mirror of
https://github.com/torvalds/linux.git
synced 2026-05-29 17:43:52 +02:00
iommu: Fix mapping check for 0x0 to avoid re-mapping it
Commit789a5913b2("iommu/amd: Use the generic iommu page table") introduces the shared iommu page table for AMD IOMMU. Some bioses contain an identity mapping for address 0x0, which is not parsed properly (e.g., certain Strix Halo devices). This causes the DMA components of the device to fail to initialize (e.g., the NVMe SSD controller), leading to a failed post. Specifically, on the GPD Win 5, the NVME and SSD GPU fail to mount, making collecting errors difficult. While debugging, it was found that a -EADDRINUSE error was emitted and its source was traced to iommu_iova_to_phys(). After adding some debug prints, it was found that phys_addr becomes 0, which causes the code to try to re-map the 0 address and fail, causing a cascade leading to a failed post. This is because the GPD Win 5 contains a 0x0-0x1 identity mapping for DMA devices, causing it to be repeated for each device. The cause of this failure is the following check in iommu_create_device_direct_mappings(), where address aliasing is handled via the following check: ``` phys_addr = iommu_iova_to_phys(domain, addr); if (!phys_addr) { map_size += pg_size; continue; } ```` Obviously, the iommu_iova_to_phys() signature is faulty and aliases unmapped and 0 together, causing the allocation code to try to re-allocate the 0 address per device. However, it has too many instantiations to fix. Therefore, use a ternary so that when addr is 0, the check is done for address 1 instead. Suggested-by: Robin Murphy <robin.murphy@arm.com> Fixes:789a5913b2("iommu/amd: Use the generic iommu page table") Signed-off-by: Antheas Kapenekakis <lkml@antheas.dev> Reviewed-by: Vasant Hegde <vasant.hegde@amd.com> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
This commit is contained in:
parent
39c20c4e83
commit
0a4d00e2e9
|
|
@ -1213,7 +1213,11 @@ static int iommu_create_device_direct_mappings(struct iommu_domain *domain,
|
|||
if (addr == end)
|
||||
goto map_end;
|
||||
|
||||
phys_addr = iommu_iova_to_phys(domain, addr);
|
||||
/*
|
||||
* Return address by iommu_iova_to_phys for 0 is
|
||||
* ambiguous. Offset to address 1 if addr is 0.
|
||||
*/
|
||||
phys_addr = iommu_iova_to_phys(domain, addr ? addr : 1);
|
||||
if (!phys_addr) {
|
||||
map_size += pg_size;
|
||||
continue;
|
||||
|
|
|
|||
Loading…
Reference in New Issue
Block a user