mirror of
https://github.com/torvalds/linux.git
synced 2026-05-26 08:02:27 +02:00
arm64: dts: qcom: msm8916-wiko-chuppito: add initial devicetree
Add an initial device tree for Wiko PULP 4G. Includes support for: - UART - USB (no OTG) - Internal storage - MicroSD - Volume keys + Power button - Touchscreen - Backlight - Accelerometer: Invensense MPU6880 - Magnetometer: Asahi Kasei AK09911 - Hall sensor: Rohm BU52021HFV - Proximity sensor - Vibrator - Earpiece - Microphone 1 - Headphones - Wifi - Bluetooth - GPU Signed-off-by: Paul Adam <adamp@posteo.de> Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Link: https://lore.kernel.org/r/20260311-wiko-chuppito-v5-3-0a8656cca1b3@posteo.de Signed-off-by: Bjorn Andersson <andersson@kernel.org>
This commit is contained in:
Paul Adam
Bjorn Andersson
parent
598e1f16d8
commit
0b63fb8c3e
|
|
@ -90,6 +90,7 @@ dtb-$(CONFIG_ARCH_QCOM) += msm8916-samsung-rossa.dtb
|
|||
dtb-$(CONFIG_ARCH_QCOM) += msm8916-samsung-serranove.dtb
|
||||
dtb-$(CONFIG_ARCH_QCOM) += msm8916-thwc-uf896.dtb
|
||||
dtb-$(CONFIG_ARCH_QCOM) += msm8916-thwc-ufi001c.dtb
|
||||
dtb-$(CONFIG_ARCH_QCOM) += msm8916-wiko-chuppito.dtb
|
||||
dtb-$(CONFIG_ARCH_QCOM) += msm8916-wingtech-wt86518.dtb
|
||||
dtb-$(CONFIG_ARCH_QCOM) += msm8916-wingtech-wt86528.dtb
|
||||
dtb-$(CONFIG_ARCH_QCOM) += msm8916-wingtech-wt88047.dtb
|
||||
|
|
|
|||
314
arch/arm64/boot/dts/qcom/msm8916-wiko-chuppito.dts
Normal file
314
arch/arm64/boot/dts/qcom/msm8916-wiko-chuppito.dts
Normal file
|
|
@ -0,0 +1,314 @@
|
|||
// SPDX-License-Identifier: GPL-2.0-only
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include "msm8916-pm8916.dtsi"
|
||||
#include "msm8916-modem-qdsp6.dtsi"
|
||||
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/input/input.h>
|
||||
#include <dt-bindings/pinctrl/qcom,pmic-mpp.h>
|
||||
|
||||
/ {
|
||||
model = "Wiko Pulp 4G";
|
||||
compatible = "wiko,chuppito", "qcom,msm8916";
|
||||
chassis-type = "handset";
|
||||
|
||||
aliases {
|
||||
mmc0 = &sdhc_1; /* eMMC */
|
||||
mmc1 = &sdhc_2; /* SD card */
|
||||
serial0 = &blsp_uart2;
|
||||
};
|
||||
|
||||
chosen {
|
||||
stdout-path = "serial0";
|
||||
};
|
||||
|
||||
backlight: backlight {
|
||||
compatible = "pwm-backlight";
|
||||
pwms = <&pm8916_pwm 0 100000>;
|
||||
brightness-levels = <0 255>;
|
||||
num-interpolated-steps = <255>;
|
||||
default-brightness-level = <255>;
|
||||
enable-gpios = <&tlmm 119 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-0 = <&button_backlight_default>;
|
||||
pinctrl-names = "default";
|
||||
};
|
||||
|
||||
gpio-hall-sensor {
|
||||
compatible = "gpio-keys";
|
||||
pinctrl-0 = <&gpio_hall_sensor_default>;
|
||||
pinctrl-names = "default";
|
||||
label = "Hall Effect Sensor";
|
||||
|
||||
event-hall-sensor {
|
||||
label = "Hall Effect Sensor";
|
||||
gpios = <&tlmm 117 GPIO_ACTIVE_LOW>;
|
||||
linux,input-type = <EV_SW>;
|
||||
linux,code = <SW_LID>;
|
||||
linux,can-disable;
|
||||
};
|
||||
};
|
||||
|
||||
gpio-keys {
|
||||
compatible = "gpio-keys";
