk_mgr_base->bw_params->clk_table.num_entries = num_levels ? num_levels : 1;
 
 	if (clk_mgr->dpm_present && !num_levels)
@@ -894,6 +904,25 @@ static bool dcn32_is_smu_present(struct clk_mgr *clk_mgr_base)
 	return clk_mgr->smu_present;
 }
 
+static void dcn32_set_max_memclk(struct clk_mgr *clk_mgr_base, unsigned int memclk_mhz)
+{
+	struct clk_mgr_internal *clk_mgr = TO_CLK_MGR_INTERNAL(clk_mgr_base);
+
+	if (!clk_mgr->smu_present)
+		return;
+
+	dcn30_smu_set_hard_max_by_freq(clk_mgr, PPCLK_UCLK, memclk_mhz);
+}
+
+static void dcn32_set_min_memclk(struct clk_mgr *clk_mgr_base, unsigned int memclk_mhz)
+{
+	struct clk_mgr_internal *clk_mgr = TO_CLK_MGR_INTERNAL(clk_mgr_base);
+
+	if (!clk_mgr->smu_present)
+		return;
+
+	dcn32_smu_set_hard_min_by_freq(clk_mgr, PPCLK_UCLK, memclk_mhz);
+}
 
 static struct clk_mgr_funcs dcn32_funcs = {
 		.get_dp_ref_clk_frequency = dce12_get_dp_ref_freq_khz,
@@ -904,6 +933,8 @@ static struct clk_mgr_funcs dcn32_funcs = {
 		.notify_wm_ranges = dcn32_notify_wm_ranges,
 		.set_hard_min_memclk = dcn32_set_hard_min_memclk,
 		.set_hard_max_memclk = dcn32_set_hard_max_memclk,
+		.set_max_memclk = dcn32_set_max_memclk,
+		.set_min_memclk = dcn32_set_min_memclk,
 		.get_memclk_states_from_smu = dcn32_get_memclk_states_from_smu,
 		.are_clock_states_equal = dcn32_are_clock_states_equal,
 		.enable_pme_wa = dcn32_enable_pme_wa,

drivers/gpu/drm/amd/display/dc/core/dc.c

@@ -4763,15 +4763,17 @@ static void blank_and_force_memclk(struct dc *dc, bool apply, unsigned int memcl
  */
 void dc_enable_dcmode_clk_limit(struct dc *dc, bool enable)
 {
-	uint32_t hw_internal_rev = dc->ctx->asic_id.hw_internal_rev;
-	unsigned int softMax, maxDPM, funcMin;
+	unsigned int softMax = 0, maxDPM = 0, funcMin = 0, i;
 	bool p_state_change_support;
 
-	if (!ASICREV_IS_BEIGE_GOBY_P(hw_internal_rev))
+	if (!dc->config.dc_mode_clk_limit_support)
 		return;
 
 	softMax = dc->clk_mgr->bw_params->dc_mode_softmax_memclk;
-	maxDPM = dc->clk_mgr->bw_params->clk_table.entries[dc->clk_mgr->bw_params->clk_table.num_entries - 1].memclk_mhz;
+	for (i = 0; i < dc->clk_mgr->bw_params->clk_table.num_entries; i++) {
+		if (dc->clk_mgr->bw_params->clk_table.entries[i].memclk_mhz > maxDPM)
+			maxDPM = dc->clk_mgr->bw_params->clk_table.entries[i].memclk_mhz;
+	}
 	funcMin = (dc->clk_mgr->clks.dramclk_khz + 999) / 1000;
 	p_state_change_support = dc->clk_mgr->clks.p_state_change_support;
 

drivers/gpu/drm/amd/display/dc/dc.h

@@ -416,7 +416,7 @@ struct dc_config {
 	uint8_t force_bios_fixed_vs;
 	int sdpif_request_limit_words_per_umc;
 	bool use_old_fixed_vs_sequence;
-	bool disable_subvp_drr;
+	bool dc_mode_clk_limit_support;
 };
 
 enum visual_confirm {

drivers/gpu/drm/amd/display/dc/dcn303/dcn303_resource.c

@@ -1190,6 +1190,7 @@ static bool dcn303_resource_construct(
 
 	dc->caps.dp_hdmi21_pcon_support = true;
 
+	dc->config.dc_mode_clk_limit_support = true;
 	/* read VBIOS LTTPR caps */
 	if (ctx->dc_bios->funcs->get_lttpr_caps) {
 		enum bp_result bp_query_result;

drivers/gpu/drm/amd/display/dc/dcn32/dcn32_hubp.c

@@ -179,6 +179,7 @@ static struct hubp_funcs dcn32_hubp_funcs = {
 	.hubp_setup_interdependent = hubp2_setup_interdependent,
 	.hubp_set_vm_system_aperture_settings = hubp3_set_vm_system_aperture_settings,
 	.set_blank = hubp2_set_blank,
+	.set_blank_regs = hubp2_set_blank_regs,
 	.dcc_control = hubp3_dcc_control,
 	.mem_program_viewport = min_set_viewport,
 	.set_cursor_attributes	= hubp32_cursor_set_attributes,

drivers/gpu/drm/amd/display/dc/dcn32/dcn32_init.c

@@ -56,6 +56,7 @@ static const struct hw_sequencer_funcs dcn32_funcs = {
 	.enable_audio_stream = dce110_enable_audio_stream,
 	.disable_audio_stream = dce110_disable_audio_stream,
 	.disable_plane = dcn20_disable_plane,
+	.disable_pixel_data = dcn20_disable_pixel_data,
 	.pipe_control_lock = dcn20_pipe_control_lock,
 	.interdependent_update_lock = dcn10_lock_all_pipes,
 	.cursor_lock = dcn10_cursor_lock,

drivers/gpu/drm/amd/display/dc/dcn32/dcn32_resource.c

@@ -2215,6 +2215,7 @@ static bool dcn32_resource_construct(
 	/* Use pipe context based otg sync logic */
 	dc->config.use_pipe_ctx_sync_logic = true;
 
+	dc->config.dc_mode_clk_limit_support = true;
 	/* read VBIOS LTTPR caps */
 	{
 		if (ctx->dc_bios->funcs->get_lttpr_caps) {

drivers/gpu/drm/amd/display/dc/dcn321/dcn321_resource.c

@@ -1756,6 +1756,7 @@ static bool dcn321_resource_construct(
 	dc->caps.color.mpc.ogam_rom_caps.hlg = 0;
 	dc->caps.color.mpc.ocsc = 1;
 
+	dc->config.dc_mode_clk_limit_support = true;
 	/* read VBIOS LTTPR caps */
 	{
 		if (ctx->dc_bios->funcs->get_lttpr_caps) {

drivers/gpu/drm/amd/display/dc/inc/hw/clk_mgr.h

@@ -230,6 +230,7 @@ struct clk_bw_params {
 	unsigned int dram_channel_width_bytes;
  	unsigned int dispclk_vco_khz;
 	unsigned int dc_mode_softmax_memclk;
+	unsigned int max_memclk_mhz;
 	struct clk_limit_table clk_table;
 	struct wm_table wm_table;
 	struct dummy_pstate_entry dummy_pstate_table[4];