From 0d42e2c0bd6ceb89e44c6e065f9bdf9b1df3ef0c Mon Sep 17 00:00:00 2001 From: David Carlier Date: Tue, 14 Apr 2026 13:30:06 +0100 Subject: [PATCH] iio: adc: npcm: fix unbalanced clk_disable_unprepare() The driver acquired the ADC clock with devm_clk_get() and read its rate, but never called clk_prepare_enable(). The probe error path and npcm_adc_remove() both called clk_disable_unprepare() unconditionally, causing the clk framework's enable/prepare counts to underflow on probe failure or module unbind. The issue went unnoticed because NPCM BMC firmware leaves the ADC clock enabled at boot, so the driver happened to work in practice. Switch to devm_clk_get_enabled() so the clock is properly enabled during probe and automatically released by the device-managed cleanup, and drop the now-redundant clk_disable_unprepare() from both the probe error path and remove(). While at it, drop the duplicate error message on devm_request_irq() failure since the IRQ core already logs it. Fixes: 9bf85fbc9d8f ("iio: adc: add NPCM ADC driver") Signed-off-by: David Carlier Reviewed-by: Andy Shevchenko Cc: Signed-off-by: Jonathan Cameron --- drivers/iio/adc/npcm_adc.c | 25 ++++++++----------------- 1 file changed, 8 insertions(+), 17 deletions(-) diff --git a/drivers/iio/adc/npcm_adc.c b/drivers/iio/adc/npcm_adc.c index ddabb9600d46..61c8b825bda1 100644 --- a/drivers/iio/adc/npcm_adc.c +++ b/drivers/iio/adc/npcm_adc.c @@ -231,7 +231,7 @@ static int npcm_adc_probe(struct platform_device *pdev) if (IS_ERR(info->reset)) return PTR_ERR(info->reset); - info->adc_clk = devm_clk_get(&pdev->dev, NULL); + info->adc_clk = devm_clk_get_enabled(&pdev->dev, NULL); if (IS_ERR(info->adc_clk)) { dev_warn(&pdev->dev, "ADC clock failed: can't read clk\n"); return PTR_ERR(info->adc_clk); @@ -244,17 +244,13 @@ static int npcm_adc_probe(struct platform_device *pdev) info->adc_sample_hz = clk_get_rate(info->adc_clk) / ((div + 1) * 2); irq = platform_get_irq(pdev, 0); - if (irq < 0) { - ret = irq; - goto err_disable_clk; - } + if (irq < 0) + return irq; ret = devm_request_irq(&pdev->dev, irq, npcm_adc_isr, 0, "NPCM_ADC", indio_dev); - if (ret < 0) { - dev_err(dev, "failed requesting interrupt\n"); - goto err_disable_clk; - } + if (ret < 0) + return ret; reg_con = ioread32(info->regs + NPCM_ADCCON); info->vref = devm_regulator_get_optional(&pdev->dev, "vref"); @@ -262,7 +258,7 @@ static int npcm_adc_probe(struct platform_device *pdev) ret = regulator_enable(info->vref); if (ret) { dev_err(&pdev->dev, "Can't enable ADC reference voltage\n"); - goto err_disable_clk; + return ret; } iowrite32(reg_con & ~NPCM_ADCCON_REFSEL, @@ -272,10 +268,8 @@ static int npcm_adc_probe(struct platform_device *pdev) * Any error which is not ENODEV indicates the regulator * has been specified and so is a failure case. */ - if (PTR_ERR(info->vref) != -ENODEV) { - ret = PTR_ERR(info->vref); - goto err_disable_clk; - } + if (PTR_ERR(info->vref) != -ENODEV) + return PTR_ERR(info->vref); /* Use internal reference */ iowrite32(reg_con | NPCM_ADCCON_REFSEL, @@ -314,8 +308,6 @@ static int npcm_adc_probe(struct platform_device *pdev) iowrite32(reg_con & ~NPCM_ADCCON_ADC_EN, info->regs + NPCM_ADCCON); if (!IS_ERR(info->vref)) regulator_disable(info->vref); -err_disable_clk: - clk_disable_unprepare(info->adc_clk); return ret; } @@ -332,7 +324,6 @@ static void npcm_adc_remove(struct platform_device *pdev) iowrite32(regtemp & ~NPCM_ADCCON_ADC_EN, info->regs + NPCM_ADCCON); if (!IS_ERR(info->vref)) regulator_disable(info->vref); - clk_disable_unprepare(info->adc_clk); } static struct platform_driver npcm_adc_driver = {