|
||||
pinctrl-0 = <&gpio_keys_default>;
|
||||
pinctrl-names = "default";
|
||||
label = "Buttons";
|
||||
|
||||
button-volume-up {
|
||||
label = "Volume up";
|
||||
gpios = <&tlmm 107 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_VOLUMEUP>;
|
||||
};
|
||||
};
|
||||
|
||||
usb_id: usb-id {
|
||||
compatible = "linux,extcon-usb-gpio";
|
||||
id-gpios = <&tlmm 110 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-0 = <&usb_id_default>;
|
||||
pinctrl-names = "default";
|
||||
};
|
||||
};
|
||||
|
||||
&blsp_i2c2 {
|
||||
status = "okay";
|
||||
|
||||
magnetometer@c {
|
||||
compatible = "asahi-kasei,ak09911";
|
||||
reg = <0x0c>;
|
||||
vdd-supply = <&pm8916_l17>;
|
||||
vid-supply = <&pm8916_l6>;
|
||||
reset-gpios = <&tlmm 120 GPIO_ACTIVE_LOW>;
|
||||
pinctrl-0 = <&mag_reset_default>;
|
||||
pinctrl-names = "default";
|
||||
mount-matrix = "1", "0", "0",
|
||||
"0", "1", "0",
|
||||
"0", "0", "1";
|
||||
};
|
||||
|
||||
proximity@48 {
|
||||
compatible = "sensortek,stk3310";
|
||||
reg = <0x48>;
|
||||
interrupts-extended = <&tlmm 113 IRQ_TYPE_EDGE_FALLING>;
|
||||
pinctrl-0 = <&proximity_int_default>;
|
||||
pinctrl-names = "default";
|
||||
};
|
||||
|
||||
imu@68 {
|
||||
compatible = "invensense,mpu6880";
|
||||
reg = <0x68>;
|
||||
interrupts-extended = <&tlmm 115 IRQ_TYPE_EDGE_FALLING>;
|
||||
vdd-supply = <&pm8916_l17>;
|
||||
vddio-supply = <&pm8916_l6>;
|
||||
pinctrl-0 = <&imu_int_default>;
|
||||
pinctrl-names = "default";
|
||||
mount-matrix = "0", "-1", "0",
|
||||
"-1", "0", "0",
|
||||
"0", "0", "-1";
|
||||
};
|
||||
};
|
||||
|
||||
&blsp_i2c5 {
|
||||
status = "okay";
|
||||
|
||||
touchscreen@39 {
|
||||
compatible = "syna,rmi4-i2c";
|
||||
reg = <0x39>;
|
||||
interrupts-extended = <&tlmm 13 IRQ_TYPE_EDGE_FALLING>;
|
||||
vdd-supply = <&pm8916_l17>;
|
||||
vio-supply = <&pm8916_l6>;
|
||||
pinctrl-0 = <&touchscreen_default>;
|
||||
pinctrl-names = "default";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
syna,startup-delay-ms = <100>;
|
||||
syna,reset-delay-ms = <160>;
|
||||
|
||||
rmi4-f01@1 {
|
||||
reg = <0x1>;
|
||||
syna,nosleep-mode = <1>;
|
||||
};
|
||||
|
||||
rmi4-f11@11 {
|
||||
reg = <0x11>;
|
||||
syna,sensor-type = <1>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&blsp_uart2 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&gpu {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&mdss {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&mpss_mem {
|
||||
reg = <0x0 0x86800000 0x0 0x5600000>;
|
||||
};
|
||||
|
||||
&pm8916_codec {
|
||||
qcom,hphl-jack-type-normally-open;
|
||||
};
|
||||
|
||||
&pm8916_mpps {
|
||||
pwm_out: mpp4-state {
|
||||
pins = "mpp4";
|
||||
function = "digital";
|
||||
power-source = <PM8916_MPP_VPH>;
|
||||
output-low;
|
||||
qcom,dtest = <1>;
|
||||
};
|
||||
};
|
||||
|
||||
&pm8916_pwm {
|
||||
pinctrl-0 = <&pwm_out>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pm8916_resin {
|
||||
linux,code = <KEY_VOLUMEDOWN>;
|
||||
