diff --git a/MAINTAINERS b/MAINTAINERS
index 00e7b26e0a23..7a57275ac4ba 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1900,6 +1900,13 @@ S:	Supported
 W:	https://ez.analog.com/linux-software-drivers
 F:	drivers/dma/dma-axi-dmac.c
 
+ANALOG DEVICES INC ETHERNET PHY DRIVERS
+M:	Ciprian Regus <ciprian.regus@analog.com>
+L:	netdev@vger.kernel.org
+S:	Maintained
+W:	https://ez.analog.com/linux-software-drivers
+F:	drivers/net/phy/adin1140-phy.c
+
 ANALOG DEVICES INC IIO DRIVERS
 M:	Nuno Sá <nuno.sa@analog.com>
 M:	Michael Hennerich <Michael.Hennerich@analog.com>
diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig
index 099f25dceabb..a29d3fed8a05 100644
--- a/drivers/net/phy/Kconfig
+++ b/drivers/net/phy/Kconfig
@@ -136,6 +136,12 @@ config ADIN1100_PHY
 	  Currently supports the:
 	  - ADIN1100 - Robust,Industrial, Low Power 10BASE-T1L Ethernet PHY
 
+config ADIN1140_PHY
+	tristate "Analog Devices ADIN1140 10BASE-T1S PHY"
+	help
+	  Adds support for the Analog Devices, Inc. ADIN1140's internal
+	  10BASE-T1S PHY.
+
 config AMCC_QT2025_PHY
 	tristate "AMCC QT2025 PHY"
 	depends on RUST_PHYLIB_ABSTRACTIONS
diff --git a/drivers/net/phy/Makefile b/drivers/net/phy/Makefile
index de660ae94945..e23df5e836e9 100644
--- a/drivers/net/phy/Makefile
+++ b/drivers/net/phy/Makefile
@@ -29,6 +29,7 @@ obj-y				+= $(sfp-obj-y) $(sfp-obj-m)
 
 obj-$(CONFIG_ADIN_PHY)		+= adin.o
 obj-$(CONFIG_ADIN1100_PHY)	+= adin1100.o
+obj-$(CONFIG_ADIN1140_PHY)	+= adin1140-phy.o
 obj-$(CONFIG_AIR_AN8801_PHY)	+= air_an8801.o
 obj-$(CONFIG_AIR_EN8811H_PHY)   += air_en8811h.o
 obj-$(CONFIG_AIR_NET_PHYLIB)	+= air_phy_lib.o
diff --git a/drivers/net/phy/adin1140-phy.c b/drivers/net/phy/adin1140-phy.c
new file mode 100644
index 000000000000..d35da4ad680d
--- /dev/null
+++ b/drivers/net/phy/adin1140-phy.c
@@ -0,0 +1,72 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Driver for Analog Devices, Inc. ADIN1140 10BASE-T1S PHY
+ *
+ * Copyright 2026 Analog Devices Inc.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/phy.h>
+
+#define ADIN1140_PHY_ID		0x0283be00
+
+#define ADIN1140_PCS_CTRL		0x08f3
+#define ADIN1140_PCS_CTRL_LOOPBACK	BIT(14)
+
+static int adin1140_config_aneg(struct phy_device *phydev)
+{
+	/* phylib tries to clear BIT(12) in MDIO_CTRL1, since AN is disabled.
+	 * However, on the ADIN1140, that field is non-standard, being used
+	 * to control the reset status of the PHY (thus it needs to remain set).
+	 */
+	return 0;
+}
+
+static int adin1140_loopback(struct phy_device *phydev, bool enable, int speed)
+{
+	if (enable && speed)
+		return -EOPNOTSUPP;
+
+	return phy_modify_mmd(phydev, MDIO_MMD_PCS, ADIN1140_PCS_CTRL,
+			      ADIN1140_PCS_CTRL_LOOPBACK,
+			      enable ? ADIN1140_PCS_CTRL_LOOPBACK : 0);
+}
+
+static int adin1140_read_status(struct phy_device *phydev)
+{
+	phydev->link = 1;
+	phydev->duplex = DUPLEX_HALF;
+	phydev->speed = SPEED_10;
+	phydev->autoneg = AUTONEG_DISABLE;
+
+	return 0;
+}
+
+static struct phy_driver adin1140_driver[] = {
+	{
+		PHY_ID_MATCH_EXACT(ADIN1140_PHY_ID),
+		.name = "ADIN1140_PHY",
+		.features = PHY_BASIC_T1S_P2MP_FEATURES,
+		.read_status = adin1140_read_status,
+		.config_aneg = adin1140_config_aneg,
+		.set_loopback = adin1140_loopback,
+		.read_mmd = genphy_read_mmd_c45,
+		.write_mmd = genphy_write_mmd_c45,
+		.get_plca_cfg = genphy_c45_plca_get_cfg,
+		.set_plca_cfg = genphy_c45_plca_set_cfg,
+		.get_plca_status = genphy_c45_plca_get_status,
+	},
+};
+module_phy_driver(adin1140_driver);
+
+static const struct mdio_device_id __maybe_unused adin1140_tbl[] = {
+	{ PHY_ID_MATCH_EXACT(ADIN1140_PHY_ID) },
+	{ }
+};
+
+MODULE_DEVICE_TABLE(mdio, adin1140_tbl);
+
+MODULE_DESCRIPTION("Analog Devices, Inc. ADIN1140 10BASE-T1S PHY");
+MODULE_AUTHOR("Ciprian Regus <ciprian.regus@analog.com>");
+MODULE_LICENSE("GPL");