diff --git a/arch/arm64/boot/dts/freescale/imx8mp-var-som-symphony.dts b/arch/arm64/boot/dts/freescale/imx8mp-var-som-symphony.dts index 93dee9ec0b9b..e928a3d44b1d 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-var-som-symphony.dts +++ b/arch/arm64/boot/dts/freescale/imx8mp-var-som-symphony.dts @@ -66,6 +66,16 @@ pcie0_refclk: pcie0-refclk { clock-frequency = <100000000>; }; + reg_fec_phy: regulator-fec-phy { + compatible = "regulator-fixed"; + regulator-name = "fec-phy"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-enable-ramp-delay = <20000>; + gpio = <&pca9534 7 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + reg_usdhc2_vmmc: regulator-usdhc2-vmmc { compatible = "regulator-fixed"; regulator-name = "VSD_3V3"; @@ -106,6 +116,33 @@ &ecspi2 { status = "okay"; }; +&eqos { + mdio { + ethphy1: ethernet-phy@5 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <5>; + reset-gpios = <&pca9534 5 GPIO_ACTIVE_LOW>; + reset-assert-us = <10000>; + reset-deassert-us = <20000>; + vddio-supply = <®_phy_vddio>; + }; + }; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec>; + /* + * The required RGMII TX and RX 2ns delays are implemented directly + * in hardware via passive delay elements on the SOM PCB. + * No delay configuration is needed in software via PHY driver. + */ + phy-mode = "rgmii"; + phy-handle = <ðphy1>; + phy-supply = <®_fec_phy>; + status = "okay"; +}; + &flexcan2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_flexcan2>; @@ -363,6 +400,23 @@ MX8MP_IOMUXC_ECSPI2_SS0__GPIO5_IO13 0x12 >; }; + pinctrl_fec: fecgrp { + fsl,pins = < + MX8MP_IOMUXC_SAI1_RXD4__ENET1_RGMII_RD0 0x90 + MX8MP_IOMUXC_SAI1_RXD5__ENET1_RGMII_RD1 0x90 + MX8MP_IOMUXC_SAI1_RXD6__ENET1_RGMII_RD2 0x90 + MX8MP_IOMUXC_SAI1_RXD7__ENET1_RGMII_RD3 0x90 + MX8MP_IOMUXC_SAI1_TXC__ENET1_RGMII_RXC 0x90 + MX8MP_IOMUXC_SAI1_TXFS__ENET1_RGMII_RX_CTL 0x90 + MX8MP_IOMUXC_SAI1_TXD0__ENET1_RGMII_TD0 0x00 + MX8MP_IOMUXC_SAI1_TXD1__ENET1_RGMII_TD1 0x00 + MX8MP_IOMUXC_SAI1_TXD2__ENET1_RGMII_TD2 0x00 + MX8MP_IOMUXC_SAI1_TXD3__ENET1_RGMII_TD3 0x00 + MX8MP_IOMUXC_SAI1_TXD4__ENET1_RGMII_TX_CTL 0x00 + MX8MP_IOMUXC_SAI1_TXD5__ENET1_RGMII_TXC 0x00 + >; + }; + pinctrl_flexcan2: flexcan2grp { fsl,pins = < MX8MP_IOMUXC_UART3_RXD__CAN2_TX 0x154