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pm8916_rpm_regulators {
|
||||
pm8916_l17: l17 {
|
||||
regulator-min-microvolt = <2850000>;
|
||||
regulator-max-microvolt = <2850000>;
|
||||
};
|
||||
};
|
||||
|
||||
&pm8916_vib {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sdhc_1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sdhc_2 {
|
||||
pinctrl-0 = <&sdc2_default>, <&sdc2_cd_default>;
|
||||
pinctrl-1 = <&sdc2_sleep>, <&sdc2_cd_default>;
|
||||
pinctrl-names = "default", "sleep";
|
||||
cd-gpios = <&tlmm 38 GPIO_ACTIVE_HIGH>;
|
||||
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sound {
|
||||
audio-routing = "AMIC1", "MIC BIAS Internal1",
|
||||
"AMIC2", "MIC BIAS Internal2";
|
||||
};
|
||||
|
||||
&tlmm {
|
||||
button_backlight_default: button-backlight-default-state {
|
||||
pins = "gpio119";
|
||||
function = "gpio";
|
||||
drive-strength = <2>;
|
||||
bias-disable;
|
||||
};
|
||||
|
||||
gpio_hall_sensor_default: gpio-hall-sensor-default-state {
|
||||
pins = "gpio117";
|
||||
function = "gpio";
|
||||
drive-strength = <6>;
|
||||
bias-pull-up;
|
||||
};
|
||||
|
||||
gpio_keys_default: gpio-keys-default-state {
|
||||
pins = "gpio107";
|
||||
function = "gpio";
|
||||
drive-strength = <2>;
|
||||
bias-pull-up;
|
||||
};
|
||||
|
||||
imu_int_default: imu-int-default-state {
|
||||
pins = "gpio115";
|
||||
function = "gpio";
|
||||
drive-strength = <2>;
|
||||
bias-disable;
|
||||
};
|
||||
|
||||
mag_reset_default: mag-reset-default-state {
|
||||
pins = "gpio120";
|
||||
function = "gpio";
|
||||
drive-strength = <2>;
|
||||
bias-disable;
|
||||
};
|
||||
|
||||
proximity_int_default: proximity-int-default-state {
|
||||
pins = "gpio113";
|
||||
function = "gpio";
|
||||
drive-strength = <6>;
|
||||
bias-pull-up;
|
||||
};
|
||||
|
||||
sdc2_cd_default: sdc2-cd-default-state {
|
||||
pins = "gpio38";
|
||||
function = "gpio";
|
||||
drive-strength = <2>;
|
||||
bias-disable;
|
||||
};
|
||||
|
||||
touchscreen_default: touchscreen-default-state {
|
||||
touchscreen-pins {
|
||||
pins = "gpio13";
|
||||
function = "gpio";
|
||||
drive-strength = <2>;
|
||||
bias-pull-up;
|
||||
};
|
||||
|
||||
reset-pins {
|
||||
pins = "gpio12";
|
||||
function = "gpio";
|
||||
drive-strength = <2>;
|
||||
bias-disable;
|
||||
};
|
||||
};
|
||||
|
||||
usb_id_default: usb-id-default-state {
|
||||
pins = "gpio110";
|
||||
function = "gpio";
|
||||
drive-strength = <8>;
|
||||
bias-pull-up;
|
||||
};
|
||||
};
|
||||
|
||||
&usb {
|
||||
extcon = <&usb_id>, <&usb_id>;
|
||||
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_hs_phy {
|
||||
extcon = <&usb_id>;
|
||||
};
|
||||
|
||||
&venus {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&venus_mem {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&wcnss {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&wcnss_iris {
|
||||
compatible = "qcom,wcn3620";
|
||||
};
|
||||
|
||||
&wcnss_mem {
|
||||
status = "okay";
|
||||
};
|
||||
Loading…
Reference in New Issue
Block a user